With #8144, an edge pixel between black and white is read as a blend of black and white when paths of up to 5 steps reach past a gray between them both ways. On edges blurred by 0.6 pixel, the outer pixels of a gray band 3 or 4 pixels wide along black also met that rule: their first step outward is white, and the path toward black crosses the band's gray. A 3 px band at that blur kept 16 of its 48 samples gray, against 46 before #8144. When the first step of one path already stands for its color (the edge on that side is sharp), the other path now stops at a pixel of the gray it comes to before getting past it. Bands 2 to 4 pixels wide blurred by 0.6 pixel keep 306 of their 432 samples gray (207 with #8144, 324 before it). Edges blurred by 1 to 3 pixels trace as with #8144, except that a light gray (230) blurred by 1.5 pixels leaves at most 4 slivers of up to 3 pixels beside the disc. The band test now also runs at blurs of 0.6, 1 and 3 pixels, the spoke test at 2 pixels, and the stroke test's ranges are the measured ones. The docs state the distance rule as the code computes it and limit each measured claim to the blur it was measured at.
18 KiB
Adjusting an Image Trace
Select a placed raster image, then choose Image Trace or a preset from its arrow in Properties or the Control bar. The original image stays inside the tracing object so that subsequent adjustments always use the original pixels.
To adjust the result, select the tracing object and click Image Trace in Properties or the image icon in the Control bar: the Image Trace panel opens with Advanced expanded. An existing floating or docked panel is activated in its current location. Opening the controls does not add a document undo step.
| Control | Range | Effect |
|---|---|---|
| Threshold (Black and White) | 0–255 | Higher values include lighter pixels as black ink. |
| Paths | 0–100% | Higher values fit outlines more closely to the image. |
| Corners | 0–100% | Higher values preserve more sharp turns. |
| Noise | 1–100 px | Suppresses small connected regions; higher values remove more small details. |
| Method | Abutting / Overlapping | Chooses shared boundaries or stacked overlapping paths. |
| Create | Fills / Strokes | Creates filled areas, stroked lines, or both. |
| Ignore Color | Color picker | Leaves out the selected color (white by default). |
The built-in presets other than Auto Color and Flat Logo all use Paths 50, and so do their enhanced versions. Among those presets, Corners is 100 in Technical Drawing, 75 in Default, Black and White Logo, Line Art and Outline, and 50 in the other eight. Noise is 1 px in Technical Drawing, 5 in High Fidelity Photo and Black and White Logo, 8 in 6 Colors and 16 Colors, 10 in Low Fidelity Photo, 15 in 3 Colors and Shades of Gray, 20 in Sketched Art, Line Art and Outline, 25 in Default, and 90 in Silhouettes (see image-trace-quality.md).
Sliders apply on release, and their numeric fields can be edited directly. Each committed adjustment re-traces the selected object as one undo step and changes the preset to Custom. While dragging, the preset and Enhanced row stay in place until release so the slider retains its active interaction. Committed settings are synchronized immediately, so Undo also restores the panel values before its next frame. View can show the source image, the result, outlines, or combinations without re-tracing. Use Expand when finished to turn the result into ordinary editable vector objects; after expanding, the tracing settings are no longer available. Release restores the source.
Auto Color (the Automatic palette) counts flat art's colours by area, and also keeps colours too rare for that count when they are distinct and drawn as regions of their own (a stem, a highlight, a white beside a cream), at most six; scattered specks of a colour add none. Adobe does not document how its own palettes are chosen; this is VectorCraft's own method (see image-trace-quality.md).
Keep Colors. "keepColors": ["#rrggbb", …] in the params of imageTrace.make or
imageTrace.makeAndExpand traces only the palette colors within about 30 levels of a listed color,
the distance Ignore Color matches by, and leaves the other colors out. With Method Abutting, the paths
of the kept colors are the same as in a trace of every color. With Method Overlapping, a kept color's
paths reach under the kept colors above it in the stack and not under the colors left out, as with
Ignore Color. An empty list traces every color, and a value that is not a six-digit hex color is
refused. With Ignore Color as well, a kept color that Ignore Color matches is still left out. Flat
Logo does not use keepColors: it traces the colors named in logoColors, or the colors it finds.
The reply's warnings name each listed color that matches none of the colors the trace found. When
nothing is traced because no listed color matches, because Ignore Color leaves out every area of the
ones that match, or because the ones that match produce no paths, the first warning says so, and the
status bar shows it. In Flat Logo mode the
warning says that keepColors is not used.
Document Library color groups. With Palette › Document Library and Library › Document Swatches,
the panel's Colors menu traces with every document swatch (All) or with the colors of one
color group from the Swatches panel, as the public
Image Trace panel options
page (archived)
describes Document Library. In the params of imageTrace.make or imageTrace.makeAndExpand,
"colorGroup": "<name>" names the group. It needs "mode": "color", "palette": "documentLibrary" and
"library": "document"; a colorGroup with a nonempty name and any other mode, palette or library is refused. An
empty name names no group and is accepted with any mode, palette or library; with Document Library and
"library": "document" it traces with every document swatch. A group whose name matches exactly is used first, then one whose name differs only in case. At
most colors of its colors are used. A missing group and a group with no solid colors are refused. Choosing another
mode, palette or library in the panel clears the group. A group the active document does not have shows as All
and traces as All.
Document Library colors. With Library › Document Swatches, with or without a color group, traced fills and strokes take the library color without a link to its swatch. This includes global, spot and tint swatches. Tints trace at the color shown by the tint swatch. Editing a swatch later does not recolor the trace. Colors from other swatch libraries are also unlinked.
Ignore Color, background only. Ignore Color leaves out every area of the chosen color. With
"ignoreBackground": true beside "ignoreWhite": true in the params of imageTrace.make or
imageTrace.makeAndExpand, it leaves out only the areas of that color that reach the image's edge,
joined through pixels above, below or to either side, and traces the areas of it that other colors
enclose: black line work inside a panel stays when the black around the panel is left out. Flat Logo
leaves out every white area whatever ignoreBackground is.
Document Library traces with the library's colors as they are. Each pixel takes the library color nearest to it in lightness and hue, with a difference in hue or chroma counted three times as much as one in lightness, so a gray or a muted brown takes a black, white or other neutral library color rather than a saturated color of the same lightness. Abutting and Overlapping. Abutting is the default Method, and the Default, Auto Color, 3 Colors, 6 Colors and 16 Colors presets use it. With Abutting, two neighboring colors share one exact edge. The canvas smooths the edges of each path on its own, so each of the two paths covers only part of the pixels along that edge, and a thin line of the background can show between the colors. Web browsers and PDF viewers usually draw an exported SVG or PDF file the same way and show the same line. Raster exports (PNG, JPEG, TIFF and the other bitmap formats) with None anti-aliasing do not show it at any size. Raster exports with Art Optimized anti-aliasing, the default, do not show it up to 10 million pixels and 16,384 pixels on a side. A raster export shows the line as the canvas does when it uses Type Optimized anti-aliasing, or when it uses Art Optimized and is larger than either limit. Overlapping stacks the colors instead: a lower color continues under the edge of the color above it, and no background shows along that edge. With Fills and without Create Strokes, Overlapping also follows a fill rule of VectorCraft's own: each shape is filled whole, and the area of other colors that a shape encloses is traced again as shapes of its own and stacked above it. Each enclosed outline is then fitted once. The Image Trace presets page describes Overlapping as stacking shapes where it can and overlapping their edges elsewhere. A shape keeps a hole where the enclosed area holds a transparent pixel or a color that Ignore Color or Keep Colors leaves out. A hole smaller than Noise is filled with the shape's own color, as before. The pixels of an area inside other areas are scanned once more for each area around it, within a work budget of VectorCraft's own: four times the image's pixels (counted as at least 65,536) times its colors, with each area costing its bounding box times the colors in it. An area that costs more than what is left of the budget keeps its holes and is not charged, so a smaller area after it can still be filled. With Create Strokes, or without Fills, shapes keep their holes.
Flat Logo with named colors. With logoColors named, Flat Logo decides whether the image is flat
art by the image's own colors. It finds them the same way as when no colors are named, and looks for as
many colors as are named, with white, or as the Colors setting gives, whichever is more. How far the named colors
are from the image's colors does not change whether the image is refused. While no more colors are
named than the Colors setting, an image is refused exactly when it is refused without named colors.
The trace then uses only the named colors, and white while white is a color of its own. An area of a
color that was not named is traced too: each of its pixels goes to the named color, white or
transparent that has the largest share in the blend of them that comes closest to the pixel.
Flat Logo with a color between two others. When a traced color lies between two others, as a gray lies between black and white, an anti-aliased edge pixel between the outer two is also a blend of the middle color and one of them. Flat Logo then reads the pixel as a blend of the outer two when the pixel lies on an edge between them and that blend lies nearer the pixel than the blend with the middle color. The pixel lies on such an edge when, along the line between the outer two colors, it reaches a pixel darker than the middle color in at most 5 steps, each to the neighbor that lies farthest toward the darker color while the pixels keep getting darker, and reaches a pixel lighter than the middle color the same way. When the first step toward one outer color comes to a pixel that is less than half as far from that color as from any other traced color, the path toward the other outer color stops at the first pixel within 4 levels (out of 255) of the middle color that it comes to before it gets past the middle color. A blend lies as near the pixel as the farther of its colors' nearest flat areas within 6 pixels. The blend of the outer two also lies as near as the larger of the two step counts, when that number is smaller. Each path counts its steps to the first pixel past the middle color that is less than half as far from that path's outer color as from any other traced color.
A black disc beside a gray square on white traces with one gray shape, the square, and no gray slivers around the disc, when its edges are sharp or blurred by up to 2 pixels, with the colors found or named. A light gray (230) blurred by 1.5 pixels leaves up to 4 slivers of up to 3 pixels. With the colors named and edges blurred by 3 pixels, a gray of 128 is still one shape, a gray of 200 leaves 4 slivers with no area, and a light gray leaves 8 slivers of up to 21 pixels. An image with noise of a level or more in its pixels can still leave gray slivers along the disc.
With sharp edges, a gray stroke two or three pixels wide beside black has no darker pixel next to it and stays gray, and so does a gray band along black. With edges blurred by 0.6 pixel, as by ordinary anti-aliasing, a gray band 3 to 8 pixels wide along black keeps at least 4 of every 5 of its pixels gray. On edges blurred by a pixel or more, gray near black loses pixels. A soft-edged gray band along black traces as black and white, with at most 1 of every 16 of its pixels left gray, when it is up to 4 pixels wide at blurs of 1.5 and 2 pixels, up to 3 pixels wide at a blur of 3 pixels, or 2 pixels wide at a blur of 1 pixel. A wider band loses part of its gray next to black, and one 8 pixels wide keeps at least half of it at blurs of 1 to 3 pixels. A light gray stroke 2 pixels wide, blurred by 1.5 pixels, keeps about 10 of 34 pixels gray when it lies 2 pixels from black and about 25 when it lies 4 pixels away. It keeps all of them 6 or 8 pixels away, where the path toward black ends at the gray, before the white that lies between the stroke and black. A soft-edged gray stroke 2 or 3 pixels wide running straight out of black, blurred by 1 or 1.5 pixels, loses 3 or 4 of the 16 pixels nearest black. Blurred by 2 pixels, one 3 pixels wide loses 2 or 3 of them, and one 2 pixels wide traces as black and white along its whole length. A soft-edged gray stroke about two pixels wide lying along black traces as black and white, and one about three pixels wide lying along black can lose most or all of its gray when it is short (12 pixels long or less). A line of gray one pixel wide between black and white stays gray when at least 13 of its pixels touch: such a line and a straight black-to-white edge whose pixels are as light as the gray give the same pixels, and both trace as gray. A one-pixel gray line between black and white that is shorter than 13 pixels, falls between pixels or is blurred traces as black and white. A flat area whose color lies between two named colors, as when the colors are named some levels off, counts as holding the named colors it is a blend of, and so do the pixels of exactly its color that touch it.
The same holds when the left-out color lies beyond both colors of the edge, as a pale gray ground lies beyond a gray panel and a charcoal disc: an edge pixel between the panel and the disc is also a blend of the ground and the disc. Flat Logo reads it as a blend of the panel and the disc when, along the line through the three colors, the pixel has a neighbor on each side of it, no neighbor lies past the panel toward the ground, and a chain of neighbors, each nearer the panel's color than the one before, leads from the pixel, in at most 6 steps, to the panel's color or to a flat area of the panel. The same rule applies to a left-out color darker than both colors of the edge, and to colors that are not grays. A charcoal disc on a gray panel on a paler ground then traces with no slivers of the ground around it when its edges are sharp or blurred by 0.7 pixel. An edge blurred by a pixel or more can still leave slivers of the ground. The pixels of a pale line on the disc, whether one pixel wide, blurred over three pixels or falling between two pixels, and the edge of a gap of the ground's color between the disc and the panel keep the ground in their blends.
Large images. An image of more than 1500 pixels on a side is traced as any other, only more
slowly, and the trace says so: imageTrace.make returns the note in warnings and the status bar
shows it (the results optimization
page describes the same warning for images over 1500 px). An image of more than 64 megapixels (up to
192) is traced from a copy scaled down to 64 megapixels, and the trace says that too. Flat Logo traces at
most 1024 pixels on a side: a larger decoded raster is averaged down in whole-number blocks first (a 1025-pixel
image is traced at 513, and a 16,000 × 12,000 image, decoded at 9,459 × 7,094, is traced at 946 × 710), and the trace names both sizes in warnings. Flat Logo gives that note in place
of the slower-trace note for an image over 1500 pixels and in place of the 64-megapixel note. An image at most
1024 pixels on a side is traced at its own size, also when the named logoColors differ slightly from the
image's colors. Only an image with more than 150,000 different pixel values to unmix (values that are
not exactly one traced color, and values that are, at pixels outside a flat area) is averaged down
further: the factor doubles until at most 150,000 remain or the working copy has at
most 16,384 pixels (at most six times). A trace that would
make more than 8,000,000 anchor points (2,000,000 on the web) is refused to protect memory, with advice:
raise Noise, lower Paths or Colors, or pick a lower-fidelity preset. A trace keeps
about 90 bytes an anchor; a 4000 × 3000 photo at Limited 64 colors, Paths 90, Corners 25 and Noise 4
makes about 1.9 million.
Tracing in the background. On the desktop a trace runs on a thread of its own, so the window
keeps answering while a photo or a large image is traced (#3098). Make, Make and Expand, the task
bar's Image Trace and the panel's Trace and presets start it. The status bar says "Tracing the
image…", and after 0.4 s a progress window shows how many of its colours are traced, with Cancel
(also Esc, imageTrace.cancelRuns) and Continue in Background (imageTrace.hideRuns). The result is
one undo step, as before. A new trace of the same object replaces one still running. A trace whose
image or settings changed meanwhile changes nothing, and the status bar says to trace it again.
imageTrace.make and imageTrace.makeAndExpand from MCP, scripts and the control channel trace at
once and return their result, as every trace on the web does.
These controls use VectorCraft's existing tracing algorithm. Parameter effects follow its
implementation; they do not claim pixel-identical results with another application.
The terminology and general control behavior are described in the
public Image Trace panel documentation.
Regression coverage: crates/ui-egui/src/panels/image_trace.rs tests opening the panel,
a quick trace leaving it as it was, repeated opening, floating ownership, slider commits, visible threshold
changes, undo, and the Properties entry point. Tracing in the background:
crates/ui-egui/src/tests/trace_runs.rs. Tracer tests live in crates/trace/src/tests.rs.