Shapes: the Curvature Circle tool shows "Corner" at a corner anchor

At a corner anchor the tool now shows "Corner" instead of "Cusp", and
`shape.curvatureCircle` returns "the path has a corner there, so it has
no single curvature".

- A closed subpath whose only segment with length loops back to its
  start (a teardrop) has a corner at its tip, from both ends of the loop.
- An anchor marked smooth whose out handle points back along its in
  handle is a corner.
- The guide error and the new corner error have rows in the 24 catalogs
  that translate every message.
- A test covers a Smart Guides snapping tolerance larger than 5 screen
  points, with Smart Guides off and on.
This commit is contained in:
dotCooCoo
2026-11-17 21:34:11 -08:00
parent de29baab11
commit a64ceebccf
32 changed files with 125 additions and 37 deletions
+1 -1
View File
@@ -137,7 +137,7 @@ Ranked; detail in [docs/roadmap.md](docs/roadmap.md) and [docs/gaps.md](docs/gap
- 2026-11-14: Packaging Tools add-on (Object › Plug-ins › Packaging Tools): fold line roles for dielines (Cut, Crease, Partial Cut, Perforation), each carried by the swatch on a path's top stroke through a per-document role table that native files keep; PDF prints a role line on its swatch's separation when that swatch is a spot color, as the default role swatches are, and SVG, DXF and HP-GL keep the stroke's color. Make Cut Line, Make Crease Line, Make Partial Cut Line and Make Perforation Line give the selected paths a role, overprinting by default, and make a missing role swatch; the Fold Lines panel counts each role in the selection or the document, and its Role Swatches… picks another swatch for a role (`addon.packaging.setRole`, `addon.packaging.roles`, `addon.packaging.setRoleSwatch`). A VectorCraft addition: headline numbers unchanged.
- 2026-11-16: Check Fold Lines in the Packaging Tools add-on (Object › Plug-ins › Packaging Tools, and the Fold Lines panel's Check button): the fold lines of the selection or the document are split into blanks, panels and hinges (cut lines bound the material, and creases, partial cuts and perforations divide it into panels), and 15 kinds of issue are listed, errors and warnings, each naming its lines: cut lines that enclose nothing or end loose, gaps closed within a tolerance, a cut on top of a crease, duplicate lines, creases that end inside a panel, divide nothing, lie outside the blank or are not straight, gaps too narrow to map, fold lines in a hole, panels joined by no crease, and fold lines on a non-printing layer. The panel lists the issues in the interface language; clicking one selects its lines (`addon.packaging.check`). A VectorCraft addition: headline numbers unchanged.
- 2026-11-02: Mouse wheel over a closed font-family field in Character, Properties or Control changes selected text through the family list using saved font filters (excluding search text), one undo step per notch, stopping at the ends (#5253). Scores and estimates unchanged.
- 2026-11-17: Curvature Circle tool (after the Circle tool in its group): a click on a path draws the circle that touches it there and bends as it bends, on the side it bends toward, or with Shift on the other side; a segment that is the usual cubic of a circular arc of 90° or less gives the arc's own radius, so a click on a circle draws that circle; the tool shows the circle, its center and its radius (with an asterisk for an arc's radius) until the click, or "Straight segment", "Cusp" or "Circle too large" where it draws none (`shape.curvatureCircle`). One undo step per circle. A VectorCraft addition: headline numbers unchanged.
- 2026-11-17: Curvature Circle tool (after the Circle tool in its group): a click on a path draws the circle that touches it there and bends as it bends, on the side it bends toward, or with Shift on the other side; a segment that is the usual cubic of a circular arc of 90° or less gives the arc's own radius, so a click on a circle draws that circle; the tool shows the circle, its center and its radius (with an asterisk for an arc's radius) until the click, or "Straight segment", "Cusp", "Corner" or "Circle too large" where it draws none (`shape.curvatureCircle`). One undo step per circle. A VectorCraft addition: headline numbers unchanged.
- 2026-11-15: Circle through three points: three Shift-clicks with the Ellipse tool, or `shape.circleThroughPoints` with three points or three selected anchor points, draw the circle whose edge passes through them, with the current paint, in one undo step; after two points the tool previews the circle through the pointer, and two points that are the same or three on one line are refused with a message. Scores and estimates unchanged.
- 2026-11-17: Circle tool (after the Ellipse tool in its group): two clicks or a drag draw the circle on that diameter, and a click followed by a drag from a second point to a third draws the circle through the three; Shift keeps the diameter at 45° steps, Alt rounds a two-point circle's diameter to the rulers' ticks at the current zoom, points snap to Smart Guides, and the tool shows the circle, its center, its radii and its diameter until the release, or "Circle too large" for points on one line or a circle past the canvas. `shape.circleThroughPoints` also takes two points or two selected anchor points as the ends of a diameter. One undo step per circle. A VectorCraft addition: headline numbers unchanged.
- 2026-10-31: Pattern libraries: Window › Swatch Libraries › Patterns and the Swatches panel's library menu open Geometric Patterns, a built-in library of eleven pattern swatches (dots, stripes, checks, a grid and shapes); clicking one adds its pattern and swatch to the document, once, and applies it to the active fill or stroke (`swatch.library.add`).
+2 -1
View File
@@ -73,7 +73,7 @@ pub fn specs() -> Vec<CommandSpec> {
"Curvature Circle",
[],
None,
"{id, subpath?=0, segment, t: 0..1, convex?=false} → {id, cx, cy, radius, nominal}: a circle with the current paint that touches path `id` at `t` on the segment and bends as the path bends there (its circle of curvature), on the side the path bends toward, or on the other side with convex; a segment that is the usual cubic of a circular arc of 90° or less gives a circle of that arc's own radius (nominal: true), on the concave side the arc's own circle; not pixel-aligned even while Align New Objects to Pixel Grid is on; a straight stretch, a cusp, a corner anchor (t 0 or 1 where two segments meet at an angle of more than half a degree and the anchor is not marked smooth; segments of no length between them are passed over), a guide, or a circle reaching past the canvas is an error, and nothing is drawn",
"{id, subpath?=0, segment, t: 0..1, convex?=false} → {id, cx, cy, radius, nominal}: a circle with the current paint that touches path `id` at `t` on the segment and bends as the path bends there (its circle of curvature), on the side the path bends toward, or on the other side with convex; a segment that is the usual cubic of a circular arc of 90° or less gives a circle of that arc's own radius (nominal: true), on the concave side the arc's own circle; not pixel-aligned even while Align New Objects to Pixel Grid is on; a straight stretch, a cusp, a corner anchor (t 0 or 1 where two segments meet at an angle of more than half a degree and the anchor is not marked smooth, or where they turn back the way they came; segments of no length between them are passed over), a guide, or a circle reaching past the canvas is an error, and nothing is drawn",
has_doc,
curvature_circle
),
@@ -515,6 +515,7 @@ fn curvature_circle(s: &mut Session, p: &Value) -> Result<Value> {
let circle = found.map_err(|e| match e {
NoCircle::Straight => bad(C, "the path is straight there, so no circle matches its curvature"),
NoCircle::Cusp => bad(C, "the path has a cusp there, so it has no single curvature"),
NoCircle::Corner => bad(C, "the path has a corner there, so it has no single curvature"),
})?;
let (center, radius) = (circle.center, circle.radius);
let r = Rect::new(center.x - radius, center.y - radius, center.x + radius, center.y + radius);
+1 -1
View File
@@ -106,7 +106,7 @@ fn straight_segments_cusps_and_huge_circles_are_refused() {
for (id, t, want) in [
(line, 0.5, "the path is straight there, so no circle matches its curvature"),
(cusp, 0.5, "the path has a cusp there, so it has no single curvature"),
(corner, 1.0, "the path has a cusp there, so it has no single curvature"),
(corner, 1.0, "the path has a corner there, so it has no single curvature"),
(gentle, 0.5, "the circle that matches the path there would reach past the canvas"),
] {
let e = s.execute(C, &json!({"id": id.0, "segment": 0, "t": t})).unwrap_err().to_string();
+45 -18
View File
@@ -14,6 +14,8 @@ pub enum NoCircle {
/// The curve has no single direction there: a cusp, a handle drawn back onto its anchor, or a
/// segment with no length.
Cusp,
/// Two segments meet at an anchor at an angle: the path has no single direction there.
Corner,
}
/// The circle that touches a curve at one point and bends as the curve does there.
@@ -76,16 +78,19 @@ pub fn curvature_circle(c: CubicBez, t: f64, convex: bool) -> Result<CurvatureCi
/// [`curvature_circle`] at `t` on segment `seg` of `sp`. At an end of the segment where it meets
/// the next or previous segment at a corner, the path has no single direction: that is a
/// [`NoCircle::Cusp`], and so is a segment `sp` lacks. Segments with no length between the two are
/// passed over. The anchor is smooth when it is marked smooth, or when the two segments leave it
/// within [`SMOOTH_TURN`] of one direction.
/// [`NoCircle::Corner`]. A segment `sp` lacks is a [`NoCircle::Cusp`]. Segments with no length
/// between the two are passed over, and a closed subpath with one segment of length meets itself.
/// The anchor is smooth when it is marked smooth with handles that do not point back, or when the
/// two segments leave it within [`SMOOTH_TURN`] of one direction.
pub fn curvature_circle_on(sp: &SubPath, seg: usize, t: f64, convex: bool) -> Result<CurvatureCircle, NoCircle> {
let n = sp.segment_count();
if seg >= n {
return Err(NoCircle::Cusp);
}
let c = sp.segment(seg);
let corner = if t == 0.0 {
let corner = if start_direction(c) == Vec2::ZERO {
false
} else if t == 0.0 {
neighbor(sp, seg, false).is_some_and(|(prev, skipped)| !smooth(sp, seg, skipped, end_direction(prev), start_direction(c)))
} else if t == 1.0 {
neighbor(sp, seg, true).is_some_and(|(next, skipped)| !smooth(sp, (seg + 1) % n, skipped, end_direction(c), start_direction(next)))
@@ -93,16 +98,17 @@ pub fn curvature_circle_on(sp: &SubPath, seg: usize, t: f64, convex: bool) -> Re
false
};
if corner {
return Err(NoCircle::Cusp);
return Err(NoCircle::Corner);
}
curvature_circle(c, t, convex)
}
/// The nearest segment with length before (or with `forward`, after) segment `seg`, and whether
/// segments with no length lay between; `None` at an open end of the subpath.
/// segments with no length lay between; `None` at an open end of the subpath. In a closed subpath
/// whose only segment with length is `seg`, that is `seg` itself.
fn neighbor(sp: &SubPath, seg: usize, forward: bool) -> Option<(CubicBez, bool)> {
let n = sp.segment_count();
for k in 1..n {
for k in 1..=n {
let i = if forward { (seg + k < n || sp.closed).then(|| (seg + k) % n)? } else { (seg >= k || sp.closed).then(|| (seg + n - k) % n)? };
let s = sp.segment(i);
if start_direction(s) != Vec2::ZERO {
@@ -113,11 +119,13 @@ fn neighbor(sp: &SubPath, seg: usize, forward: bool) -> Option<(CubicBez, bool)>
}
/// Is the join at anchor `anchor` smooth: marked smooth (with no segment of no length passed
/// over), or the directions `a` into it and `b` out of it the same within [`SMOOTH_TURN`]?
/// over) with the directions `a` into it and `b` out of it not pointing back, or `a` and `b` the
/// same within [`SMOOTH_TURN`]?
fn smooth(sp: &SubPath, anchor: usize, skipped: bool, a: Vec2, b: Vec2) -> bool {
let marked = !skipped && sp.anchors.get(anchor).is_some_and(|an| an.kind == AnchorKind::Smooth && an.has_in() && an.has_out());
let (la, lb) = (a.hypot(), b.hypot());
marked || (la > 0.0 && lb > 0.0 && a.dot(b) > 0.0 && a.cross(b).abs() <= SMOOTH_TURN.sin() * la * lb)
let ahead = la > 0.0 && lb > 0.0 && a.dot(b) > 0.0;
ahead && (marked || a.cross(b).abs() <= SMOOTH_TURN.sin() * la * lb)
}
/// The direction a segment leaves its first anchor in: toward its first control point that is
@@ -284,8 +292,8 @@ mod tests {
fn a_corner_anchor_has_no_circle() {
let bp = kurbo::BezPath::from_svg("M0 0 C50 -50 100 -50 150 0 L300 0").unwrap();
let sp = &crate::PathData::from_bezpath(&bp).subpaths[0];
assert_eq!(curvature_circle_on(sp, 0, 1.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(sp, 1, 0.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(sp, 0, 1.0, false), Err(NoCircle::Corner));
assert_eq!(curvature_circle_on(sp, 1, 0.0, false), Err(NoCircle::Corner));
assert_eq!(curvature_circle_on(sp, 1, 0.5, false), Err(NoCircle::Straight));
assert!(curvature_circle_on(sp, 0, 0.0, false).is_ok() && curvature_circle_on(sp, 0, 0.5, false).is_ok());
assert_eq!(curvature_circle_on(sp, 2, 0.5, false), Err(NoCircle::Cusp));
@@ -299,7 +307,20 @@ mod tests {
let bp = kurbo::BezPath::from_svg("M0 0 C10 -10 90 -10 100 0 C110 10 60 90 50 100 C40 90 -10 30 0 0 Z").unwrap();
let tri = &crate::PathData::from_bezpath(&bp).subpaths[0];
assert!(tri.closed);
assert_eq!(curvature_circle_on(tri, 0, 0.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(tri, 0, 0.0, false), Err(NoCircle::Corner));
}
/// A closed subpath whose only segment with length loops back to its start meets itself at its
/// point: a teardrop's tip is a corner, from both ends of the loop.
#[test]
fn a_loop_that_meets_itself_at_an_angle_has_no_circle_there() {
let a = Point::new(0.0, 0.0);
let tip = |out: Point, back: Point| SubPath::new(vec![Anchor::with_handles(a, a, out), Anchor::with_handles(a, back, a)], true);
let drop = tip(Point::new(100.0, -100.0), Point::new(100.0, 100.0));
assert_eq!(drop.segment_count(), 2);
assert_eq!(curvature_circle_on(&drop, 0, 0.0, false), Err(NoCircle::Corner));
assert_eq!(curvature_circle_on(&drop, 0, 1.0, false), Err(NoCircle::Corner));
assert!(curvature_circle_on(&drop, 0, 0.5, false).is_ok());
}
/// A segment with no length between a curve and a line, or a closed subpath whose last anchor
@@ -309,8 +330,8 @@ mod tests {
let (a, b, c) = (Point::new(0.0, 0.0), Point::new(150.0, 0.0), Point::new(300.0, 0.0));
let curve_in = Anchor::with_handles(b, Point::new(100.0, -50.0), b);
let open = SubPath::new(vec![Anchor::with_handles(a, a, Point::new(50.0, -50.0)), curve_in, Anchor::corner(b), Anchor::corner(c)], false);
assert_eq!(curvature_circle_on(&open, 0, 1.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(&open, 2, 0.0, false), Err(NoCircle::Cusp), "from the line's side too");
assert_eq!(curvature_circle_on(&open, 0, 1.0, false), Err(NoCircle::Corner));
assert_eq!(curvature_circle_on(&open, 2, 0.0, false), Err(NoCircle::Corner), "from the line's side too");
assert_eq!(curvature_circle_on(&open, 2, 0.5, false), Err(NoCircle::Straight));
// A closed triangle of curves drawn back to its first anchor before it closes.
let tri = SubPath::new(
@@ -323,12 +344,13 @@ mod tests {
true,
);
assert_eq!(tri.segment_count(), 4);
assert_eq!(curvature_circle_on(&tri, 0, 0.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(&tri, 2, 1.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(&tri, 0, 0.0, false), Err(NoCircle::Corner));
assert_eq!(curvature_circle_on(&tri, 2, 1.0, false), Err(NoCircle::Corner));
}
/// An anchor whose handles turn by a thousandth of a radian, as rounded coordinates leave them,
/// is smooth; one marked smooth is smooth whatever its handles; a turn of 2° is a corner.
/// is smooth; one marked smooth is smooth unless its handles point back the way they came; a
/// turn of 2° is a corner.
#[test]
fn a_nearly_smooth_or_marked_smooth_anchor_has_a_circle() {
let mid = |out_x: f64, kind: AnchorKind| {
@@ -341,8 +363,13 @@ mod tests {
let rounded = mid(100.05, AnchorKind::Corner);
assert!(curvature_circle_on(&rounded, 0, 1.0, false).is_ok() && curvature_circle_on(&rounded, 1, 0.0, false).is_ok());
let turned = 50.0 * 2f64.to_radians().tan();
assert_eq!(curvature_circle_on(&mid(100.0 - turned, AnchorKind::Corner), 0, 1.0, false), Err(NoCircle::Cusp));
assert_eq!(curvature_circle_on(&mid(100.0 - turned, AnchorKind::Corner), 0, 1.0, false), Err(NoCircle::Corner));
assert!(curvature_circle_on(&mid(100.0 - turned, AnchorKind::Smooth), 0, 1.0, false).is_ok());
// Marked smooth, with the out handle pointing back along the in handle.
let mut back = mid(100.0, AnchorKind::Smooth);
back.anchors.get_mut(1).unwrap().h_out = Point::new(100.0, -40.0);
assert_eq!(curvature_circle_on(&back, 0, 1.0, false), Err(NoCircle::Corner));
assert_eq!(curvature_circle_on(&back, 1, 0.0, false), Err(NoCircle::Corner));
}
/// An arc's cubic is taken only up to a quarter turn, with both ends on one circle and handles
+7 -6
View File
@@ -7,10 +7,11 @@
//! cross, a line from the center to the point it touches and, with Measurement Labels on, its
//! radius by the pointer, with an asterisk when the segment is the usual cubic of a circular arc
//! of 90° or less and the circle has the arc's own radius. A click draws it, in one undo step, and a
//! press dragged 2 screen points or more, or canceled with Escape, draws nothing. The circle goes on the side the path bends
//! toward; with Shift held at the press, on the other side. On a straight stretch, at a cusp or a
//! corner, or where the circle would reach past the canvas, the pointer shows "Straight segment",
//! "Cusp" or "Circle too large" instead, and a click draws nothing.
//! press dragged 2 screen points or more, or canceled with Escape, draws nothing. The circle goes on
//! the side the path bends toward; with Shift held at the press, on the other side. On a straight
//! stretch, at a cusp, at a corner, or where the circle would reach past the canvas, the pointer
//! shows "Straight segment", "Cusp", "Corner" or "Circle too large" instead, and a click draws
//! nothing.
use serde_json::json;
use vectorcraft_doc::{MAX_COORD, NodeId};
@@ -90,6 +91,7 @@ fn found(cx: &ToolContext, hit: Hit, convex: bool) -> Option<Found> {
Ok(_) => Found::Refused("Circle too large", at),
Err(NoCircle::Straight) => Found::Refused("Straight segment", at),
Err(NoCircle::Cusp) => Found::Refused("Cusp", at),
Err(NoCircle::Corner) => Found::Refused("Corner", at),
})
}
@@ -192,8 +194,7 @@ impl Tool for CurvatureCircleTool {
Some(Found::Circle(c)) => {
let r = c.radius;
let path = shapes::ellipse(Rect::new(c.center.x - r, c.center.y - r, c.center.x + r, c.center.y + r)).to_bezpath();
// The canvas draws a dashed outline dash by dash along its whole length: a circle
// longer than DASHED_PX on screen is drawn solid instead.
// Drawn solid when longer than DASHED_PX on screen.
let dashed = std::f64::consts::TAU * r <= cx.tol(DASHED_PX);
o.push(Overlay::Path { path, color, width: 1.0, dashed });
o.push(Overlay::Line { a: c.center, b: c.at, color, dashed: false });
+14 -4
View File
@@ -97,19 +97,23 @@ fn shift_puts_the_circle_on_the_other_side() {
assert_eq!(params(&click(&mut t, &cx, (300.0, 200.0), shift))["convex"], json!(true));
}
/// On a straight segment the pointer shows "Straight segment", at a cusp "Cusp", and where the
/// circle would reach past the canvas "Circle too large"; a click there draws nothing.
/// On a straight segment the pointer shows "Straight segment", at a cusp "Cusp", at a corner
/// anchor "Corner", and where the circle would reach past the canvas "Circle too large"; a click
/// there draws nothing.
#[test]
fn straight_segments_cusps_and_huge_circles_are_refused() {
let line = PathData::from_bezpath(&vectorcraft_geom::BezPath::from_svg("M0 400 L400 400").unwrap());
// A handle drawn back onto its anchor at (0, 0).
let cusp = PathData::from_bezpath(&vectorcraft_geom::BezPath::from_svg("M0 0 C0 0 60 40 100 0").unwrap());
let gentle = PathData::from_bezpath(&vectorcraft_geom::BezPath::from_svg("M0 450 C100 450.0000001 200 450.0000001 300 450").unwrap());
let d = doc_with(&[line, cusp, gentle]);
// A curve that meets a line at a corner anchor (150, 250).
let corner = PathData::from_bezpath(&vectorcraft_geom::BezPath::from_svg("M0 250 C50 200 100 200 150 250 L300 250").unwrap());
let d = doc_with(&[line, cusp, gentle, corner]);
let (s, p) = (Selection::default(), paint());
let cx = ToolContext { smart_guides: false, ..cx(&d, &s, &p) };
let mut t = CurvatureCircleTool::default();
for (at, want) in [((200.0, 401.0), "Straight segment"), ((-1.0, -1.0), "Cusp"), ((150.0, 451.0), "Circle too large")] {
let refused = [((200.0, 401.0), "Straight segment"), ((-1.0, -1.0), "Cusp"), ((150.0, 251.0), "Corner"), ((150.0, 451.0), "Circle too large")];
for (at, want) in refused {
t.pointer(&cx, &ev(PointerKind::Move, at, Mods::default()));
let o = t.overlays(&cx);
assert_eq!(label(&o).as_deref(), Some(want), "{o:?}");
@@ -133,6 +137,12 @@ fn the_pointer_reaches_a_path_within_5_screen_points() {
let zoomed = ToolContext { zoom: 2.0, ..cx };
assert_eq!(click(&mut t, &zoomed, (303.0, 200.0), Mods::default()), vec![]);
assert_eq!(click(&mut t, &zoomed, (302.0, 200.0), Mods::default()).len(), 1);
// A larger snapping tolerance reaches farther, with Smart Guides off or on.
for smart_guides in [false, true] {
let wide = ToolContext { snapping_tolerance: 10.0, smart_guides, ..cx };
assert_eq!(click(&mut t, &wide, (309.0, 200.0), Mods::default()).len(), 1, "{smart_guides}");
assert_eq!(click(&mut t, &wide, (311.0, 200.0), Mods::default()), vec![], "{smart_guides}");
}
}
/// Of two paths within reach, the nearer one is used, even when the other one is selected: a
+1 -1
View File
@@ -374,7 +374,7 @@ pub(crate) fn candidate_paths(cx: &ToolContext) -> Vec<NodeId> {
}
});
rest.reverse();
// A set keeps this linear: hover runs it on every pointer move, over every path.
// Skips ids already listed.
let mut seen: std::collections::HashSet<NodeId> = v.iter().copied().collect();
for id in rest {
if seen.insert(id) {
+2
View File
@@ -6158,6 +6158,8 @@ liquify-list-end {0}, {1} {0} i {1}
@msg direct-select two or three anchor points, or give `points` seleccioneu directament dos o tres punts d’ancoratge o indiqueu `points`
@msg the path is straight there, so no circle matches its curvature el traçat és recte en aquest punt, així que cap cercle no coincideix amb la seva curvatura
@msg the path has a cusp there, so it has no single curvature el traçat té una punta en aquest punt, així que no té una curvatura única
@msg the path has a corner there, so it has no single curvature el traçat té un vèrtex en aquest punt, així que no té una curvatura única
@msg a guide has no curvature circle una guia no té cercle de curvatura
@msg the circle that matches the path there would reach past the canvas el cercle que coincideix amb el traçat en aquest punt sortiria del llenç
@msg no circle passes through these points: two are the same or all three lie on one line cap cercle no passa per aquests punts: dos són iguals o tots tres són en una mateixa recta
@msg no app to open files here aquí no hi ha cap aplicació per obrir fitxers
Can't render this file because it contains an unexpected character in line 2 and column 73.
+2
View File
@@ -5323,6 +5323,8 @@ liquify-list-end {0}, {1} {0} a {1}
@msg direct-select two or three anchor points, or give `points` vyberte přímým výběrem dva nebo tři kotevní body, nebo zadejte `points`
@msg the path is straight there, so no circle matches its curvature cesta je v tomto místě rovná, takže jejímu zakřivení neodpovídá žádná kružnice
@msg the path has a cusp there, so it has no single curvature cesta má v tomto místě hrot, takže nemá jediné zakřivení
@msg the path has a corner there, so it has no single curvature cesta má v tomto místě roh, takže nemá jediné zakřivení
@msg a guide has no curvature circle vodítko nemá kružnici křivosti
@msg the circle that matches the path there would reach past the canvas kružnice odpovídající cestě v tomto místě by přesáhla plátno
@msg no circle passes through these points: two are the same or all three lie on one line těmito body neprochází žádná kružnice: dva jsou stejné nebo všechny tři leží na jedné přímce
@msg no app to open files here zde chybí aplikace pro otevírání souborů
Can't render this file because it is too large.
+2
View File
@@ -7512,6 +7512,8 @@ imageTrace Outline Kontur
@msg direct-select two or three anchor points, or give `points` direkte markér to eller tre ankerpunkter, eller angiv `points`
@msg the path is straight there, so no circle matches its curvature kurven er lige der, så ingen cirkel passer til dens krumning
@msg the path has a cusp there, so it has no single curvature kurven har en spids der, så den har ingen entydig krumning
@msg the path has a corner there, so it has no single curvature kurven har et hjørne der, så den har ingen entydig krumning
@msg a guide has no curvature circle en hjælpelinje har ingen krumningscirkel
@msg the circle that matches the path there would reach past the canvas cirklen, der passer til kurven der, ville gå ud over lærredet
@msg no circle passes through these points: two are the same or all three lie on one line ingen cirkel går gennem disse punkter: to er ens, eller alle tre ligger på én linje
@msg no app to open files here ingen app til at åbne filer her
Can't render this file because it is too large.
+2
View File
@@ -4924,6 +4924,8 @@ liquify-list-end {0}, {1} {0} und {1}
@msg direct-select two or three anchor points, or give `points` wählen Sie zwei oder drei Ankerpunkte direkt aus oder geben Sie `points` an
@msg the path is straight there, so no circle matches its curvature der Pfad ist dort gerade, daher passt kein Kreis zu seiner Krümmung
@msg the path has a cusp there, so it has no single curvature der Pfad hat dort eine Spitze und daher keine eindeutige Krümmung
@msg the path has a corner there, so it has no single curvature der Pfad hat dort eine Ecke und daher keine eindeutige Krümmung
@msg a guide has no curvature circle eine Hilfslinie hat keinen Krümmungskreis
@msg the circle that matches the path there would reach past the canvas der Kreis, der dort zum Pfad passt, würde über die Arbeitsfläche hinausreichen
@msg no circle passes through these points: two are the same or all three lie on one line durch diese Punkte verläuft kein Kreis: zwei sind gleich oder alle drei liegen auf einer Linie
@msg no app to open files here hier gibt es keine App zum Öffnen von Dateien
Can't render this file because it is too large.
+2
View File
@@ -4982,6 +4982,8 @@ digits Malayalam Μαλαγιάλαμ
@msg direct-select two or three anchor points, or give `points` επιλέξτε άμεσα δύο ή τρία σημεία αγκύρωσης ή δώστε `points`
@msg the path is straight there, so no circle matches its curvature η διαδρομή είναι ευθεία εκεί, οπότε κανένας κύκλος δεν ταιριάζει με την καμπυλότητά της
@msg the path has a cusp there, so it has no single curvature η διαδρομή έχει ακίδα εκεί, οπότε δεν έχει μία μόνο καμπυλότητα
@msg the path has a corner there, so it has no single curvature η διαδρομή έχει γωνία εκεί, οπότε δεν έχει μία μόνο καμπυλότητα
@msg a guide has no curvature circle ένας οδηγός δεν έχει κύκλο καμπυλότητας
@msg the circle that matches the path there would reach past the canvas ο κύκλος που ταιριάζει με τη διαδρομή εκεί θα υπερέβαινε τον καμβά
@msg no circle passes through these points: two are the same or all three lie on one line κανένας κύκλος δεν περνά από αυτά τα σημεία: δύο είναι ίδια ή και τα τρία βρίσκονται σε μία ευθεία
@msg no app to open files here δεν υπάρχει εφαρμογή για άνοιγμα αρχείων εδώ
Can't render this file because it is too large.
+2
View File
@@ -5028,6 +5028,8 @@ liquify-list-end {0}, {1} {0}, {1}
@msg direct-select two or three anchor points, or give `points` seleccione directamente dos o tres puntos de ancla o indique `points`
@msg the path is straight there, so no circle matches its curvature el trazado es recto en ese punto, así que ningún círculo coincide con su curvatura
@msg the path has a cusp there, so it has no single curvature el trazado tiene una cúspide en ese punto, así que no tiene una curvatura única
@msg the path has a corner there, so it has no single curvature el trazado tiene un vértice en ese punto, así que no tiene una curvatura única
@msg a guide has no curvature circle una guía no tiene círculo de curvatura
@msg the circle that matches the path there would reach past the canvas el círculo que coincide con el trazado en ese punto excedería el lienzo
@msg no circle passes through these points: two are the same or all three lie on one line ningún círculo pasa por estos puntos: dos son iguales o los tres están en una misma línea
@msg no app to open files here aquí no hay ninguna aplicación para abrir archivos
Can't render this file because it contains an unexpected character in line 2 and column 73.
+2
View File
@@ -5252,6 +5252,8 @@ liquify-list-end {0}, {1} {0} ja {1}
@msg direct-select two or three anchor points, or give `points` valitse suoraan kaksi tai kolme ankkuripistettä tai anna `points`
@msg the path is straight there, so no circle matches its curvature polku on siinä kohdassa suora, joten mikään ympyrä ei vastaa sen kaarevuutta
@msg the path has a cusp there, so it has no single curvature polulla on siinä kohdassa kärki, joten sillä ei ole yksiselitteistä kaarevuutta
@msg the path has a corner there, so it has no single curvature polulla on siinä kohdassa kulma, joten sillä ei ole yksiselitteistä kaarevuutta
@msg a guide has no curvature circle apuviivalla ei ole kaarevuusympyrää
@msg the circle that matches the path there would reach past the canvas ympyrä, joka vastaa polkua siinä kohdassa, ylittäisi kankaan
@msg no circle passes through these points: two are the same or all three lie on one line näiden pisteiden kautta ei kulje ympyrää: kaksi pisteistä on samoja tai kaikki kolme ovat samalla suoralla
@msg no app to open files here täällä ei ole sovellusta tiedostojen avaamiseen
Can't render this file because it contains an unexpected character in line 2 and column 73.
+2
View File
@@ -4990,6 +4990,8 @@ liquify-list-end {0}, {1} {0} et {1}
@msg direct-select two or three anchor points, or give `points` sélectionnez deux ou trois points d’ancrage avec l’outil Sélection directe, ou indiquez `points`
@msg the path is straight there, so no circle matches its curvature le tracé est droit à cet endroit, donc aucun cercle ne correspond à sa courbure
@msg the path has a cusp there, so it has no single curvature le tracé a un point de rebroussement à cet endroit, donc il n’a pas de courbure unique
@msg the path has a corner there, so it has no single curvature le tracé forme un angle à cet endroit, donc il n’a pas de courbure unique
@msg a guide has no curvature circle un repère n’a pas de cercle de courbure
@msg the circle that matches the path there would reach past the canvas le cercle qui correspond au tracé à cet endroit dépasserait la zone de travail
@msg no circle passes through these points: two are the same or all three lie on one line aucun cercle ne passe par ces points : deux sont identiques ou les trois sont alignés
@msg no app to open files here aucune application pour ouvrir des fichiers ici
Can't render this file because it is too large.
+2
View File
@@ -7640,6 +7640,8 @@ liquify-list-end {0}, {1} {0} और {1}
@msg direct-select two or three anchor points, or give `points` दो या तीन एंकर पॉइंट्स डायरेक्ट-सिलेक्ट करें, या `points` दें
@msg the path is straight there, so no circle matches its curvature वहाँ पाथ सीधा है, इसलिए कोई वृत्त उसकी वक्रता से मेल नहीं खाता
@msg the path has a cusp there, so it has no single curvature वहाँ पाथ में नुकीला बिंदु है, इसलिए उसकी कोई एक वक्रता नहीं है
@msg the path has a corner there, so it has no single curvature वहाँ पाथ में कोना है, इसलिए उसकी कोई एक वक्रता नहीं है
@msg a guide has no curvature circle गाइड का कोई वक्रता वृत्त नहीं होता
@msg the circle that matches the path there would reach past the canvas वहाँ पाथ से मेल खाने वाला वृत्त कैनवास से बाहर चला जाएगा
@msg no circle passes through these points: two are the same or all three lie on one line इन पॉइंट्स से होकर कोई वृत्त नहीं गुज़रता: दो एक जैसे हैं या तीनों एक ही रेखा पर हैं
@msg no app to open files here यहां फ़ाइलों को ओपन करने के लिए कोई ऐप नहीं है
Can't render this file because it is too large.
+2
View File
@@ -5691,6 +5691,8 @@ liquify-list-end {0}, {1} {0} és {1}
@msg direct-select two or three anchor points, or give `points` jelölj ki közvetlen kijelöléssel két vagy három horgonypontot, vagy add meg a `points` értéket
@msg the path is straight there, so no circle matches its curvature az útvonal ott egyenes, így egyetlen kör sem illeszkedik a görbületéhez
@msg the path has a cusp there, so it has no single curvature az útvonalnak ott csúcspontja van, így nincs egyértelmű görbülete
@msg the path has a corner there, so it has no single curvature az útvonalnak ott sarka van, így nincs egyértelmű görbülete
@msg a guide has no curvature circle a segédvonalnak nincs görbületi köre
@msg the circle that matches the path there would reach past the canvas az útvonalhoz ott illeszkedő kör túlnyúlna a vásznon
@msg no circle passes through these points: two are the same or all three lie on one line ezeken a pontokon nem halad át kör: kettő egybeesik, vagy mindhárom egy egyenesen van
@msg no app to open files here itt nincs fájlmegnyitó alkalmazás
Can't render this file because it is too large.
+2
View File
@@ -5058,6 +5058,8 @@ liquify-list-end {0}, {1} {0} e {1}
@msg direct-select two or three anchor points, or give `points` seleziona con Selezione diretta due o tre punti di ancoraggio oppure indica `points`
@msg the path is straight there, so no circle matches its curvature il tracciato è diritto in quel punto, quindi nessun cerchio corrisponde alla sua curvatura
@msg the path has a cusp there, so it has no single curvature il tracciato ha una cuspide in quel punto, quindi non ha un'unica curvatura
@msg the path has a corner there, so it has no single curvature il tracciato ha un angolo in quel punto, quindi non ha un'unica curvatura
@msg a guide has no curvature circle una guida non ha un cerchio di curvatura
@msg the circle that matches the path there would reach past the canvas il cerchio che corrisponde al tracciato in quel punto supererebbe l'area di lavoro
@msg no circle passes through these points: two are the same or all three lie on one line nessun cerchio passa per questi punti: due coincidono oppure tutti e tre sono allineati
@msg no app to open files here nessuna app per aprire file qui
Can't render this file because it is too large.
+2
View File
@@ -4852,6 +4852,8 @@ swatch Bright Violet ビビッドバイオレット
@msg direct-select two or three anchor points, or give `points` アンカーポイントを 2 つまたは 3 つダイレクト選択するか、`points` を指定してください
@msg the path is straight there, so no circle matches its curvature パスはその位置で直線のため、曲率に合う円はありません
@msg the path has a cusp there, so it has no single curvature パスはその位置に尖点があるため、曲率が 1 つに定まりません
@msg the path has a corner there, so it has no single curvature パスはその位置にコーナーがあるため、曲率が 1 つに定まりません
@msg a guide has no curvature circle ガイドには曲率円がありません
@msg the circle that matches the path there would reach past the canvas その位置でパスに合う円はキャンバスからはみ出します
@msg no circle passes through these points: two are the same or all three lie on one line これらの点を通る円はありません: 2 つの点が同じか、3 点すべてが一直線上にあります
@msg select at least two objects オブジェクトを 2 つ以上選択してください
Can't render this file because it is too large.
+2
View File
@@ -6837,6 +6837,8 @@ font-technology Variable ცვლადი
@msg direct-select two or three anchor points, or give `points` პირდაპირი მონიშვნით მონიშნეთ ორი ან სამი საყრდენი წერტილი ან მიუთითეთ `points`
@msg the path is straight there, so no circle matches its curvature ტრაექტორია იქ სწორია, ამიტომ არცერთი წრეწირი არ შეესაბამება მის სიმრუდეს
@msg the path has a cusp there, so it has no single curvature ტრაექტორიას იქ წვეტი აქვს, ამიტომ მას ერთი სიმრუდე არ აქვს
@msg the path has a corner there, so it has no single curvature ტრაექტორიას იქ კუთხე აქვს, ამიტომ მას ერთი სიმრუდე არ აქვს
@msg a guide has no curvature circle დამხმარე ხაზს სიმრუდის წრე არ აქვს
@msg the circle that matches the path there would reach past the canvas წრეწირი, რომელიც იქ ტრაექტორიას შეესაბამება, ტილოს გასცდებოდა
@msg no circle passes through these points: two are the same or all three lie on one line ამ წერტილებზე წრეწირი არ გადის: ორი ერთნაირია ან სამივე ერთ წრფეზე მდებარეობს
@msg no app to open files here აქ ფაილების გასახსნელი აპი არ არის
Can't render this file because it is too large.
+2
View File
@@ -4779,6 +4779,8 @@ theme Appearance 외관
@msg direct-select two or three anchor points, or give `points` 앵커 포인트 두 개 또는 세 개를 직접 선택하거나 `points`를 지정하세요
@msg the path is straight there, so no circle matches its curvature 패스가 그 위치에서 직선이므로 곡률에 맞는 원이 없습니다
@msg the path has a cusp there, so it has no single curvature 패스가 그 위치에서 뾰족하므로 곡률이 하나로 정해지지 않습니다
@msg the path has a corner there, so it has no single curvature 패스가 그 위치에서 모서리를 이루므로 곡률이 하나로 정해지지 않습니다
@msg a guide has no curvature circle 안내선에는 곡률원이 없습니다
@msg the circle that matches the path there would reach past the canvas 그 위치에서 패스에 맞는 원이 캔버스를 벗어납니다
@msg no circle passes through these points: two are the same or all three lie on one line 이 점들을 지나는 원이 없습니다: 두 점이 같거나 세 점이 모두 한 직선 위에 있습니다
@msg select at least two objects 개체를 두 개 이상 선택하세요
Can't render this file because it is too large.
+2
View File
@@ -5385,6 +5385,8 @@ imageTrace Outline Contour
@msg direct-select two or three anchor points, or give `points` selecteer met directe selectie twee of drie ankerpunten of geef `points` op
@msg the path is straight there, so no circle matches its curvature het pad is daar recht, dus geen cirkel komt overeen met de kromming ervan
@msg the path has a cusp there, so it has no single curvature het pad heeft daar een keerpunt en dus geen eenduidige kromming
@msg the path has a corner there, so it has no single curvature het pad heeft daar een hoek en dus geen eenduidige kromming
@msg a guide has no curvature circle een hulplijn heeft geen krommingscirkel
@msg the circle that matches the path there would reach past the canvas de cirkel die daar bij het pad past, zou voorbij het canvas reiken
@msg no circle passes through these points: two are the same or all three lie on one line er gaat geen cirkel door deze punten: twee zijn gelijk of alle drie liggen op één lijn
@msg no app to open files here hier is geen app om bestanden mee te openen
Can't render this file because it is too large.
+2
View File
@@ -5146,6 +5146,8 @@ liquify-list-end {0}, {1} {0} i {1}
@msg direct-select two or three anchor points, or give `points` zaznacz bezpośrednio dwa lub trzy punkty kontrolne lub podaj `points`
@msg the path is straight there, so no circle matches its curvature ścieżka jest w tym miejscu prosta, więc żaden okrąg nie pasuje do jej krzywizny
@msg the path has a cusp there, so it has no single curvature ścieżka ma w tym miejscu ostrze, więc nie ma jednej krzywizny
@msg the path has a corner there, so it has no single curvature ścieżka ma w tym miejscu narożnik, więc nie ma jednej krzywizny
@msg a guide has no curvature circle linia pomocnicza nie ma okręgu krzywizny
@msg the circle that matches the path there would reach past the canvas okrąg pasujący w tym miejscu do ścieżki wykroczyłby poza płótno
@msg no circle passes through these points: two are the same or all three lie on one line przez te punkty nie przechodzi żaden okrąg: dwa są takie same albo wszystkie trzy leżą na jednej prostej
@msg no app to open files here brak aplikacji do otwierania plików
Can't render this file because it is too large.
+2
View File
@@ -4332,6 +4332,8 @@ axis Both Ambos
@msg direct-select two or three anchor points, or give `points` selecione diretamente dois ou três pontos de ancoragem ou informe `points`
@msg the path is straight there, so no circle matches its curvature o caminho é reto nesse ponto, então nenhum círculo corresponde à sua curvatura
@msg the path has a cusp there, so it has no single curvature o caminho tem uma cúspide nesse ponto, então não tem uma curvatura única
@msg the path has a corner there, so it has no single curvature o caminho tem um canto nesse ponto, então não tem uma curvatura única
@msg a guide has no curvature circle uma guia não tem círculo de curvatura
@msg the circle that matches the path there would reach past the canvas o círculo que corresponde ao caminho nesse ponto ultrapassaria a tela
@msg no circle passes through these points: two are the same or all three lie on one line nenhum círculo passa por esses pontos: dois são iguais ou os três estão na mesma reta
@msg no app to open files here nenhum aplicativo para abrir arquivos aqui
Can't render this file because it is too large.
+2
View File
@@ -5052,6 +5052,8 @@ liquify-list-end {0}, {1} {0} и {1}
@msg direct-select two or three anchor points, or give `points` выделите прямым выделением две или три опорные точки или задайте `points`
@msg the path is straight there, so no circle matches its curvature контур в этом месте прямой, поэтому его кривизне не соответствует ни одна окружность
@msg the path has a cusp there, so it has no single curvature у контура в этом месте точка возврата, поэтому у него нет единой кривизны
@msg the path has a corner there, so it has no single curvature у контура в этом месте угол, поэтому у него нет единой кривизны
@msg a guide has no curvature circle у направляющей нет круга кривизны
@msg the circle that matches the path there would reach past the canvas окружность, соответствующая контуру в этом месте, вышла бы за пределы холста
@msg no circle passes through these points: two are the same or all three lie on one line через эти точки не проходит ни одна окружность: две точки совпадают или все три лежат на одной прямой
@msg no app to open files here здесь нет приложения для открытия файлов
Can't render this file because it is too large.
+2
View File
@@ -4925,6 +4925,8 @@ liquify-list-end {0}, {1} {0} och {1}
@msg direct-select two or three anchor points, or give `points` direktmarkera två eller tre ankarpunkter eller ange `points`
@msg the path is straight there, so no circle matches its curvature banan är rak där, så ingen cirkel matchar dess krökning
@msg the path has a cusp there, so it has no single curvature banan har en spets där, så den har ingen entydig krökning
@msg the path has a corner there, so it has no single curvature banan har ett hörn där, så den har ingen entydig krökning
@msg a guide has no curvature circle en stödlinje har ingen krökningscirkel
@msg the circle that matches the path there would reach past the canvas cirkeln som matchar banan där skulle nå utanför arbetsytan
@msg no circle passes through these points: two are the same or all three lie on one line ingen cirkel går genom de här punkterna: två är samma punkt eller så ligger alla tre på en linje
@msg no app to open files here det finns ingen app för att öppna filer här
Can't render this file because it is too large.
+2
View File
@@ -4745,6 +4745,8 @@ liquify-list-end {0}, {1} {0} ve {1}
@msg direct-select two or three anchor points, or give `points` iki veya üç bağlantı noktasını doğrudan seçin veya `points` verin
@msg the path is straight there, so no circle matches its curvature yol orada düz, bu yüzden hiçbir çember eğriliğiyle eşleşmiyor
@msg the path has a cusp there, so it has no single curvature yolun orada sivri bir noktası var, bu yüzden tek bir eğriliği yok
@msg the path has a corner there, so it has no single curvature yolun orada bir köşesi var, bu yüzden tek bir eğriliği yok
@msg a guide has no curvature circle bir kılavuzun eğrilik çemberi yoktur
@msg the circle that matches the path there would reach past the canvas yolla orada eşleşen çember tuvalin dışına taşardı
@msg no circle passes through these points: two are the same or all three lie on one line bu noktalardan geçen bir çember yok: ikisi aynı ya da üçü de aynı doğru üzerinde
@msg no app to open files here burada dosyaları açacak uygulama yok
Can't render this file because it is too large.
+2
View File
@@ -5042,6 +5042,8 @@ liquify-list-end {0}, {1} {0} і {1}
@msg direct-select two or three anchor points, or give `points` виділіть дві або три опорні точки прямим виділенням або задайте `points`
@msg the path is straight there, so no circle matches its curvature контур у цьому місці прямий, тож його кривині не відповідає жодне коло
@msg the path has a cusp there, so it has no single curvature контур у цьому місці має точку звороту, тож не має єдиної кривини
@msg the path has a corner there, so it has no single curvature контур у цьому місці має кут, тож не має єдиної кривини
@msg a guide has no curvature circle напрямна не має кола кривини
@msg the circle that matches the path there would reach past the canvas коло, що відповідає контуру в цьому місці, вийшло б за межі полотна
@msg no circle passes through these points: two are the same or all three lie on one line через ці точки не проходить жодне коло: дві точки збігаються або всі три лежать на одній прямій
@msg no app to open files here тут немає програми для відкриття файлів
Can't render this file because it is too large.
+2
View File
@@ -5374,6 +5374,8 @@ liquify-list-end {0}, {1} {0} và {1}
@msg direct-select two or three anchor points, or give `points` hãy chọn trực tiếp hai hoặc ba điểm neo hoặc cung cấp `points`
@msg the path is straight there, so no circle matches its curvature đường dẫn thẳng tại đó, nên không có đường tròn nào khớp với độ cong của nó
@msg the path has a cusp there, so it has no single curvature đường dẫn có điểm lùi tại đó, nên không có một độ cong duy nhất
@msg the path has a corner there, so it has no single curvature đường dẫn có góc tại đó, nên không có một độ cong duy nhất
@msg a guide has no curvature circle đường căn không có đường tròn độ cong
@msg the circle that matches the path there would reach past the canvas đường tròn khớp với đường dẫn tại đó sẽ vượt quá giới hạn vùng vẽ
@msg no circle passes through these points: two are the same or all three lie on one line không có đường tròn nào đi qua các điểm này: hai điểm trùng nhau hoặc cả ba điểm thẳng hàng
@msg no app to open files here không có ứng dụng để mở tệp ở đây
Can't render this file because it contains an unexpected character in line 205 and column 5.
+2
View File
@@ -4550,6 +4550,8 @@ imageTrace Outline 轮廓
@msg direct-select two or three anchor points, or give `points` 请直接选择两个或三个锚点,或提供 `points`
@msg the path is straight there, so no circle matches its curvature 路径在该处是直的,因此没有圆与其曲率相符
@msg the path has a cusp there, so it has no single curvature 路径在该处有尖点,因此没有唯一的曲率
@msg the path has a corner there, so it has no single curvature 路径在该处有尖角,因此没有唯一的曲率
@msg a guide has no curvature circle 参考线没有曲率圆
@msg the circle that matches the path there would reach past the canvas 在该处与路径曲率相符的圆会超出画布
@msg no circle passes through these points: two are the same or all three lie on one line 没有圆经过这些点:有两点相同,或三点共线
@msg select at least two objects 请至少选择两个对象
Can't render this file because it is too large.
+2
View File
@@ -2083,6 +2083,8 @@ file-filter Templates 範本
@msg direct-select two or three anchor points, or give `points` 請以直接選取方式選取兩個或三個錨點,或提供 `points`
@msg the path is straight there, so no circle matches its curvature 路徑在該處是直的,因此沒有圓與其曲率相符
@msg the path has a cusp there, so it has no single curvature 路徑在該處有尖點,因此沒有唯一的曲率
@msg the path has a corner there, so it has no single curvature 路徑在該處有角點,因此沒有唯一的曲率
@msg a guide has no curvature circle 參考線沒有曲率圓
@msg the circle that matches the path there would reach past the canvas 在該處與路徑曲率相符的圓會超出畫布
@msg no circle passes through these points: two are the same or all three lie on one line 沒有圓通過這些點:有兩點相同,或三點共線
@msg select at least two objects 請選取至少兩個物件
Can't render this file because it is too large.
+6 -5
View File
@@ -6226,9 +6226,9 @@ result is `{id, cx, cy, radius, nominal}`, where `nominal` is true for such an a
The circle is not pixel-aligned, even while [Align New Objects to Pixel Grid](#align-new-objects-to-pixel-grid) is on.
The command returns an error and draws nothing on a straight segment or the turning point of an S curve, at a cusp,
at an anchor whose handle is drawn back onto it, at a corner anchor (`t` 0 or 1 where two segments meet at an angle
of more than half a degree and the anchor is not marked smooth; segments of no length between them are passed over),
when the circle would reach past the canvas (4,000,000 pt from the origin), when `t` is not from 0 to 1, when `id` is
a guide, and when the path, subpath or segment does not exist.
of more than half a degree and the anchor is not marked smooth, or where they turn back the way they came; segments
of no length between them are passed over), when the circle would reach past the canvas (4,000,000 pt from the
origin), when `t` is not from 0 to 1, when `id` is a guide, and when the path, subpath or segment does not exist.
The Curvature Circle tool, after the Circle tool in the Ellipse tool's toolbar group, draws with this command. The
pointer snaps to the nearest path that is not a guide within 5 screen points, or within Smart Guides › Snapping
@@ -6236,8 +6236,9 @@ Tolerance when that is larger, and the tool shows the circle that matches the pa
once it is more than 50,000 screen points around), a small cross at its center, a line from the center to the point
it touches and, with Measurement Labels on, its radius by the pointer, followed by an asterisk for an arc's own
radius. A click draws the circle, and a press dragged 2 screen points or more, or canceled with Escape, draws nothing;
Shift held at the press puts the circle on the other side of the path. On a straight segment, at a cusp or a corner, or where the circle would
reach past the canvas, the pointer shows "Straight segment", "Cusp" or "Circle too large", and a click draws nothing.
Shift held at the press puts the circle on the other side of the path. On a straight segment, at a cusp, at a corner
anchor, or where the circle would reach past the canvas, the pointer shows "Straight segment", "Cusp", "Corner" or
"Circle too large", and a click draws nothing.
```json
{"name":"run_command","arguments":{"command":"shape.curvatureCircle","params":{"id":12,"segment":0,"t":0.5}}}