The Actions panel menu gets Select Object…, which opens Set Selection with a Note field and
Case Sensitive and Whole Word. The step it inserts runs the new select.byNote command, which
replaces the selection with every object that can be selected whose note matches. When none
matches, the selection, its Puppet Warp pins and the active Appearance item stay as they were,
and playback stops with an error. Action set files that hold the step are saved as version 4.
object.objectsOnPath.selectMember and object.objectsOnPath.moveMember
change only the document and its selection, as the other Objects on
Path commands do, so both join the commands a plug-in may call when its
manifest lists them.
A Cutting Tools add-on command (Object › Plug-ins › Cutting Tools › Weed Box
and Lines…, `addon.cutting.weed`) for vinyl cutting: around the selected art
it adds a weed box, a rectangle at a margin outside the art's bounds, and
weeding lines across the box, horizontal, vertical or both, by count or by
spacing. Each line runs from one side of the box to the other and is left out
over the art and within a gap of its outlines, so it stops at the art and the
waste lifts off in pieces. The lines and the box are straight paths stroked
in a chosen color swatch ([Registration] by default) with no fill, in one
group named Weeding on top of the current layer, selected, as one undo step.
While a clip group, or a group inside one, is edited in isolation, the
group goes on top of the container that holds the outermost clip group
around it.
The art is measured by the outlines a cutter cuts: closed paths by their fill
rule (the hole of an even-odd compound path gets lines too), open paths as
lines, type by its glyph outlines, images by their frames, placed files by
the art they show (by their boxes when the file can't be read), symbol
instances by their art, and blends and other live objects by the art they
draw. A clip group, and an object selected inside one, is measured by what
shows inside the region its clipping paths clip to, and a clipping path
selected on its own as its clip group. Art in a hidden group or layer is
left out. The command refuses an empty selection, art with no outlines, bad
params, and art or lines too complex to measure, with a message.
The dialog has Preview; a Spacing above 0 is used instead of the Count.
Docs: docs/mcp.md (Cutting Tools add-on) and docs/target-app-parity.md.
Object › Plug-ins › Cutting Tools › Stencil Bridges… (`addon.cutting.bridges`)
cuts strips of a set width out of the selected art so that a stencil cut
from it holds together: every island (the inside of an O, A or 8, a hole in
a shape) stays joined to the sheet, directly or through another island.
Bridges take the shortest crossings that fit first, then spread around each
island up to the count asked for, at least two widths apart. They run
vertically, horizontally or along the shortest crossing among 12
directions 15° apart.
- The art is measured by the area its outlines enclose, whatever their
paint, with hidden objects left out; type by its glyph outlines, without
converting the type. The result is one compound path with the strips cut
out, painted as the topmost selected shape with outlines, in the place of
the topmost selected object with outlines. Selected objects with no
outlines in the art stay where they are.
- Keep Original (on by default) moves the selected objects that make up the
art to a new hidden layer, Stencil Original; off replaces them.
- Art with no islands, or none a bridge of the width fits, is left as it is
with a message and no undo step. Islands the cut result still encloses
are counted in `unbridged`, with a message. Otherwise the run is one undo
step.
- Curves are followed within a twentieth of the width (0.002 to 0.25 pt).
Art that reaches more than 10000000 pt from the origin or has more than
200000 anchors is refused before it is combined. Art is also refused when
its combined area has more than 4000 outlines, when its outlines need
more than 200000 straight segments, or when placing the outlines or
joining every island takes more work than a fixed budget allows; when
the budget runs out while extra bridges are added, the bridges found so
far are kept.
Tests in vectorcraft-pathops, vectorcraft-engine and vectorcraft-ui-egui,
command_sweep cases, catalog rows in all 27 languages, docs/mcp.md, the
evidence list in docs/target-app-parity.md and the ROADMAP progress log.
Art Alt-dragged (Option-dragged on macOS) from the canvas onto a
scatter, art or pattern brush in the Brushes panel becomes its art
(brush.replaceArt). When strokes use the brush, the app checks the art
first, then a dialog offers Apply to Strokes, which redraws them with
the new art, Leave Strokes, which keeps the brush and its strokes as
they were and adds "<name> copy" with the new art as the current brush,
and Cancel. Each change is one undo step.
A pattern brush takes back the tile groups brush.placeArt places, frames
included, and takes other art as its side tile. Calligraphic and
bristle brushes, an empty selection and art with no width are refused.
Art Alt-dragged off the canvas now reaches the panels as the art the
drag started with. Before, the panels got the ids of the copy the drag
previews, which no longer exist once the release over a panel ends the
move.
brush.new now also measures a symbol instance in the selected art by its
symbol's art when it checks that the art has width.
Docs: docs/mcp.md, docs/target-app-parity.md.
A scatter, art or pattern brush dragged from the Brushes panel onto an
empty part of the canvas places a copy of its art there to edit,
centered where it is dropped (brush.placeArt). Dropped on a path, a
brush is still applied to it. A pattern brush is placed as its tiles in
a row, 10 pt apart, each in a group named for its tile, with an
unpainted rectangle at the back of a tile that has a repeat frame.
Calligraphic and bristle brushes have no art and are refused. A symbol
instance in the art is measured by its symbol's art.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Blend panel gets a Create Spine menu (Auto, Always, Never) under Make,
and object.blend.createSpine {mode?} sets or reads it. It is kept with the
preferences, is not an undo step and leaves blends already made as they are.
object.blend.make takes createSpine to choose for one new blend.
Auto and Always give every new blend a straight spine, as before. Never
makes a blend without one: its steps sit where a straight spine puts them,
object.blend.info reports hasSpine: false, easing is refused and dimmed,
Reverse Spine and the spine point commands refuse it, Release gives back
no spine path, and Replace Spine gives it a spine. A blend taking more keys
keeps whether it has a spine. Native files save noSpine; older files open
with their spines.
Builds on #5177 by adambelis.
A new built-in add-on, Image Tools (Object › Plug-ins › Image Tools),
adds Remove Background… (`addon.image.removeBackground`). It makes the
background of the selected images transparent by lowering the alpha of
their own pixels, in one undo step, with no service or model. The
background is the most common color along the image's edges, the
average of the image's corners, or colors the user picks. Contiguous
(on by default) clears it only where it reaches in from an edge; off,
it is cleared wherever it is. Tolerance and Softness (0 to 100, 10 by
default) set how near a color must be to be cleared and the band over
which pixels fade out. Match measures that nearness as the RGB
distance or as the largest difference on one channel. It is a
VectorCraft addition.
- The image stays an image: an embedded PNG with alpha, the source's
ICC profile and resolution, and 16 bits or gray when the source is.
A linked image is embedded and keeps its Placement Options.
- When the edges hold at least as many clear pixels as pixels of their
most common color, edge mode clears nothing, so a second run leaves
the subject alone. Corner mode leaves clear corners out of the
average and clears nothing when all four are clear.
- With Match set to Each Channel, a tolerance of t / 255 × 100 clears
the colors within t 8-bit steps on every channel.
- A CMYK image, a linked image that shows its preview, an image that
would need more than the decode allowance (checked from its header)
and a result with no pixel left are refused, and the document stays
as it was. When no pixel changes, no undo step is added. The result
reports `cleared`, the pixels made fully clear.
- Picked colors are hex colors, with or without `#`, or black, white,
red, green or blue.
- The dialog opens with Preview off; with Preview on, the canvas shows
the result, and Cancel puts the image back. While the dialog
previews, the session keeps the images' decoded pixels (at most
128 MiB, 32 MiB in the web app) so each preview step does not decode
them again, and releases them when the dialog closes with OK or
Cancel. A run that is not a preview step keeps nothing.
Docs: docs/mcp.md (Image Tools add-on), docs/target-app-parity.md.
select.object.notAlignedToPixelGrid selects the paths (not guides) and
compound paths whose pixel-aligned property is off, whatever their
coordinates, and returns {count}. It looks into groups but not into
compound paths, which take the property as one object, and leaves out
hidden, locked and template art and, in isolation mode, everything
outside the isolated object. It replaces the selection, clears it when
nothing matches, and records no undo step.
The menu item goes under Select › Object with rows in every complete
catalog, and plug-ins may call the command like the other Select ›
Object filters. Docs: docs/mcp.md, docs/target-app-parity.md.
Double-clicking a paragraph style, or Paragraph Style Options... in the
Paragraph Styles panel menu, opens Paragraph Style Options
(`ui.paraStyleOptions`) instead of the rename dialog. Its sections are
General (name and stored attributes), Basic Paragraph Formats (Alignment,
indents, space before and after), Composition (composer, Roman Hanging
Punctuation), Hyphenation and Justification. OK runs the new
`paraStyle.edit {name, to, attrs}`, which replaces the name and attributes
in one undo step; paragraphs that use the style keep their local
overrides. Fields left as they were keep the style's values, empty fields
leave an attribute unset, Preview can be canceled, and each section's
Reset Panel (`ui.paraStyleOptions.resetPanel`) clears only its own
attributes. New Paragraph Style shows the same sections, filled in from
the selected paragraph or the interface language's paragraph defaults.
`paraStyle.new`, `paraStyle.setAttrs` and `paraStyle.edit` now reject a
changed indent or space outside -1296 to 1296 pt, Hyphenation counts and
zone outside their ranges, Justification values outside their ranges or
out of Minimum/Desired/Maximum order, and tab positions outside 0 to
100000 pt. A value the style already holds is kept.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Symbols panel menu gains Sort by Name, which puts the document's
symbols in name order, ignoring case, as one undo step
(`symbol.sortByName`). Symbols whose names differ only in case keep their
order, the current symbol stays current, and no undo step is added when
the symbols are already in order.
The menu's Thumbnail View and List View become Thumbnail View, Small List
View (18-point rows, 14-point thumbnails) and Large List View (the former
List View's 26-point rows and 22-point thumbnails), as in the Graphic
Styles panel. Clicking, double-clicking and dragging a symbol work the
same in every view.
Docs: docs/mcp.md, docs/target-app-parity.md.
Type › Type on a Path › Center on Top and Center on Bottom
(type.pathCenter.top and type.pathCenter.bottom, also on the Contextual
Task Bar for type on a closed path) slide the type along its path so that
the middle of the span between its brackets lands on the path's topmost or
bottommost point as the object is drawn, after its transform. On a level
stretch, such as a rectangle's top edge, the middle of the stretch is used.
The span keeps its length, and the first paragraph is set to Center unless
it is Center or Justify Center. The type is not flipped. Type on an open or
compound path, type in a thread, and type on a path with no length or no
height are refused with an error that names them. When the type is already
centered there, no undo step is recorded. This is VectorCraft's own
behavior.
Docs: docs/mcp.md, docs/target-app-parity.md.
Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar
for type on a path) scales the text by one factor so it fills the span
between its start and end brackets, and the layout fits it again after
each edit to the text, the path or a bracket. The first character's
size moves in 0.1 pt steps within 0.1 to 1,296 pt. Turning it off, or
threading the type, keeps the sizes it was drawn at.
- The model saves `dynamicText` only when on.
- SVG, the legacy .ai writer and the .ai editing data write the drawn
sizes through `vectorcraft_text::drawn`; the editing data warns that
the setting is not written.
- Shrink Text to Fit and Dynamic Text step the size the Character panel
shows when a size measures the cap height, x-height or ICF box.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Part of #4134.
effect.deferredStatus only lists the document's deferred stages, so it joins reviewed::ALLOWED. effect.refreshDeferred runs plug-in effects again, so it joins reviewed::DENIED, which fixes every_command_is_reviewed.
main added text.setPathHandle, which moves a handle of type on a path's path in the document. Commands a plug-in may call are listed one by one, so it goes in the allowed list.
A filter at plug-in API level 2 with the new `commands` permission names
the commands it may run in its manifest's `commandAllowlist` and runs
them with `env.vc_call`, reading each result with `env.vc_call_result`.
Each call runs through Session::execute on the run's document and sees
what earlier calls changed; the calls and the filter's output are one
undo step, and a run that fails, is cancelled or makes a failed call
leaves the documents, their history and the session state the commands
change as they were.
Commands that touch files, the clipboard, preferences, the view,
scripts, actions, plug-ins, open documents or the undo history are never
callable, and every other command must be listed as allowed in
cmd/plugin_call/reviewed.rs, so a new command is refused until placed.
Calls are capped at 1,000 a run, 8 MiB a call and 64 MiB a run, and each
costs instructions from the run's budget. plugin.install refuses a
manifest that lists a refused command and reports unknown ids;
plugin.inspect lists both, and the approval dialog lists the commands.
Refs #2186
dotCooCoo