Merge pull request #7179 from dotCooCoo/fix/place-read-own-document

Place: a file read apart from the session goes only into its document

crates/engine/src/cmd/place.rs

@@ -58,6 +58,9 @@ use crate::{EngineError, MAX_COORD};
 
 const PLACE: &str = "file.place";
 const QUEUE: &str = "file.place.queue";
+/// The error of a file read apart from the session while another document is active, or after the
+/// document it was read for closed ([`Session::place_read`], [`Session::place_queue_read`]).
+const NOT_ACTIVE: &str = "the document it was prepared for is no longer active";
 /// The most files one `file.place.queue` loads.
 const MAX_QUEUE: usize = 100;
 /// The longest thumbnail side `thumbnail` may ask for (px).
@@ -503,11 +506,13 @@ fn fit(natural: Rect, r: Rect) -> Affine {
     Affine::translate(r.center().to_vec2()) * Affine::scale(k) * Affine::translate(-natural.center().to_vec2())
 }
 
-/// What `file.place` takes from the session before it reads the file: the params, the object
-/// Replace swaps and the artboard under `at`, which a DXF drawing is laid out on
-/// ([`Session::prepare_place`]). [`PlaceJob::read`] reads and decodes the file without the session,
-/// on any thread.
+/// What `file.place` takes from the session before it reads the file: the document it places into,
+/// the params, the object Replace swaps and the artboard under `at`, which a DXF drawing is laid
+/// out on ([`Session::prepare_place`]). [`PlaceJob::read`] reads and decodes the file without the
+/// session, on any thread.
 pub struct PlaceJob {
+    /// The document it was prepared in (`DocState::uid`).
+    doc: u64,
     params: Value,
     old: Option<NodeId>,
     /// The object Replace swaps as it was when Place started.
@@ -560,10 +565,14 @@ impl Session {
 
     /// Run `file.place` with the params of `read` as a command (checked and journaled as any
     /// other) that places the file `read` holds instead of reading it again → `file.place`'s
-    /// reply. The object Replace swaps must still be in the document as it was when Place started;
-    /// when the selection changed meanwhile, `select.set` selects that object again first, so a
-    /// replay of the journal replaces the same object.
+    /// reply. The document Place started in must be the active one, and the object Replace swaps
+    /// must still be in it as it was when Place started; when the selection changed meanwhile,
+    /// `select.set` selects that object again first, so a replay of the journal replaces the same
+    /// object.
     pub fn place_read(&mut self, read: PlaceRead) -> Result<Value> {
+        if self.doc()?.uid != read.job.doc {
+            return Err(bad(PLACE, NOT_ACTIVE));
+        }
         let params = read.job.params.clone();
         if let Some(old) = read.job.old {
             let st = self.doc()?;
@@ -615,7 +624,7 @@ fn prepare(s: &Session, p: &Value) -> Result<PlaceJob> {
         (true, _) => return Err(bad(PLACE, "replace: select the one object to replace")),
     };
     let replaced = old.and_then(|id| st.doc.node(id)).cloned();
-    Ok(PlaceJob { params: p.clone(), old, replaced, target: board_at(&st.doc, at) })
+    Ok(PlaceJob { doc: st.uid, params: p.clone(), old, replaced, target: board_at(&st.doc, at) })
 }
 
 /// Place the file `read` holds in the active document.
@@ -755,6 +764,8 @@ fn queued_files(p: &Value) -> Result<Vec<Value>> {
 /// ([`Session::prepare_place_queue`]). [`QueueJob::read`] reads them without the session, on any
 /// thread.
 pub struct QueueJob {
+    /// The document it was prepared in (`DocState::uid`).
+    doc: u64,
     params: Value,
     files: Vec<Value>,
 }
@@ -762,6 +773,8 @@ pub struct QueueJob {
 /// The files [`QueueJob::read`] read, which [`Session::place_queue_read`] loads the place cursor
 /// with.
 pub struct QueueRead {
+    /// The document the files were read for (`DocState::uid`).
+    doc: u64,
     params: Value,
     entries: Vec<Value>,
     files: Vec<Value>,
@@ -776,13 +789,13 @@ impl QueueJob {
 
     /// Read every file for its size and thumbnail, as `file.place.queue` does, without the session.
     pub fn read(self) -> Result<QueueRead> {
-        read_queue(self.params, self.files)
+        read_queue(self.doc, self.params, self.files)
     }
 }
 
-/// Read each of `queued`, the files of `file.place.queue` with params `p`, for its size and
-/// thumbnail.
-fn read_queue(p: Value, queued: Vec<Value>) -> Result<QueueRead> {
+/// Read each of `queued`, the files of `file.place.queue` with params `p` for the document `doc`,
+/// for its size and thumbnail.
+fn read_queue(doc: u64, p: Value, queued: Vec<Value>) -> Result<QueueRead> {
     let thumbnail = p.get("thumbnail").and_then(Value::as_f64);
     let (mut entries, mut files, mut skipped) = (vec![], vec![], vec![]);
     for mut q in queued {
@@ -823,7 +836,7 @@ fn read_queue(p: Value, queued: Vec<Value>) -> Result<QueueRead> {
             }
         }
     }
-    Ok(QueueRead { params: p, entries, files, skipped })
+    Ok(QueueRead { doc, params: p, entries, files, skipped })
 }
 
 impl Session {
@@ -834,12 +847,17 @@ impl Session {
         has_doc(self).map_err(|why| EngineError::Disabled(QUEUE.into(), why))?;
         check_switches(params, &["link", "template"], QUEUE)?;
         check_numbers(params, &["thumbnail"], QUEUE)?;
-        Ok(QueueJob { params: params.clone(), files: queued_files(params)? })
+        let files = queued_files(params)?;
+        Ok(QueueJob { doc: self.doc()?.uid, params: params.clone(), files })
     }
 
     /// Run `file.place.queue` with the params of `read` as a command that loads the place cursor
-    /// with the files `read` holds instead of reading them again → `file.place.queue`'s reply.
+    /// with the files `read` holds instead of reading them again → `file.place.queue`'s reply. The
+    /// document the files were read for must be the active one.
     pub fn place_queue_read(&mut self, read: QueueRead) -> Result<Value> {
+        if self.doc()?.uid != read.doc {
+            return Err(bad(QUEUE, NOT_ACTIVE));
+        }
         let params = read.params.clone();
         self.queue_hand_off = Some(read);
         let r = self.execute(QUEUE, &params);

crates/engine/src/tests/place.rs

@@ -365,6 +365,95 @@ fn a_file_read_apart_from_the_session_replaces_what_was_selected_when_place_star
     }
 }
 
+/// Every open document with its art, selection and undo steps, and the journal, tool and tool
+/// options: what a refused hand-off leaves as it was.
+type Snapshot = (Vec<(u64, Arc<vectorcraft_doc::Document>, Vec<NodeId>, usize)>, usize, &'static str, Value);
+
+fn snapshot(s: &Session) -> Snapshot {
+    let docs = s.documents().iter().map(|d| (d.uid, d.doc.clone(), d.selection.objects.clone(), d.history.undo.len())).collect();
+    (docs, s.journal.len(), s.tool_id(), s.tool_options())
+}
+
+/// A file read apart from the session is placed only in the document Place started in: with
+/// another document active, Replace included when that document holds the same object under the
+/// same id, or after the document closed, nothing changes in any document; with the document
+/// active again, the file is placed in it.
+#[test]
+fn a_file_read_apart_from_the_session_is_placed_only_in_the_document_it_was_read_for() {
+    let blue = file("blue.png", &png(8, 8, [0, 0, 255, 255], None));
+    let not_active = "the document it was prepared for is no longer active";
+    for replace in [false, true] {
+        let p = with(blue.clone(), json!({"replace": replace}));
+        let mut s = session();
+        let square = json!({"x": 10, "y": 10, "width": 20, "height": 20});
+        let a = s.execute("shape.rectangle", &square).unwrap()["id"].clone();
+        let read = s.prepare_place(&p).unwrap().read().unwrap();
+        s.execute("file.new", &json!({"width": 400, "height": 300})).unwrap();
+        let b = s.execute("shape.rectangle", &square).unwrap()["id"].clone();
+        assert_eq!(a, b, "the other document holds an object with the same id");
+        assert!(node(&s, &b) == s.documents()[0].doc.node(NodeId(a.as_u64().unwrap())).unwrap().clone(), "and the same content");
+        let before = snapshot(&s);
+        let err = s.place_read(read).unwrap_err();
+        assert!(err.to_string().contains(not_active), "replace {replace}: {err}");
+        assert!(snapshot(&s) == before, "replace {replace}: nothing placed, selected or journaled in either document");
+        // Active again, the document Place started in takes the file.
+        let read = {
+            s.execute("document.activate", &json!({"index": 0})).unwrap();
+            s.prepare_place(&p).unwrap().read().unwrap()
+        };
+        s.execute("document.activate", &json!({"index": 1})).unwrap();
+        s.execute("document.activate", &json!({"index": 0})).unwrap();
+        let r = s.place_read(read).unwrap();
+        assert_eq!(s.active_index(), Some(0));
+        assert!(s.doc().unwrap().doc.node(NodeId(r["ids"][0].as_u64().unwrap())).is_some(), "replace {replace}: placed in the first document");
+        let others = s.documents()[1].doc.layers.last().unwrap().children().unwrap().len();
+        assert_eq!(others, 1, "replace {replace}: the other document keeps its one object");
+    }
+    // The document Place started in closed: refused in the document left open, and with none left.
+    let mut s = session();
+    let read = s.prepare_place(&blue).unwrap().read().unwrap();
+    s.execute("file.new", &json!({"width": 400, "height": 300})).unwrap();
+    s.execute("file.close", &json!({"index": 0})).unwrap();
+    let before = snapshot(&s);
+    assert!(s.place_read(read).unwrap_err().to_string().contains(not_active));
+    assert!(snapshot(&s) == before, "nothing placed in the document left open");
+    let read = s.prepare_place(&blue).unwrap().read().unwrap();
+    s.execute("file.close", &json!({})).unwrap();
+    let journal = s.journal.len();
+    assert!(s.place_read(read).is_err() && s.journal.len() == journal, "no document left: refused");
+}
+
+/// Files read for the place cursor apart from the session load it only in the document they were
+/// read for: with another document active, or after that document closed, its tool and queue stay
+/// as they were; with the document active again, the cursor is loaded.
+#[test]
+fn files_read_for_the_place_cursor_apart_from_the_session_load_it_only_in_their_document() {
+    let p = json!({"files": [file("a.png", &png(40, 20, [9, 9, 9, 255], None))], "link": false});
+    let not_active = "the document it was prepared for is no longer active";
+    let mut s = session();
+    let read = s.prepare_place_queue(&p).unwrap().read().unwrap();
+    s.execute("file.new", &json!({"width": 400, "height": 300})).unwrap();
+    let before = snapshot(&s);
+    assert!(s.place_queue_read(read).unwrap_err().to_string().contains(not_active));
+    assert!(snapshot(&s) == before && s.tool_id() == "selection", "the other document's tool and queue stay");
+    let read = {
+        s.execute("document.activate", &json!({"index": 0})).unwrap();
+        s.prepare_place_queue(&p).unwrap().read().unwrap()
+    };
+    s.execute("document.activate", &json!({"index": 1})).unwrap();
+    s.execute("document.activate", &json!({"index": 0})).unwrap();
+    assert_eq!(s.place_queue_read(read).unwrap()["count"], 1);
+    assert_eq!(s.tool_id(), "place");
+    // The document they were read for closed.
+    let mut s = session();
+    let read = s.prepare_place_queue(&p).unwrap().read().unwrap();
+    s.execute("file.new", &json!({"width": 400, "height": 300})).unwrap();
+    s.execute("file.close", &json!({"index": 0})).unwrap();
+    let before = snapshot(&s);
+    assert!(s.place_queue_read(read).unwrap_err().to_string().contains(not_active));
+    assert!(snapshot(&s) == before, "the document left open keeps its tool");
+}
+
 /// A linked image keeps the preview its file was read with ([`cmd::place::PlaceJob::read`] makes
 /// it), so placing the read file does not decode the image again; an embedded image has none.
 #[test]

crates/ui-egui/src/i18n/bg.tsv

@@ -4514,6 +4514,7 @@ axis	Both	И двете
 @msg	paths contain invalid coordinates	пътищата съдържат невалидни координати
 @msg	paths: give at least one file	пътища: посочете поне един файл
 @msg	replace: the object to replace was changed or deleted	замяна: обектът за замяна е променен или изтрит
+@msg	the document it was prepared for is no longer active	документът, за който е подготвено, вече не е активен
 @msg	pattern missing	липсва мостра
 @msg	patterns nested too deeply are filled with mid-grey	мострите, вложени прекалено дълбоко, се запълват със средно сиво
 @msg	percent must be above 0 and at most 6400, not {p}	percent трябва да е над 0 и най-много 6400, а не {p}

crates/ui-egui/src/i18n/bs.tsv

@@ -4909,6 +4909,7 @@ imageTrace	Outline	Obris
 @msg	paths contain invalid coordinates	putanje sadrže nevažeće koordinate
 @msg	paths: give at least one file	paths: navedite barem jednu datoteku
 @msg	replace: the object to replace was changed or deleted	replace: objekat za zamjenu je promijenjen ili izbrisan
+@msg	the document it was prepared for is no longer active	dokument za koji je pripremljeno više nije aktivan
 @msg	pattern missing	uzorak nedostaje
 @msg	patterns nested too deeply are filled with mid-grey	previše duboko ugniježđeni uzorci ispunjavaju se srednje sivom
 @msg	percent must be above 0 and at most 6400, not {p}	percent mora biti iznad 0 i najviše 6400, a ne {p}

crates/ui-egui/src/i18n/ca.tsv

@@ -5967,6 +5967,7 @@ digits	Malayalam	Malaiàlam
 @msg	Reload the page to go on (changes not saved yet may be lost).	Recarrega la pàgina per continuar (els canvis encara no desats es poden perdre).
 @msg	Replace Spine: select a blend and a path	Substitueix l’espina: selecciona una fusió i un traçat
 @msg	replace: the object to replace was changed or deleted	replace: l’objecte que s’havia de substituir s’ha canviat o suprimit
+@msg	the document it was prepared for is no longer active	el document per al qual es va preparar ja no està actiu
 @msg	Reset {_1}	Restableix {_1}
 @msg	resolutions must be between 1 and 2400 ppi	les resolucions han de ser entre 1 i 2400 ppi
 @msgplural	Restored {n} recovered document: save it to keep it|Restored {n} recovered documents: save them to keep them	S’ha restaurat {n} document recuperat: desa’l per conservar-lo|S’han restaurat {n} documents recuperats: desa’ls per conservar-los

crates/ui-egui/src/i18n/cs.tsv

@@ -5076,6 +5076,7 @@ imageTrace	Outline	Obrys
 @msg	paths contain invalid coordinates	cesty obsahují neplatné souřadnice
 @msg	paths: give at least one file	paths: zadejte alespoň jeden soubor
 @msg	replace: the object to replace was changed or deleted	replace: objekt k nahrazení byl změněn nebo odstraněn
+@msg	the document it was prepared for is no longer active	dokument, pro který bylo připraveno, už není aktivní
 @msg	pattern missing	chybí vzorek
 @msg	patterns nested too deeply are filled with mid-grey	příliš hluboko vnořené vzorky se vyplní středně šedou
 @msg	percent must be above 0 and at most 6400, not {p}	percent musí být větší než 0 a nejvýše 6400, ne {p}

crates/ui-egui/src/i18n/da.tsv

@@ -4614,6 +4614,7 @@ imageTrace	Outline	Kontur
 @msg	paths contain invalid coordinates	stierne indeholder ugyldige koordinater
 @msg	paths: give at least one file	stier: angiv mindst én fil
 @msg	replace: the object to replace was changed or deleted	erstat: objektet, der skulle erstattes, er ændret eller slettet
+@msg	the document it was prepared for is no longer active	dokumentet, det blev forberedt til, er ikke længere aktivt
 @msg	pattern missing	mønster mangler
 @msg	patterns nested too deeply are filled with mid-grey	mønstre, der er indlejret for dybt, udfyldes med mellemgrå
 @msg	percent must be above 0 and at most 6400, not {p}	percent skal være over 0 og højst 6400, ikke {p}

crates/ui-egui/src/i18n/de.tsv

@@ -4692,6 +4692,7 @@ theme	Appearance	Erscheinungsbild
 @msg	paths contain invalid coordinates	die Pfade enthalten ungültige Koordinaten
 @msg	paths: give at least one file	paths: Geben Sie mindestens eine Datei an
 @msg	replace: the object to replace was changed or deleted	replace: Das zu ersetzende Objekt wurde geändert oder gelöscht
+@msg	the document it was prepared for is no longer active	das Dokument, für das es vorbereitet wurde, ist nicht mehr aktiv
 @msg	pattern missing	das Muster fehlt
 @msg	patterns nested too deeply are filled with mid-grey	zu tief verschachtelte Muster werden mit mittlerem Grau gefüllt
 @msg	percent must be above 0 and at most 6400, not {p}	percent muss über 0 und höchstens 6400 sein, nicht {p}

crates/ui-egui/src/i18n/el.tsv

@@ -4722,6 +4722,7 @@ digits	Malayalam	Μαλαγιάλαμ
 @msg	paths contain invalid coordinates	οι διαδρομές περιέχουν μη έγκυρες συντεταγμένες
 @msg	paths: give at least one file	διαδρομές: δώστε τουλάχιστον ένα αρχείο
 @msg	replace: the object to replace was changed or deleted	αντικατάσταση: το αντικείμενο προς αντικατάσταση άλλαξε ή διαγράφηκε
+@msg	the document it was prepared for is no longer active	το έγγραφο για το οποίο προετοιμάστηκε δεν είναι πλέον ενεργό
 @msg	pattern missing	λείπει το μοτίβο
 @msg	patterns nested too deeply are filled with mid-grey	τα πολύ βαθιά ένθετα μοτίβα γεμίζονται με μέτριο γκρι
 @msg	percent must be above 0 and at most 6400, not {p}	το percent πρέπει να είναι μεγαλύτερο από 0 και έως 6400, όχι {p}

crates/ui-egui/src/i18n/es.tsv

@@ -4768,6 +4768,7 @@ axis	Both	Ambos
 @msg	paths contain invalid coordinates	los trazados contienen coordenadas no válidas
 @msg	paths: give at least one file	paths: indica al menos un archivo
 @msg	replace: the object to replace was changed or deleted	replace: se modificó o eliminó el objeto que se iba a reemplazar
+@msg	the document it was prepared for is no longer active	el documento para el que se preparó ya no está activo
 @msg	pattern missing	falta el motivo
 @msg	patterns nested too deeply are filled with mid-grey	los motivos anidados a demasiada profundidad se rellenan de gris medio
 @msg	percent must be above 0 and at most 6400, not {p}	percent debe ser mayor que 0 y como máximo 6400, no {p}

crates/ui-egui/src/i18n/fi.tsv

@@ -4982,6 +4982,7 @@ imageTrace	Outline	Ääriviiva
 @msg	paths contain invalid coordinates	polut sisältävät virheellisiä koordinaatteja
 @msg	paths: give at least one file	paths: anna vähintään yksi tiedosto
 @msg	replace: the object to replace was changed or deleted	replace: korvattavaa objektia on muutettu tai se on poistettu
+@msg	the document it was prepared for is no longer active	asiakirja, jota varten se valmisteltiin, ei ole enää aktiivinen
 @msg	pattern missing	kuvio puuttuu
 @msg	patterns nested too deeply are filled with mid-grey	liian syvälle sisäkkäiset kuviot täytetään keskiharmaalla
 @msg	percent must be above 0 and at most 6400, not {p}	percent-arvon on oltava yli 0 ja enintään 6400, ei {p}

crates/ui-egui/src/i18n/fr.tsv

@@ -4757,6 +4757,7 @@ axis	Both	Les deux
 @msg	paths contain invalid coordinates	les tracés contiennent des coordonnées non valides
 @msg	paths: give at least one file	paths : indiquez au moins un fichier
 @msg	replace: the object to replace was changed or deleted	replace : l’objet à remplacer a été modifié ou supprimé
+@msg	the document it was prepared for is no longer active	le document pour lequel il a été préparé n’est plus actif
 @msg	pattern missing	motif manquant
 @msg	patterns nested too deeply are filled with mid-grey	les motifs imbriqués trop profondément sont remplis de gris moyen
 @msg	percent must be above 0 and at most 6400, not {p}	percent doit être supérieur à 0 et au plus égal à 6400, pas {p}

crates/ui-egui/src/i18n/hi.tsv

@@ -7676,6 +7676,7 @@ antiAlias	Sharp	शार्प
 @msg	Replace Spine: select a blend and a path	Spine: एक मिश्रण और एक पाथ चुनें
 @msg	replace: select the one object to replace	प्रतिस्थापित करने के लिए एक ऑब्जेक्ट सिलेक्ट करें
 @msg	replace: the object to replace was changed or deleted	प्रतिस्थापित करने के लिए ऑब्जेक्ट को बदल दिया गया था या हटा दिया गया
+@msg	the document it was prepared for is no longer active	जिस डॉक्यूमेंट के लिए इसे तैयार किया गया था, वह अब सक्रिय नहीं है
 @msg	Reset {_1}	रीसेट करें {_1}
 @msg	resolution must be a number or screen|medium|high	resolution: रिज़ॉल्यूशन एक नंबर या स्क्रीन होना चाहिए
 @msg	resolution must be between 1 and 2400 ppi	resolution: रिज़ॉल्यूशन 1 और 2400 ppi के बीच होना चाहिए

crates/ui-egui/src/i18n/hu.tsv

@@ -5478,6 +5478,7 @@ imageTrace	Outline	Körvonal
 @msg	paths contain invalid coordinates	az útvonalakban érvénytelen koordináták vannak
 @msg	paths: give at least one file	paths: legalább egy fájlt adj meg
 @msg	replace: the object to replace was changed or deleted	replace: a cserélendő objektumot módosították vagy törölték
+@msg	the document it was prepared for is no longer active	az a dokumentum, amelyhez előkészítették, már nem aktív
 @msg	pattern missing	hiányzik a mintázat
 @msg	patterns nested too deeply are filled with mid-grey	a túl mélyen egymásba ágyazott mintázatok helyén középszürke kitöltés áll
 @msg	PDF settings are not an object	a PDF-beállítások nem objektumot alkotnak

crates/ui-egui/src/i18n/id.tsv

@@ -4614,6 +4614,7 @@ imageTrace	Outline	Kontur
 @msg	paths contain invalid coordinates	jalur berisi koordinat yang tidak valid
 @msg	paths: give at least one file	jalur: berikan setidaknya satu berkas
 @msg	replace: the object to replace was changed or deleted	ganti: objek yang akan diganti telah diubah atau dihapus
+@msg	the document it was prepared for is no longer active	dokumen yang menjadi tujuan persiapannya tidak lagi aktif
 @msg	pattern missing	pola hilang
 @msg	patterns nested too deeply are filled with mid-grey	pola yang bersarang terlalu dalam diisi dengan abu-abu tengah
 @msg	percent must be above 0 and at most 6400, not {p}	percent harus di atas 0 dan paling banyak 6400, bukan {p}

crates/ui-egui/src/i18n/it.tsv

@@ -4820,6 +4820,7 @@ axis	Both	Entrambi
 @msg	paths contain invalid coordinates	i tracciati contengono coordinate non valide
 @msg	paths: give at least one file	paths: specifica almeno un file
 @msg	replace: the object to replace was changed or deleted	replace: l’oggetto da sostituire è stato modificato o eliminato
+@msg	the document it was prepared for is no longer active	il documento per cui è stato preparato non è più attivo
 @msg	pattern missing	motivo mancante
 @msg	patterns nested too deeply are filled with mid-grey	i motivi annidati troppo in profondità vengono riempiti di grigio medio
 @msg	percent must be above 0 and at most 6400, not {p}	percent deve essere maggiore di 0 e al massimo 6400, non {p}

crates/ui-egui/src/i18n/ja.tsv

@@ -5183,6 +5183,7 @@ swatch	Bright Violet	ビビッドバイオレット
 @msg	`{file}` isn't a VectorCraft document, a PDF or a PDF-compatible .ai file	`{file}` は VectorCraft ドキュメント、PDF、PDF 互換の .ai ファイルのいずれでもありません
 @msg	paths: give at least one file	paths: ファイルを 1 つ以上指定してください
 @msg	replace: the object to replace was changed or deleted	replace: 置き換えるオブジェクトは変更または削除されています
+@msg	the document it was prepared for is no longer active	準備したときのドキュメントがもうアクティブではありません
 @msg	Couldn't place {name}: {e}	{name} を配置できませんでした: {e}
 @msg	no print service	プリントサービスがありません
 @msg	the print job has no data	プリントジョブにデータがありません

crates/ui-egui/src/i18n/ka.tsv

@@ -4443,6 +4443,7 @@ font-technology	Variable	ცვლადი
 @msg	paths contain invalid coordinates	ტრაექტორიებში არასწორი კოორდინატებია
 @msg	paths: give at least one file	paths: მიუთითეთ ერთი ფაილი მაინც
 @msg	replace: the object to replace was changed or deleted	replace: ჩასანაცვლებელი ობიექტი შეიცვალა ან წაიშალა
+@msg	the document it was prepared for is no longer active	დოკუმენტი, რომლისთვისაც მომზადდა, აღარ არის აქტიური
 @msg	pattern missing	პატერნი აკლია
 @msg	patterns nested too deeply are filled with mid-grey	ზედმეტად ღრმად ჩადგმული პატერნები საშუალო ნაცრისფრით ივსება
 @msg	percent must be above 0 and at most 6400, not {p}	percent უნდა იყოს 0-ზე მეტი და არაუმეტეს 6400-ისა და არა {p}

crates/ui-egui/src/i18n/ko.tsv

@@ -5110,6 +5110,7 @@ theme	Appearance	외관
 @msg	`{file}` isn't a VectorCraft document, a PDF or a PDF-compatible .ai file	`{file}`은(는) VectorCraft 문서, PDF 또는 PDF 호환 .ai 파일이 아닙니다
 @msg	paths: give at least one file	paths: 파일을 하나 이상 지정하세요
 @msg	replace: the object to replace was changed or deleted	replace: 바꿀 개체가 변경되었거나 삭제되었습니다
+@msg	the document it was prepared for is no longer active	준비한 문서가 더 이상 활성 상태가 아닙니다
 @msg	Couldn't place {name}: {e}	{name}을(를) 가져올 수 없습니다: {e}
 @msg	no print service	인쇄 서비스가 없습니다
 @msg	the print job has no data	인쇄 작업에 데이터가 없습니다

crates/ui-egui/src/i18n/nl.tsv

@@ -5128,6 +5128,7 @@ imageTrace	Outline	Contour
 @msg	paths contain invalid coordinates	paden bevatten ongeldige coördinaten
 @msg	paths: give at least one file	paden: geef minstens één bestand
 @msg	replace: the object to replace was changed or deleted	vervangen: het te vervangen object is gewijzigd of verwijderd
+@msg	the document it was prepared for is no longer active	het document waarvoor het is voorbereid, is niet langer actief
 @msg	pattern missing	patroon ontbreekt
 @msg	patterns nested too deeply are filled with mid-grey	patronen die te diep genest zijn, worden gevuld met middelgrijs
 @msg	percent must be above 0 and at most 6400, not {p}	percent moet boven 0 en maximaal 6400 zijn, niet {p}

crates/ui-egui/src/i18n/pl.tsv

@@ -4902,6 +4902,7 @@ imageTrace	Outline	Kontur
 @msg	paths contain invalid coordinates	ścieżki zawierają nieprawidłowe współrzędne
 @msg	paths: give at least one file	paths: podaj co najmniej jeden plik
 @msg	replace: the object to replace was changed or deleted	replace: obiekt do zastąpienia został zmieniony lub usunięty
+@msg	the document it was prepared for is no longer active	dokument, dla którego to przygotowano, nie jest już aktywny
 @msg	pattern missing	brak wzorka
 @msg	patterns nested too deeply are filled with mid-grey	zbyt głęboko zagnieżdżone wzorki są wypełniane średnią szarością
 @msg	percent must be above 0 and at most 6400, not {p}	percent musi być większy od 0 i nie większy niż 6400, nie {p}

crates/ui-egui/src/i18n/pt-br.tsv

@@ -4224,6 +4224,7 @@ axis	Both	Ambos
 @msg	paths contain invalid coordinates	os traçados contêm coordenadas inválidas
 @msg	paths: give at least one file	paths: informe pelo menos um arquivo
 @msg	replace: the object to replace was changed or deleted	replace: o objeto a ser substituído foi alterado ou excluído
+@msg	the document it was prepared for is no longer active	o documento para o qual foi preparado não está mais ativo
 @msg	pattern missing	padrão ausente
 @msg	patterns nested too deeply are filled with mid-grey	padrões aninhados com profundidade excessiva são preenchidos com cinza médio
 @msg	percent must be above 0 and at most 6400, not {p}	percent deve ser maior que 0 e no máximo 6400, não {p}

crates/ui-egui/src/i18n/ru.tsv

@@ -4805,6 +4805,7 @@ axis	Both	Оба
 @msg	paths contain invalid coordinates	контуры содержат недопустимые координаты
 @msg	paths: give at least one file	paths: укажите как минимум один файл
 @msg	replace: the object to replace was changed or deleted	replace: заменяемый объект был изменён или удалён
+@msg	the document it was prepared for is no longer active	документ, для которого это было подготовлено, больше не активен
 @msg	pattern missing	узор отсутствует
 @msg	patterns nested too deeply are filled with mid-grey	слишком глубоко вложенные узоры заполняются серым
 @msg	percent must be above 0 and at most 6400, not {p}	percent должен быть больше 0 и не более 6400, а не {p}

crates/ui-egui/src/i18n/sv.tsv

@@ -4669,6 +4669,7 @@ axis	Both	Båda
 @msg	paths contain invalid coordinates	banorna innehåller ogiltiga koordinater
 @msg	paths: give at least one file	paths: ange minst en fil
 @msg	replace: the object to replace was changed or deleted	replace: objektet som skulle ersättas har ändrats eller tagits bort
+@msg	the document it was prepared for is no longer active	dokumentet som det förbereddes för är inte längre aktivt
 @msg	pattern missing	mönster saknas
 @msg	patterns nested too deeply are filled with mid-grey	mönster som är kapslade för djupt fylls med mellangrått
 @msg	percent must be above 0 and at most 6400, not {p}	percent måste vara över 0 och högst 6400, inte {p}

crates/ui-egui/src/i18n/tr.tsv

@@ -4522,6 +4522,7 @@ axis	Both	Her İkisi
 @msg	paths contain invalid coordinates	yollar geçersiz koordinatlar içeriyor
 @msg	paths: give at least one file	yollar: en az bir dosya verin
 @msg	replace: the object to replace was changed or deleted	değiştir: değiştirilecek nesne değiştirildi veya silindi
+@msg	the document it was prepared for is no longer active	hazırlandığı belge artık etkin değil
 @msg	pattern missing	desen eksik
 @msg	patterns nested too deeply are filled with mid-grey	çok derin iç içe geçmiş desenler orta gri renkle dolu
 @msg	percent must be above 0 and at most 6400, not {p}	percent 0'ın üzerinde ve en fazla 6400 olmalıdır, {p} değil

crates/ui-egui/src/i18n/uk.tsv

@@ -4804,6 +4804,7 @@ axis	Both	Обидві
 @msg	paths contain invalid coordinates	контури містять неприпустимі координати
 @msg	paths: give at least one file	paths: вкажіть щонайменше один файл
 @msg	replace: the object to replace was changed or deleted	replace: об’єкт для заміни було змінено або видалено
+@msg	the document it was prepared for is no longer active	документ, для якого це було підготовлено, більше не активний
 @msg	pattern missing	візерунок відсутній
 @msg	patterns nested too deeply are filled with mid-grey	надто глибоко вкладені візерунки заповнюються сірим
 @msg	percent must be above 0 and at most 6400, not {p}	percent має бути більше 0 і не більше 6400, а не {p}

crates/ui-egui/src/i18n/vi.tsv

@@ -5142,6 +5142,7 @@ theme	Appearance	Giao diện
 @msg	paths contain invalid coordinates	đường dẫn chứa tọa độ không hợp lệ
 @msg	paths: give at least one file	đường dẫn: hãy cung cấp ít nhất một tệp
 @msg	replace: the object to replace was changed or deleted	thay thế: đối tượng cần thay thế đã bị thay đổi hoặc xóa
+@msg	the document it was prepared for is no longer active	tài liệu được chuẩn bị không còn hoạt động
 @msg	pattern missing	thiếu họa tiết
 @msg	patterns nested too deeply are filled with mid-grey	họa tiết lồng nhau quá sâu được tô bằng màu xám trung tính
 @msg	PDF settings are not an object	Cài đặt PDF không phải là đối tượng

crates/ui-egui/src/i18n/zh-hans.tsv

@@ -4866,6 +4866,7 @@ imageTrace	Outline	轮廓
 @msg	`{file}` isn't a VectorCraft document, a PDF or a PDF-compatible .ai file	`{file}` 不是 VectorCraft 文档、PDF 或 PDF 兼容的 .ai 文件
 @msg	paths: give at least one file	paths：请至少给出一个文件
 @msg	replace: the object to replace was changed or deleted	replace：要替换的对象已被更改或删除
+@msg	the document it was prepared for is no longer active	为其准备的文档已不再处于活动状态
 @msg	Couldn't place {name}: {e}	无法置入 {name}：{e}
 @msg	no print service	没有打印服务
 @msg	the print job has no data	打印作业没有数据

crates/ui-egui/src/i18n/zh-hant.tsv

@@ -2615,6 +2615,7 @@ file-filter	Templates	範本
 @msg	`{file}` isn't a VectorCraft document, a PDF or a PDF-compatible .ai file	`{file}` 不是 VectorCraft 文件、PDF 或 PDF 相容的 .ai 檔案
 @msg	paths: give at least one file	paths：請提供至少一個檔案
 @msg	replace: the object to replace was changed or deleted	replace：要取代的物件已被變更或刪除
+@msg	the document it was prepared for is no longer active	為其準備的文件已不再處於使用中
 @msg	Couldn't place {name}: {e}	無法置入 {name}：{e}
 @msg	no print service	沒有列印服務
 @msg	the print job has no data	列印工作沒有資料

docs/target-app-parity.md

@@ -1672,6 +1672,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
   - File › Place reads Word 97-2003 `.doc` documents as area type with the same formatting, read from the main text's pieces, the style sheet's paragraph and character styles and direct formatting. Table rows are paragraphs with their cells separated by tabs and fields place as their results; fields without a result, hidden and deleted text, pictures, headers, footers, notes, comments and text boxes are left out, and `warnings` names each kind left out or changed. Encrypted documents, documents last saved with fast save and Word 6.0 and Word 95 documents are refused (`file.place`, `crates/engine/src/tests/textimport.rs`).
   - Placing a Word 97-2003 `.doc` document works out each style's formatting once and each property run's once, and refuses property pages that are out of order, listed twice or overlap, a style sheet that holds fewer styles than it counts, styles based on each other in a loop, and more than 100,000 runs of character or of paragraph properties, 16 MiB of properties or 100,000 paragraphs, hidden ones included (`file.place`, `crates/engine/src/tests/textimport.rs`).
   - On the desktop, File › Place reads and decodes files off the UI thread, one at a time, and places each once it is read, with "Placing" in the status bar and the busy spinner until then: the Place dialog's OK, a file dropped on the canvas, a click or drag of the place cursor, and the OK of the PDF, DXF and text import options. The files and thumbnails the place cursor is loaded with are read the same way, and the Place dialog's lines about its files are read on a thread of their own. Files are placed in the order they were started; a file is not placed while a dialog is open or a drag is under way, and a file whose document was closed meanwhile is not placed. `file.place` and `file.place.queue` over MCP and scripts reply as before.
+  - A file read for `file.place`, or files read for the place cursor, apart from the session (`Session::place_read`, `Session::place_queue_read`) go only into the document they were read for: while another document is active, or once that document is closed, they are refused with "the document it was prepared for is no longer active" and no document, selection, tool or undo step changes (`crates/engine/src/tests/place.rs`).
   - On the desktop, Paste from a menu or shortcut captures another app's bitmap or reads a copied image file on the UI thread, then decodes the image on the file-reading worker. The status bar shows "Pasting" until the image is pasted. Windows device-independent bitmaps and Linux clipboard images are encoded as PNG on that worker. A Copy or Cut made while the image is read keeps its internal clipboard. `edit.paste*` over MCP and scripts reads the bitmap at once.
   - The pixels of a PNG, JPEG, GIF or WebP file that Place decodes to check them are kept in the image store the renderers share, so the canvas's first frame with the placed image draws them without decoding the file again on the UI thread: File › Place, a file dropped on the canvas, a click or drag of the place cursor, `file.place`, and Paste of such an image. A CMYK JPEG is still decoded when it is first drawn (`crates/ui-egui/src/placing.rs`, `crates/render/src/tests.rs`).
   - A photo whose EXIF orientation turns or flips it (a camera held upright or upside down) is placed and opened upright, as it was taken; the image is stored as it is seen (#4284). A quarter turn swaps the resolution's axes, so the image keeps its physical size. TIFFs read without the image decoder (grayscale with extra channels, CCITT Group 3, CMYK with one plane per ink) follow their Orientation tag too, and a turned CMYK JPEG or TIFF keeps its inks, at the 8 or 16 bits the file has, as a CMYK TIFF.