Merge pull request #7989 from dotCooCoo/feat/prefs-setting-descriptions

Preferences: a line under the fields describes the setting under the pointer
This commit is contained in:
BFlat
2026-11-16 08:11:20 +07:00
committed by GitHub
31 changed files with 522 additions and 6 deletions
+6
View File
@@ -2955,6 +2955,12 @@ digits Malayalam Малаялам
Responsive Адаптивен
Restore Възстановяване
Restore every preference to its default (applied on OK) Възстановяване на всички настройки по подразбиране (прилага се при ОПК)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Единицата за новите документи от вградените размери, освен тези в пиксели, и за отворените файлове без записана единица; ако я изберете тук и натиснете ОК, тя става и единица на активния документ.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Дебелините на щрихите, тиретата и междините се показват в тази единица и въведените за тях числа се четат в нея.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Размерите на текста, междуредието и отстъпът на базовата линия се показват в тази единица и въведените за тях числа се четат в нея.
The unit for East Asian type measurements, which no field uses yet. Единицата за мерките на източноазиатски текст, която засега не се използва от нито едно поле.
When on, a number typed without a unit into a field in picas is read in points. Когато е включено, число, въведено без единица в поле в пики, се чете в точки.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. При XML ID имената на обектите се показват като XML ID в Слоеве, Променливи и Опции за слоя.
Reset all preferences to their defaults? Да се нулират ли всички настройки до стойностите по подразбиране?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Стойностите по подразбиране се прилагат, когато щракнете върху ОК в Настройки. Отказ там запазва текущите ви настройки.
Restore Recovered Documents Възстановяване на възстановените документи
Can't render this file because it is too large.
+6
View File
@@ -4378,6 +4378,12 @@ font-technology Variable Varijabilni
Preferences Postavke
Previous Prethodno
Restore every preference to its default (applied on OK) Vrati svaku postavku na zadanu vrijednost (primjenjuje se na U redu)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Jedinica za nove dokumente ugrađenih veličina, osim onih u pikselima, i za otvorene datoteke bez zapisane jedinice; ako je odaberete ovdje i kliknete U redu, postaje i jedinica aktivnog dokumenta.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Debljine poteza, crtice i razmaci prikazuju se u ovoj jedinici, a brojevi uneseni za njih čitaju se u njoj.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Veličine teksta, prored i pomak osnovne linije prikazuju se u ovoj jedinici, a brojevi uneseni za njih čitaju se u njoj.
The unit for East Asian type measurements, which no field uses yet. Jedinica za mjere istočnoazijskog teksta, koju još nijedno polje ne koristi.
When on, a number typed without a unit into a field in picas is read in points. Kad je uključeno, broj unesen bez jedinice u polje u picama čita se u tačkama.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Uz XML ID nazivi objekata prikazuju se kao XML ID u Slojevima, Varijablama i Opcijama sloja.
Reset all preferences to their defaults? Vratiti sve postavke na zadane vrijednosti?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Zadane vrijednosti primjenjuju se kada kliknete U redu u Postavkama. Otkaži tamo zadržava vaše trenutne postavke.
Smaller ↔ Larger Manje ↔ veće
Can't render this file because it contains an unexpected character in line 2 and column 73.
+6
View File
@@ -3783,6 +3783,12 @@ digits Malayalam Malaiàlam
Responsive Adaptatiu
Restore Restaura
Restore every preference to its default (applied on OK) Restaura cada preferència al seu valor predeterminat (s’aplica en prémer D’acord)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. La unitat dels documents nous de mides predefinides, excepte les mides en píxels, i dels fitxers oberts que no registren cap unitat; si la trieu aquí i feu clic a D’acord, també passa a ser la unitat del document actiu.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Els gruixos de traç, els guions i els espais es mostren en aquesta unitat, i els nombres que s’hi escriuen es llegeixen en aquesta unitat.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Les mides del text, l’interlineat i el desplaçament de la línia de base es mostren en aquesta unitat, i els nombres que s’hi escriuen es llegeixen en aquesta unitat.
The unit for East Asian type measurements, which no field uses yet. La unitat per a les mesures del text d’Àsia oriental, que encara no fa servir cap camp.
When on, a number typed without a unit into a field in picas is read in points. Quan està activat, un nombre escrit sense unitat en un camp en piques es llegeix en punts.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Amb ID XML, els noms dels objectes es mostren com a ID XML a Capes, Variables i Opcions de la capa.
Reset all preferences to their defaults? Voleu restablir totes les preferències als valors predeterminats?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Els valors predeterminats s’apliquen quan feu clic a D’acord a Preferències. Cancel·la allà conserva les preferències actuals.
Restore Recovered Documents Restaura els documents recuperats
Can't render this file because it contains an unexpected character in line 2 and column 73.
+6
View File
@@ -4483,6 +4483,12 @@ font-technology Variable Variabilní
Preferences Předvolby
Previous Předchozí
Restore every preference to its default (applied on OK) Obnovit všechny předvolby na výchozí hodnoty (použije se po OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Jednotka nových dokumentů z vestavěných velikostí kromě velikostí v obrazových bodech a otevřených souborů bez uložené jednotky; když ji zde zvolíte a kliknete na OK, nastaví se i jako jednotka aktivního dokumentu.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Tloušťky tahů, čárky a mezery se zobrazují v této jednotce a čísla pro ně zadaná se v ní čtou.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Velikosti písma, proklad a posun účaří se zobrazují v této jednotce a čísla pro ně zadaná se v ní čtou.
The unit for East Asian type measurements, which no field uses yet. Jednotka pro míry východoasijského písma, kterou zatím žádné pole nepoužívá.
When on, a number typed without a unit into a field in picas is read in points. Když je zapnuto, číslo zadané bez jednotky do pole v pica se čte v bodech.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. S volbou XML ID se názvy objektů zobrazují jako XML ID ve Vrstvách, Proměnných a Možnostech vrstvy.
Reset all preferences to their defaults? Obnovit všechny předvolby na výchozí hodnoty?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Výchozí hodnoty se použijí po klepnutí na OK v Předvolbách. Zrušit tam zachová vaše současné předvolby.
Smaller ↔ Larger Menší ↔ Větší
Can't render this file because it is too large.
+6
View File
@@ -4828,6 +4828,12 @@ font-technology Variable Variable
Preferences Præferencer
Previous Forrige
Restore every preference to its default (applied on OK) Gendan alle præferencer til standard (anvendes ved OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Enheden for nye dokumenter i de indbyggede størrelser, bortset fra størrelser i pixels, og for åbnede filer, der ikke angiver en enhed; vælger du den her og klikker på OK, får det aktive dokument også denne enhed.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Stregtykkelser, streger og mellemrum vises i denne enhed, og tal, der skrives til dem, læses i den.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Tekststørrelser, linjeafstand og grundlinjeforskydning vises i denne enhed, og tal, der skrives til dem, læses i den.
The unit for East Asian type measurements, which no field uses yet. Enheden for mål i østasiatisk tekst, som intet felt bruger endnu.
When on, a number typed without a unit into a field in picas is read in points. Når den er slået til, læses et tal, der skrives uden enhed i et felt i pica, i punkter.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Med XML-id vises objektnavne som XML-id'er i Lag, Variabler og Lagindstillinger.
Reset all preferences to their defaults? Nulstil alle præferencer til standard?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Standardværdierne anvendes, når du klikker på OK i Præferencer. Annullér der beholder dine nuværende præferencer.
Smaller ↔ Larger Mindre ↔ Større
Can't render this file because it contains an unexpected character in line 2 and column 73.
+6
View File
@@ -3005,6 +3005,12 @@ digits Malayalam Malayalam
Responsive Responsiv
Restore Wiederherstellen
Restore every preference to its default (applied on OK) Alle Voreinstellungen auf ihre Standardwerte zurücksetzen (wird bei OK angewendet)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Die Einheit für neue Dokumente in den integrierten Größen außer Pixelgrößen und für geöffnete Dateien ohne gespeicherte Einheit; wenn Sie sie hier wählen und auf OK klicken, erhält auch das aktive Dokument diese Einheit.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Konturstärken, Striche und Lücken werden in dieser Einheit angezeigt, und dafür eingegebene Zahlen werden in ihr gelesen.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Schriftgrade, Zeilenabstand und Grundlinienversatz werden in dieser Einheit angezeigt, und dafür eingegebene Zahlen werden in ihr gelesen.
The unit for East Asian type measurements, which no field uses yet. Die Einheit für Maße in ostasiatischem Text, die noch kein Feld verwendet.
When on, a number typed without a unit into a field in picas is read in points. Wenn aktiviert, wird eine ohne Einheit eingegebene Zahl in einem Feld in Pica als Punkt gelesen.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Mit XML-ID werden Objektnamen in „Ebenen“, „Variablen“ und „Ebenenoptionen“ als XML-IDs angezeigt.
Reset all preferences to their defaults? Alle Voreinstellungen auf ihre Standardwerte zurücksetzen?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Die Standardwerte werden angewendet, wenn Sie in den Voreinstellungen auf OK klicken. Abbrechen dort behält Ihre aktuellen Voreinstellungen.
Restore Recovered Documents Wiederhergestellte Dokumente öffnen
Can't render this file because it is too large.
+6
View File
@@ -3780,6 +3780,12 @@ digits Malayalam Μαλαγιάλαμ
Reshape Type Area Αναδιαμόρφωση περιοχής κειμένου
Responsive Αποκρινόμενο
Restore every preference to its default (applied on OK) Επαναφορά όλων των προτιμήσεων στις προεπιλογές τους (εφαρμογή με το Εντάξει)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Η μονάδα για τα νέα έγγραφα από ενσωματωμένα μεγέθη, εκτός από μεγέθη σε εικονοστοιχεία, και για τα ανοιγμένα αρχεία χωρίς καταγεγραμμένη μονάδα· αν την επιλέξετε εδώ και πατήσετε Εντάξει, γίνεται και μονάδα του ενεργού εγγράφου.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Τα πάχη περιγράμματος, οι παύλες και τα διάκενα εμφανίζονται σε αυτή τη μονάδα και οι αριθμοί που πληκτρολογούνται γι’ αυτά διαβάζονται σε αυτή.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Τα μεγέθη κειμένου, το διάστιχο και η μετατόπιση γραμμής βάσης εμφανίζονται σε αυτή τη μονάδα και οι αριθμοί που πληκτρολογούνται γι’ αυτά διαβάζονται σε αυτή.
The unit for East Asian type measurements, which no field uses yet. Η μονάδα για τις μετρήσεις κειμένου Ανατολικής Ασίας, την οποία δεν χρησιμοποιεί ακόμη κανένα πεδίο.
When on, a number typed without a unit into a field in picas is read in points. Όταν είναι ενεργό, ένας αριθμός που πληκτρολογείται χωρίς μονάδα σε πεδίο σε πίκες διαβάζεται σε σημεία.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Με το Αναγνωριστικό XML, τα ονόματα αντικειμένων εμφανίζονται ως αναγνωριστικά XML στα Επίπεδα, στις Μεταβλητές και στις Επιλογές επιπέδου.
Reset all preferences to their defaults? Επαναφορά όλων των προτιμήσεων στις προεπιλογές τους;
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Οι προεπιλογές εφαρμόζονται όταν κάνετε κλικ στο Εντάξει στις Προτιμήσεις. Το Ακύρωση εκεί διατηρεί τις τρέχουσες προτιμήσεις σας.
Restore Recovered Documents Επαναφορά ανακτημένων εγγράφων
Can't render this file because it is too large.
+6
View File
@@ -3041,6 +3041,12 @@ digits Malayalam Malayálam
Responsive Adaptable
Restore Restaurar
Restore every preference to its default (applied on OK) Restaurar todas las preferencias a sus valores predeterminados (se aplica al Aceptar)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. La unidad de los documentos nuevos de tamaños predefinidos, salvo los tamaños en píxeles, y de los archivos abiertos que no registran ninguna unidad; si la elige aquí y hace clic en Aceptar, también pasa a ser la unidad del documento activo.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Los grosores de trazo, los guiones y los huecos se muestran en esta unidad, y los números que se escriben para ellos se leen en ella.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Los tamaños de texto, el interlineado y el desplazamiento de línea de base se muestran en esta unidad, y los números que se escriben para ellos se leen en ella.
The unit for East Asian type measurements, which no field uses yet. La unidad para las medidas del texto de Asia oriental, que todavía no usa ningún campo.
When on, a number typed without a unit into a field in picas is read in points. Si está activado, un número escrito sin unidad en un campo en picas se lee en puntos.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Con ID XML, los nombres de los objetos se muestran como ID XML en Capas, Variables y Opciones de capa.
Reset all preferences to their defaults? ¿Restablecer todas las preferencias a sus valores predeterminados?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Los valores predeterminados se aplican al hacer clic en Aceptar en Preferencias. Cancelar ahí conserva sus preferencias actuales.
Restore Recovered Documents Restaurar documentos recuperados
Can't render this file because it contains an unexpected character in line 2 and column 73.
+6
View File
@@ -4402,6 +4402,12 @@ font-technology Variable Muuttuvat
Preferences Asetukset
Previous Edellinen
Restore every preference to its default (applied on OK) Palauta kaikki asetukset oletuksiin (käytetään, kun valitaan OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Yksikkö uusille asiakirjoille valmiissa kooissa pikselikokoja lukuun ottamatta ja avatuille tiedostoille, joihin ei ole tallennettu yksikköä; kun valitset sen tässä ja napsautat OK, siitä tulee myös aktiivisen asiakirjan yksikkö.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Viivan paksuudet, katkoviivat ja välit näytetään tässä yksikössä, ja niille kirjoitetut luvut luetaan siinä.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Tekstin koot, riviväli ja perusviivan siirto näytetään tässä yksikössä, ja niille kirjoitetut luvut luetaan siinä.
The unit for East Asian type measurements, which no field uses yet. Itä-Aasian tekstin mittojen yksikkö, jota mikään kenttä ei vielä käytä.
When on, a number typed without a unit into a field in picas is read in points. Kun asetus on käytössä, picoina näytettävään kenttään ilman yksikköä kirjoitettu luku luetaan pisteinä.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML-tunnus-asetuksella objektien nimet näytetään XML-tunnuksina kohteissa Tasot, Muuttujat ja Tason asetukset.
Reset all preferences to their defaults? Palautetaanko kaikki asetukset oletuksiin?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Oletukset otetaan käyttöön, kun valitset Asetuksissa OK. Peruuta siellä säilyttää nykyiset asetuksesi.
Smaller ↔ Larger Pienempi ↔ Suurempi
Can't render this file because it contains an unexpected character in line 2 and column 73.
+6
View File
@@ -3033,6 +3033,12 @@ digits Malayalam Malayalam
Responsive Adaptatif
Restore Restaurer
Restore every preference to its default (applied on OK) Rétablir toutes les préférences à leur valeur par défaut (appliqué avec OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. L’unité des nouveaux documents de tailles prédéfinies, sauf les tailles en pixels, et des fichiers ouverts qui n’enregistrent aucune unité, et si vous la choisissez ici puis cliquez sur OK, elle devient aussi l’unité du document actif.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Les épaisseurs de contour, les tirets et les espaces s’affichent dans cette unité, et les nombres saisis pour eux sont lus dans cette unité.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Les tailles de texte, l’interlignage et le décalage de la ligne de base s’affichent dans cette unité, et les nombres saisis pour eux sont lus dans cette unité.
The unit for East Asian type measurements, which no field uses yet. L’unité des mesures du texte d’Asie orientale, qu’aucun champ n’utilise encore.
When on, a number typed without a unit into a field in picas is read in points. Si cette option est activée, un nombre saisi sans unité dans un champ en picas est lu en points.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Avec ID XML, les noms des objets s’affichent sous forme d’ID XML dans Calques, Variables et Options de calque.
Reset all preferences to their defaults? Rétablir toutes les préférences à leur valeur par défaut ?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Les valeurs par défaut sont appliquées lorsque vous cliquez sur OK dans Préférences. Annuler y conserve vos préférences actuelles.
Restore Recovered Documents Restaurer les documents récupérés
Can't render this file because it is too large.
+6
View File
@@ -3096,6 +3096,12 @@
Restore પુનઃસ્થાપિત કરો
Restore Recovered Documents પુનઃપ્રાપ્ત દસ્તાવેજો પુનઃસ્થાપિત કરો
Restore every preference to its default (applied on OK) દરેક પસંદગી તેના ડિફોલ્ટ પર પુનઃસ્થાપિત કરો (ઠીક પર લાગુ થશે)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. પિક્સેલ સિવાયના બિલ્ટ-ઇન કદના નવા દસ્તાવેજો અને કોઈ એકમ ન નોંધતી ખોલેલી ફાઇલો માટેનો એકમ; અહીં તેને પસંદ કરીને ઠીક ક્લિક કરવાથી સક્રિય દસ્તાવેજનો એકમ પણ તે બને છે.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. સ્ટ્રોકની જાડાઈ, ડૅશ અને અંતર આ એકમમાં દેખાય છે, અને તેમના માટે ટાઇપ કરેલી સંખ્યાઓ આ એકમમાં વંચાય છે.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. ટાઇપના કદ, લીડિંગ અને બેઝલાઇન શિફ્ટ આ એકમમાં દેખાય છે, અને તેમના માટે ટાઇપ કરેલી સંખ્યાઓ આ એકમમાં વંચાય છે.
The unit for East Asian type measurements, which no field uses yet. પૂર્વ એશિયાઈ ટાઇપના માપ માટેનો એકમ, જેનો હજી કોઈ ફીલ્ડ ઉપયોગ કરતું નથી.
When on, a number typed without a unit into a field in picas is read in points. ચાલુ હોય ત્યારે, પાઇકામાં હોય તેવા ફીલ્ડમાં એકમ વિના ટાઇપ કરેલી સંખ્યા પોઇન્ટ્સમાં વંચાય છે.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML ID પસંદ હોય ત્યારે ઑબ્જેક્ટનાં નામ લેયર્સ, વેરિએબલ્સ અને લેયર વિકલ્પોમાં XML ID તરીકે દેખાય છે.
Restored documents open unsaved: save them to keep them. પુનઃસ્થાપિત દસ્તાવેજો અસાચવેલા ખુલશે: તેમને રાખવા માટે સાચવો.
Restrict printing, editing and other tasks છાપકામ, સંપાદન અને અન્ય કાર્યો પર પ્રતિબંધ મૂકો
Reticulation… રેટિક્યુલેશન…
Can't render this file because it contains an unexpected character in line 72 and column 5.
+6
View File
@@ -4154,6 +4154,12 @@ antiAlias Sharp शार्प
Responsive उत्तरदायी
Restore पुनर्स्थापित करें
Restore every preference to its default (applied on OK) प्रत्येक वरीयता को उसके डिफ़ॉल्ट में पुनर्स्थापित करें ( OK पर लागू)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. पिक्सेल को छोड़कर बिल्ट-इन साइज़ वाले नए डॉक्यूमेंट और कोई इकाई दर्ज न करने वाली खोली गई फ़ाइलों की इकाई; इसे यहाँ चुनकर ठीक है पर क्लिक करने से यह सक्रिय डॉक्यूमेंट की इकाई भी बन जाती है।
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. स्ट्रोक की मोटाई, डैश और गैप इस इकाई में दिखते हैं, और उनके लिए टाइप की गई संख्याएँ इसी इकाई में पढ़ी जाती हैं।
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. टाइप साइज़, लीडिंग और बेसलाइन शिफ़्ट इस इकाई में दिखते हैं, और उनके लिए टाइप की गई संख्याएँ इसी इकाई में पढ़ी जाती हैं।
The unit for East Asian type measurements, which no field uses yet. पूर्वी एशियाई टाइप के माप की इकाई, जिसका अभी कोई फ़ील्ड उपयोग नहीं करता।
When on, a number typed without a unit into a field in picas is read in points. चालू होने पर, पाइका वाले फ़ील्ड में बिना इकाई के टाइप की गई संख्या पॉइंट्स में पढ़ी जाती है।
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML ID चुनने पर ऑब्जेक्ट के नाम लेयर्स, वेरिएबल्स और लेयर ऑप्शन्स में XML ID के रूप में दिखते हैं।
Reset all preferences to their defaults? सभी प्रेफ़रेंसेज़ को उनके डिफ़ॉल्ट पर रीसेट करें?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. डिफ़ॉल्ट तब लागू होते हैं जब आप प्रेफ़रेंसेज़ में ठीक है पर क्लिक करते हैं। वहाँ रद्द करें आपकी मौजूदा प्रेफ़रेंसेज़ बनाए रखता है।
Restore Recovered Documents पुनर्स्थापना डॉक्यूमेंट
Can't render this file because it is too large.
+6
View File
@@ -3621,6 +3621,12 @@ mark-style Japanese Japán
Responsive Reszponzív
Restore Visszaállít
Restore every preference to its default (applied on OK) Minden beállítás visszaállítása az alapértékre (az OK gombbal lép életbe)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. A beépített, nem pixelben megadott méretű új dokumentumok és a mértékegységet nem rögzítő megnyitott fájlok mértékegysége; ha itt kiválasztja, és az OK gombra kattint, az aktív dokumentum mértékegysége is ez lesz.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. A körvonalvastagságok, a vonalak és a hézagok ebben a mértékegységben jelennek meg, és a hozzájuk beírt számokat is ebben értelmezi a program.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. A betűméretek, a sorköz és az alapvonal-eltolás ebben a mértékegységben jelennek meg, és a hozzájuk beírt számokat is ebben értelmezi a program.
The unit for East Asian type measurements, which no field uses yet. A kelet-ázsiai szöveg méreteinek mértékegysége, amelyet egyelőre egyetlen mező sem használ.
When on, a number typed without a unit into a field in picas is read in points. Bekapcsolva egy pica mértékegységű mezőbe mértékegység nélkül beírt számot pontként értelmez a program.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML-azonosító esetén az objektumnevek XML-azonosítóként jelennek meg a Rétegek, a Változók és a Rétegbeállítások ablakban.
Reset all preferences to their defaults? Visszaállítja az összes beállítást az alapértékre?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Az alapértékek akkor lépnek életbe, amikor a Beállításokban az OK gombra kattint. Az ottani Mégse megtartja a jelenlegi beállításokat.
Restore Recovered Documents Helyreállított dokumentumok visszaállítása
Can't render this file because it is too large.
+6
View File
@@ -4134,6 +4134,12 @@ font-technology Variable Variabel
Preferences Preferensi
Previous Sebelumnya
Restore every preference to its default (applied on OK) Kembalikan semua preferensi ke defaultnya (diterapkan saat OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Satuan untuk dokumen baru dari ukuran bawaan selain ukuran piksel dan untuk file yang dibuka tanpa satuan tercatat; jika Anda memilihnya di sini lalu mengklik OK, satuan dokumen aktif juga menjadi satuan ini.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Ketebalan stroke, putus-putus, dan jarak ditampilkan dalam satuan ini, dan angka yang diketik untuknya dibaca dalam satuan ini.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Ukuran teks, leading, dan pergeseran garis dasar ditampilkan dalam satuan ini, dan angka yang diketik untuknya dibaca dalam satuan ini.
The unit for East Asian type measurements, which no field uses yet. Satuan untuk ukuran teks Asia Timur, yang belum digunakan bidang mana pun.
When on, a number typed without a unit into a field in picas is read in points. Jika aktif, angka yang diketik tanpa satuan di bidang dalam pica dibaca dalam titik.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Dengan ID XML, nama objek ditampilkan sebagai ID XML di Lapisan, Variabel, dan Opsi lapisan.
Reset all preferences to their defaults? Atur ulang semua preferensi ke defaultnya?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Nilai default diterapkan saat Anda mengklik OK di Preferensi. Batal di sana mempertahankan preferensi Anda saat ini.
Smaller ↔ Larger Lebih kecil ↔ Lebih besar
Can't render this file because it contains an unexpected character in line 2482 and column 5.
+6
View File
@@ -3082,6 +3082,12 @@ digits Malayalam Malayalam
Responsive Adattivo
Restore Ripristina
Restore every preference to its default (applied on OK) Ripristina tutte le preferenze ai valori predefiniti (applicato con OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. L'unità dei nuovi documenti nelle dimensioni predefinite, tranne quelle in pixel, e dei file aperti che non registrano alcuna unità; sceglierla qui e fare clic su OK la imposta anche per il documento attivo.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Gli spessori della traccia, i trattini e gli spazi sono mostrati in questa unità, e i numeri digitati per essi sono letti in questa unità.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Dimensioni del testo, interlinea e spostamento della linea di base sono mostrati in questa unità, e i numeri digitati per essi sono letti in questa unità.
The unit for East Asian type measurements, which no field uses yet. L'unità per le misure del testo dell'Asia orientale, che nessun campo usa ancora.
When on, a number typed without a unit into a field in picas is read in points. Se attiva, un numero digitato senza unità in un campo in pica viene letto in punti.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Con ID XML, i nomi degli oggetti sono mostrati come ID XML in Livelli, Variabili e Opzioni livello.
Reset all preferences to their defaults? Ripristinare tutte le preferenze ai valori predefiniti?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. I valori predefiniti vengono applicati quando fai clic su OK in Preferenze. Annulla lì mantiene le preferenze attuali.
Restore Recovered Documents Ripristina documenti recuperati
Can't render this file because it is too large.
+6
View File
@@ -3059,6 +3059,12 @@ mark-style Japanese 日本式
Restore 復元
Restore Recovered Documents 復帰したドキュメントを復元
Restore every preference to its default (applied on OK) すべての環境設定を初期値に戻す (OK で適用)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. ピクセル以外の組み込みサイズの新規ドキュメントと、単位を記録していない開いたファイルに使う単位で、ここで選んで OK をクリックすると作業中のドキュメントの単位も変わります。
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. 線幅、線分、間隔はこの単位で表示され、入力した数値もこの単位で読み取られます。
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. フォントサイズ、行送り、ベースラインシフトはこの単位で表示され、入力した数値もこの単位で読み取られます。
The unit for East Asian type measurements, which no field uses yet. 東アジア言語の文字の測定に使う単位で、まだどのフィールドも使っていません。
When on, a number typed without a unit into a field in picas is read in points. オンのとき、パイカのフィールドに単位なしで入力した数値はポイントとして読み取られます。
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML ID を選ぶと、レイヤー、変数、レイヤーオプションでオブジェクト名が XML ID として表示されます。
Reset all preferences to their defaults? すべての環境設定を初期値に戻しますか?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. 初期値は環境設定で OK をクリックすると適用されます。そこでキャンセルすると現在の環境設定が保たれます。
Restored documents open unsaved: save them to keep them. 復元したドキュメントは未保存の状態で開きます。保存して残してください。
Can't render this file because it is too large.
+6
View File
@@ -6086,6 +6086,12 @@ font-technology Variable ცვლადი
Preferences პარამეტრები
Previous წინა
Restore every preference to its default (applied on OK) ყველა პარამეტრის ნაგულისხმევ მნიშვნელობაზე დაბრუნება (გამოიყენება OK-ზე დაჭერისას)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. ახალი დოკუმენტების ერთეული ჩაშენებული ზომებით, პიქსელური ზომების გარდა, და გახსნილი ფაილებისა, რომლებიც ერთეულს არ ინახავს; თუ აქ აირჩევთ და OK-ს დააწკაპუნებთ, ის აქტიური დოკუმენტის ერთეულიც გახდება.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. კონტურის სისქე, ტირეები და შუალედები ამ ერთეულში ჩანს, და მათთვის აკრეფილი რიცხვები ამ ერთეულში იკითხება.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. ტექსტის ზომა, სტრიქონთა დაშორება და საბაზისო ხაზის წანაცვლება ამ ერთეულში ჩანს, და მათთვის აკრეფილი რიცხვები ამ ერთეულში იკითხება.
The unit for East Asian type measurements, which no field uses yet. აღმოსავლეთაზიური ტექსტის ზომების ერთეული, რომელსაც ჯერჯერობით არცერთი ველი არ იყენებს.
When on, a number typed without a unit into a field in picas is read in points. ჩართვისას პიკებში მოცემულ ველში ერთეულის გარეშე აკრეფილი რიცხვი პუნქტებში იკითხება.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML ID-ის არჩევისას ობიექტების სახელები შრეებში, ცვლადებსა და შრის პარამეტრებში XML ID-ად ჩანს.
Reset all preferences to their defaults? დავაბრუნოთ ყველა პარამეტრი ნაგულისხმევ მნიშვნელობებზე?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. ნაგულისხმევი მნიშვნელობები გამოიყენება, როცა პარამეტრებში OK-ს დააჭერთ. იქ გაუქმება ინარჩუნებს თქვენს მიმდინარე პარამეტრებს.
Smaller ↔ Larger უფრო პატარა ↔ უფრო დიდი
Can't render this file because it is too large.
+6
View File
@@ -3048,6 +3048,12 @@ mark-style Japanese 일본식
Restore 복원
Restore Recovered Documents 복구된 문서 복원
Restore every preference to its default (applied on OK) 모든 환경 설정을 기본값으로 복원(확인 시 적용)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. 픽셀 크기가 아닌 기본 제공 크기의 새 문서와 단위가 기록되지 않은 열린 파일에 쓰는 단위이며, 여기서 고르고 확인을 누르면 활성 문서의 단위도 바뀝니다.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. 선 두께, 대시, 간격이 이 단위로 표시되며, 입력한 숫자도 이 단위로 읽습니다.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. 글자 크기, 행간, 기준선 이동이 이 단위로 표시되며, 입력한 숫자도 이 단위로 읽습니다.
The unit for East Asian type measurements, which no field uses yet. 동아시아 문자 측정에 쓰는 단위로, 아직 이 단위를 쓰는 필드는 없습니다.
When on, a number typed without a unit into a field in picas is read in points. 켜면 파이카 필드에 단위 없이 입력한 숫자를 포인트로 읽습니다.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML ID를 고르면 레이어, 변수, 레이어 옵션에서 개체 이름이 XML ID로 표시됩니다.
Reset all preferences to their defaults? 모든 환경 설정을 기본값으로 재설정하시겠습니까?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. 기본값은 환경 설정에서 확인을 클릭하면 적용됩니다. 그곳에서 취소를 누르면 현재 환경 설정이 유지됩니다.
Restored documents open unsaved: save them to keep them. 복원된 문서는 저장되지 않은 상태로 열립니다. 보존하려면 저장하세요.
Can't render this file because it is too large.
+6
View File
@@ -4724,6 +4724,12 @@ font-technology Variable Variabel
Preferences Voorkeuren
Previous Vorige
Restore every preference to its default (applied on OK) Elke voorkeur terugzetten naar de standaard (toegepast bij OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. De eenheid voor nieuwe documenten in de ingebouwde formaten, behalve formaten in pixels, en voor geopende bestanden die geen eenheid vastleggen; kiest u die hier en klikt u op OK, dan krijgt ook het actieve document deze eenheid.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Contourdiktes, streepjes en tussenruimtes worden in deze eenheid getoond, en getallen die ervoor worden getypt, worden erin gelezen.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Tekstgroottes, regelafstand en basislijnverschuiving worden in deze eenheid getoond, en getallen die ervoor worden getypt, worden erin gelezen.
The unit for East Asian type measurements, which no field uses yet. De eenheid voor maten van Oost-Aziatische tekst, die nog geen enkel veld gebruikt.
When on, a number typed without a unit into a field in picas is read in points. Wanneer dit aan staat, wordt een getal dat zonder eenheid in een veld in pica's wordt getypt, in punten gelezen.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Met XML-id worden objectnamen als XML-id's getoond in Lagen, Variabelen en Laagopties.
Reset all preferences to their defaults? Alle voorkeuren terugzetten naar de standaardwaarden?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. De standaardwaarden worden toegepast wanneer u in Voorkeuren op OK klikt. Annuleren daar behoudt uw huidige voorkeuren.
Smaller ↔ Larger Kleiner ↔ Groter
Can't render this file because it is too large.
+6
View File
@@ -4324,6 +4324,12 @@ font-technology Variable Zmienne
Preferences Preferencje
Previous Wstecz
Restore every preference to its default (applied on OK) Przywróć domyślne wartości wszystkich preferencji (zastosowane po OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Jednostka nowych dokumentów o wbudowanych rozmiarach, z wyjątkiem rozmiarów w pikselach, oraz otwartych plików bez zapisanej jednostki; wybranie jej tutaj i kliknięcie OK ustawia ją też w aktywnym dokumencie.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Grubości obrysu, kreski i odstępy są wyświetlane w tej jednostce, a liczby wpisane dla nich są w niej odczytywane.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Rozmiary tekstu, interlinia i przesunięcie linii bazowej są wyświetlane w tej jednostce, a liczby wpisane dla nich są w niej odczytywane.
The unit for East Asian type measurements, which no field uses yet. Jednostka miar tekstu wschodnioazjatyckiego, której żadne pole jeszcze nie używa.
When on, a number typed without a unit into a field in picas is read in points. Gdy opcja jest włączona, liczba wpisana bez jednostki w polu w pica jest odczytywana w punktach.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Przy ID XML nazwy obiektów są wyświetlane jako ID XML w Warstwach, Zmiennych i Opcjach warstwy.
Reset all preferences to their defaults? Przywrócić domyślne wartości wszystkich preferencji?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Wartości domyślne zostaną zastosowane po kliknięciu OK w Preferencjach. Anuluj w tym oknie zachowuje bieżące preferencje.
Smaller ↔ Larger Mniejszy ↔ większy
Can't render this file because it is too large.
+6
View File
@@ -2533,6 +2533,12 @@ digits Malayalam Malaiala
Restore Restaurar
Restore Recovered Documents Restaurar Documentos Recuperados
Restore every preference to its default (applied on OK) Restaurar toda preferência ao padrão (aplicado em OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. A unidade dos novos documentos de tamanhos predefinidos, exceto os tamanhos em pixels, e dos arquivos abertos que não registram nenhuma unidade; escolhê-la aqui e clicar em OK também a define no documento ativo.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. As espessuras de traçado, os traços e as lacunas aparecem nesta unidade, e os números digitados para eles são lidos nela.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Tamanhos de texto, entrelinhamento e deslocamento da linha de base aparecem nesta unidade, e os números digitados para eles são lidos nela.
The unit for East Asian type measurements, which no field uses yet. A unidade das medidas de texto do Leste Asiático, que nenhum campo usa ainda.
When on, a number typed without a unit into a field in picas is read in points. Quando ativado, um número digitado sem unidade em um campo em picas é lido em pontos.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Com ID XML, os nomes dos objetos aparecem como IDs XML em Camadas, Variáveis e Opções de Camada.
Reset all preferences to their defaults? Redefinir todas as preferências para o padrão?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Os padrões são aplicados quando você clica em OK em Preferências. Cancelar ali mantém suas preferências atuais.
Restored documents open unsaved: save them to keep them. Os documentos restaurados abrem sem salvar: salve-os para mantê-los.
Can't render this file because it is too large.
+6
View File
@@ -3071,6 +3071,12 @@ digits Malayalam Малаялам
Responsive Адаптивный
Restore Восстановить
Restore every preference to its default (applied on OK) Восстановить все настройки по умолчанию (применяется при нажатии ОК)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Единица новых документов встроенных размеров, кроме размеров в пикселях, и открытых файлов без записанной единицы; если выбрать её здесь и нажать ОК, она станет и единицей активного документа.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Толщина обводки, штрихи и зазоры показываются в этой единице, и введённые для них числа читаются в ней.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Размеры текста, интерлиньяж и смещение базовой линии показываются в этой единице, и введённые для них числа читаются в ней.
The unit for East Asian type measurements, which no field uses yet. Единица для размеров восточноазиатского текста, которую пока не использует ни одно поле.
When on, a number typed without a unit into a field in picas is read in points. Если включено, число, введённое без единицы в поле в пиках, читается в пунктах.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. При XML ID имена объектов показываются как XML ID в «Слоях», «Переменных» и «Параметрах слоя».
Reset all preferences to their defaults? Сбросить все настройки до значений по умолчанию?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Значения по умолчанию применяются, когда вы нажимаете ОК в окне «Настройки». Отмена там сохраняет текущие настройки.
Restore Recovered Documents Восстановить восстановленные документы
Can't render this file because it is too large.
+6
View File
@@ -2975,6 +2975,12 @@ digits Malayalam Malayalam
Responsive Responsiv
Restore Återställ
Restore every preference to its default (applied on OK) Återställ alla inställningar till standard (verkställs vid OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Enheten för nya dokument i de inbyggda storlekarna, utom storlekar i pixlar, och för öppnade filer som inte anger någon enhet; om du väljer den här och klickar på OK får även det aktiva dokumentet den enheten.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Konturtjocklekar, streck och mellanrum visas i den här enheten, och tal som skrivs för dem läses i den.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Teckenstorlekar, radavstånd och baslinjeförskjutning visas i den här enheten, och tal som skrivs för dem läses i den.
The unit for East Asian type measurements, which no field uses yet. Enheten för mått i östasiatisk text, som inget fält använder ännu.
When on, a number typed without a unit into a field in picas is read in points. När det är på läses ett tal som skrivs utan enhet i ett fält i pica i punkter.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Med XML-id visas objektnamn som XML-id:n i Lager, Variabler och Lageralternativ.
Reset all preferences to their defaults? Återställa alla inställningar till standard?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Standardvärdena verkställs när du klickar på OK i Inställningar. Avbryt där behåller dina nuvarande inställningar.
Restore Recovered Documents Återställ återskapade dokument
Can't render this file because it is too large.
+6
View File
@@ -2812,6 +2812,12 @@ digits Malayalam Malayalam
Responsive duyarlı
Restore Geri yükle
Restore every preference to its default (applied on OK) Her tercihi varsayılana geri yükleyin (Tamam'a uygulanır)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Piksel boyutları dışındaki yerleşik boyutlardaki yeni belgelerin ve birim kaydetmeyen açılan dosyaların birimi; burada seçip Tamam'a tıkladığınızda etkin belgenin birimi de bu olur.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Kontur kalınlıkları, kısa çizgiler ve boşluklar bu birimde gösterilir ve bunlar için yazılan sayılar bu birimde okunur.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Yazı boyutları, satır aralığı ve taban çizgisi kayması bu birimde gösterilir ve bunlar için yazılan sayılar bu birimde okunur.
The unit for East Asian type measurements, which no field uses yet. Doğu Asya metni ölçüleri için henüz hiçbir alanın kullanmadığı birim.
When on, a number typed without a unit into a field in picas is read in points. Açıkken, pika cinsinden bir alana birimsiz yazılan sayı punto olarak okunur.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. XML kimliği seçiliyken nesne adları Katmanlar, Değişkenler ve Katman Seçenekleri'nde XML kimliği olarak gösterilir.
Reset all preferences to their defaults? Tüm tercihler varsayılanlarına sıfırlansın mı?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Varsayılanlar, Tercihler'de Tamam'a tıkladığınızda uygulanır. Oradaki İptal, mevcut tercihlerinizi korur.
Restore Recovered Documents Kurtarılan Belgeleri Geri Yükle
Can't render this file because it is too large.
+6
View File
@@ -3074,6 +3074,12 @@ digits Malayalam Малаялам
Responsive Адаптивний
Restore Відновити
Restore every preference to its default (applied on OK) Відновити всі параметри за промовчанням (застосовується при натисканні ОК)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Одиниця нових документів вбудованих розмірів, крім розмірів у пікселях, і відкритих файлів без записаної одиниці; якщо вибрати її тут і натиснути ОК, вона стане й одиницею активного документа.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Товщина обведення, штрихи й зазори показуються в цій одиниці, і введені для них числа читаються в ній.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Розміри тексту, інтерліньяж і зміщення базової лінії показуються в цій одиниці, і введені для них числа читаються в ній.
The unit for East Asian type measurements, which no field uses yet. Одиниця для розмірів східноазіатського тексту, якої поки не використовує жодне поле.
When on, a number typed without a unit into a field in picas is read in points. Якщо ввімкнено, число, введене без одиниці в поле в піках, читається в пунктах.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. З XML ID назви об’єктів показуються як XML ID у «Шарах», «Змінних» і «Параметрах шару».
Reset all preferences to their defaults? Скинути всі налаштування до значень за промовчанням?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Значення за промовчанням застосовуються, коли ви натискаєте ОК у вікні «Налаштування». Скасувати там зберігає поточні налаштування.
Restore Recovered Documents Відновити відновлені документи
Can't render this file because it is too large.
+6
View File
@@ -3388,6 +3388,12 @@ mark-style Japanese Kiểu Nhật
Responsive Đáp ứng
Restore Khôi phục
Restore every preference to its default (applied on OK) Khôi phục tất cả tùy chọn về mặc định (áp dụng khi nhấn OK)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. Đơn vị cho tài liệu mới theo kích thước dựng sẵn, trừ kích thước bằng pixel, và cho tệp đã mở không ghi đơn vị; chọn đơn vị ở đây rồi bấm OK cũng đặt nó cho tài liệu đang hoạt động.
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. Độ dày nét, nét đứt và khoảng cách hiển thị theo đơn vị này, và số nhập cho chúng được đọc theo đơn vị này.
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. Cỡ chữ, giãn dòng và dịch chuyển đường cơ sở hiển thị theo đơn vị này, và số nhập cho chúng được đọc theo đơn vị này.
The unit for East Asian type measurements, which no field uses yet. Đơn vị cho số đo chữ Đông Á, hiện chưa có trường nào dùng.
When on, a number typed without a unit into a field in picas is read in points. Khi bật, số nhập không có đơn vị vào trường tính bằng pica được đọc theo điểm.
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. Với XML ID, tên đối tượng hiển thị dưới dạng XML ID trong Các lớp, Biến số và Tùy chọn lớp.
Reset all preferences to their defaults? Đặt lại tất cả tùy chọn về mặc định?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. Giá trị mặc định được áp dụng khi bạn nhấn OK trong Tùy chọn. Hủy ở đó giữ nguyên các tùy chọn hiện tại của bạn.
Restore Recovered Documents Khôi phục tài liệu đã phục hồi
Can't render this file because it contains an unexpected character in line 205 and column 5.
+6
View File
@@ -2933,6 +2933,12 @@ digits Malayalam 马拉雅拉姆数字
Responsive 响应式
Restore 恢复
Restore every preference to its default (applied on OK) 把所有首选项恢复为默认值 (点击确定后应用)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. 除像素尺寸外,以内置尺寸新建的文档和未记录单位的已打开文件使用此单位;在此选择并点击确定,也会更改当前文档的单位。
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. 描边粗细、虚线和间隔以此单位显示,为其输入的数字也按此单位读取。
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. 字号、行距和基线偏移以此单位显示,为其输入的数字也按此单位读取。
The unit for East Asian type measurements, which no field uses yet. 用于东亚文字度量的单位,目前还没有字段使用。
When on, a number typed without a unit into a field in picas is read in points. 开启后,在以派卡为单位的字段中输入的不带单位的数字按点读取。
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. 选择 XML ID 时,图层、变量和图层选项中的对象名称显示为 XML ID。
Reset all preferences to their defaults? 将所有首选项重置为默认值?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. 在首选项中点击确定后才会应用默认值。在那里点击取消会保留当前首选项。
Restore Recovered Documents 恢复已恢复的文档
Can't render this file because it is too large.
+6
View File
@@ -4183,6 +4183,12 @@ digits Malayalam 馬來亞拉姆數字
Responsive 回應式
Restore 還原
Restore every preference to its default (applied on OK) 將所有偏好設定還原為預設值 (按下確定後套用)
The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units. 除像素尺寸外,以內建尺寸新增的文件及未記錄單位的已開啟檔案使用此單位;在此選擇並按下確定,也會變更目前文件的單位。
Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it. 筆畫寬度、虛線和間隙以此單位顯示,為其輸入的數字也以此單位讀取。
Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it. 字體大小、行距和基線位移以此單位顯示,為其輸入的數字也以此單位讀取。
The unit for East Asian type measurements, which no field uses yet. 用於東亞文字度量的單位,目前還沒有欄位使用。
When on, a number typed without a unit into a field in picas is read in points. 開啟後,在以派卡為單位的欄位中輸入的不含單位數字以點讀取。
With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options. 選擇 XML ID 時,圖層、變數和圖層選項中的物件名稱會顯示為 XML ID。
Reset all preferences to their defaults? 要將所有偏好設定重設為預設值嗎?
The defaults are applied when you click OK in Preferences. Cancel there keeps your current preferences. 在偏好設定中按下確定後才會套用預設值。在那裡按下取消會保留目前的偏好設定。
Restore Recovered Documents 還原找回的文件
Can't render this file because it is too large.
+87 -4
View File
@@ -12,6 +12,8 @@ use crate::state::Dialog;
use crate::theme::{self, Accent, Brightness, Scheme, Tokens};
use crate::{VectorcraftApp, widgets};
mod descriptions;
/// UI-only fields shown in the dialog (backed by `UiState`, not engine prefs).
pub const UI_FIELDS: &[(&str, &str, &str)] = &[
("__smartGuides", "Smart Guides", "Smart Guides (View → Smart Guides)"),
@@ -398,9 +400,12 @@ pub fn show(app: &mut VectorcraftApp, ctx: &egui::Context) {
ui.set_width(530.0);
ui.label(egui::RichText::new(tl!(cat)).font(theme::semibold(14.0)).color(t.text_strong));
ui.add_space(8.0);
egui::ScrollArea::vertical().id_salt(("prefs", cat)).max_height(400.0).auto_shrink([false, false]).show(ui, |ui| {
category_fields(ui, app, &mut d, cat);
});
// The description line takes its height from the list, so the column stays FIELDS_HEIGHT tall.
let list_height = FIELDS_HEIGHT - ui.spacing().item_spacing.y - DESCRIPTION_GAP - DESCRIPTION_HEIGHT;
let scroll = egui::ScrollArea::vertical().id_salt(("prefs", cat)).max_height(list_height).auto_shrink([false, false]);
let out = scroll.show(ui, |ui| category_fields(ui, app, &mut d, cat));
ui.add_space(DESCRIPTION_GAP);
description_line(ui, cat, out.inner_rect, &out.inner);
});
});
ui.add_space(14.0);
@@ -477,22 +482,97 @@ pub(crate) fn reset_fields(d: &mut Dialog) {
d.fields.insert(RESET_UNITS.into(), d.fields.get("unitsGeneral").cloned().unwrap_or(Value::Null));
}
fn category_fields(ui: &mut egui::Ui, app: &mut VectorcraftApp, d: &mut Dialog, cat: &str) {
/// The height of the fields column under the category's name: the field list, the gap and the
/// description line.
const FIELDS_HEIGHT: f32 = 400.0;
/// The gap above the description line.
const DESCRIPTION_GAP: f32 = 6.0;
/// The description line's height: three lines of its text.
const DESCRIPTION_HEIGHT: f32 = 48.0;
/// The line under the field list `list` of the category `cat`: in dim text, the sentence that
/// describes the setting under the pointer, else the setting with the keyboard focus, or nothing.
/// It keeps its height either way. While the pointer stays over the list or the line, between rows
/// too, the line keeps the setting it last described under the pointer.
fn description_line(ui: &mut egui::Ui, cat: &str, list: egui::Rect, rows: &DescribedRows) {
let t = Tokens::get(ui.ctx());
let (line, _) = ui.allocate_exact_size(egui::vec2(ui.available_width(), DESCRIPTION_HEIGHT), egui::Sense::hover());
let column = list.union(line);
// (pass, category, setting last described under the pointer); only the previous pass's counts,
// so a dialog closed and opened again starts empty.
let id = egui::Id::unique("prefs-description-hovered");
let pass = ui.ctx().cumulative_pass_nr();
let last = ui
.data(|m| m.get_temp::<(u64, String, Option<&'static str>)>(id))
.filter(|(p, c, _)| pass.saturating_sub(*p) <= 1 && c == cat)
.and_then(|(_, _, k)| k);
let hovered = rows.hovered.or_else(|| last.filter(|_| ui.rect_contains_pointer(column)));
ui.data_mut(|m| m.insert_temp(id, (pass, cat.to_string(), hovered)));
// The tests measure the column and the line.
#[cfg(test)]
ui.data_mut(|m| m.insert_temp(egui::Id::unique("prefs-description-rects"), (column, line)));
let Some(text) = hovered.or(rows.focused).and_then(descriptions::description) else { return };
let mut job = egui::text::LayoutJob::simple(tl!(text).to_string(), egui::FontId::proportional(11.5), t.text_dim, line.width());
job.wrap.max_rows = 3;
let galley = ui.painter().layout_job(job);
ui.painter().with_clip_rect(line).galley(line.min, galley, t.text_dim);
}
/// The rows of the settings the description line can describe: the row under the pointer, and the
/// row holding the control with the keyboard focus.
#[derive(Default)]
struct DescribedRows {
hovered: Option<&'static str>,
focused: Option<&'static str>,
}
impl DescribedRows {
/// After the row of the setting `key`, drawn from `top` down. A row this platform does not draw
/// takes no space and is skipped. A screen reader gets the row's sentence as the description of
/// its focused control.
fn row(&mut self, ui: &egui::Ui, key: &'static str, top: f32) {
let bottom = ui.min_rect().bottom();
if bottom <= top {
return;
}
let rect = egui::Rect::from_x_y_ranges(ui.max_rect().x_range(), top..=bottom);
if ui.rect_contains_pointer(rect) {
self.hovered = Some(key);
}
let Some(id) = ui.memory(|m| m.focused()) else { return };
if ui.ctx().read_response(id).is_some_and(|r| rect.contains(r.rect.center())) {
self.focused = Some(key);
if let Some(text) = descriptions::description(key) {
ui.ctx().accesskit_node_builder(id, |node| node.set_description(tl!(text).to_string()));
}
}
}
}
/// The fields of the category `cat`. → The rows under the pointer and with the keyboard focus.
fn category_fields(ui: &mut egui::Ui, app: &mut VectorcraftApp, d: &mut Dialog, cat: &str) -> DescribedRows {
let t = Tokens::get(ui.ctx());
let mut section = "";
let mut first = true;
let mut described = DescribedRows::default();
let specs: Vec<_> = PREF_SPECS.iter().filter(|s| s.category == cat).collect();
for (key, c, label) in UI_FIELDS {
if *c == cat && cat != "Smart Guides" {
let top = ui.cursor().top();
let mark = found_mark(ui, d, key);
bool_row(ui, d, key, label);
found_paint(ui, d, mark);
described.row(ui, key, top);
}
}
if cat == "Smart Guides" {
let top = ui.cursor().top();
let mark = found_mark(ui, d, "__smartGuides");
bool_row(ui, d, "__smartGuides", UI_FIELDS[0].2);
found_paint(ui, d, mark);
described.row(ui, "__smartGuides", top);
ui.add_space(4.0);
}
for sp in specs {
@@ -508,6 +588,7 @@ fn category_fields(ui: &mut egui::Ui, app: &mut VectorcraftApp, d: &mut Dialog,
}
first = false;
let v = d.fields.get(sp.key).cloned().unwrap_or(Value::Null);
let top = ui.cursor().top();
let mark = found_mark(ui, d, sp.key);
match sp.kind {
// General › Scroll Sideways with Cmd/Ctrl + Wheel acts only while Zoom with Mouse Wheel
@@ -693,7 +774,9 @@ fn category_fields(ui: &mut egui::Ui, app: &mut VectorcraftApp, d: &mut Dialog,
}
}
found_paint(ui, d, mark);
described.row(ui, sp.key, top);
}
described
}
/// Choose… beside the folder preference `key`: the folder picked becomes the field's value when it
@@ -0,0 +1,22 @@
//! The sentence the Preferences dialog shows under its fields for the setting under the pointer,
//! or for the setting whose control has the keyboard focus, by the setting's key, in English.
//! Every sentence has a row in each complete catalog.
/// (preference key, sentence), in the order the dialog lists the settings.
pub(crate) const DESCRIPTIONS: &[(&str, &str)] = &[
// Units
(
"unitsGeneral",
"The unit for new documents from built-in sizes other than pixel sizes and for opened files that record no unit; choosing one here and clicking OK also sets the active document's units.",
),
("unitsStroke", "Stroke weights, dashes and gaps show in this unit, and numbers typed for them are read in it."),
("unitsType", "Type sizes, leading and baseline shift show in this unit, and numbers typed for them are read in it."),
("unitsAsianType", "The unit for East Asian type measurements, which no field uses yet."),
("numbersWithoutUnitsArePoints", "When on, a number typed without a unit into a field in picas is read in points."),
("identifyObjectsBy", "With XML ID, object names show as XML IDs in the Layers panel, the Variables panel and Layer Options."),
];
/// The sentence that describes the setting `key`, in English, or `None` when it has none yet.
pub(crate) fn description(key: &str) -> Option<&'static str> {
DESCRIPTIONS.iter().find(|(k, _)| *k == key).map(|(_, s)| *s)
}
+245 -2
View File
@@ -1075,7 +1075,9 @@ fn scroll_sideways_with_cmd_wheel_dims_with_zoom_with_mouse_wheel() {
let mut frame = |d: &mut Dialog, events: Vec<egui::Event>| {
let raw =
egui::RawInput { screen_rect: Some(egui::Rect::from_min_size(egui::Pos2::ZERO, egui::vec2(600.0, 900.0))), events, ..Default::default() };
let mut out = ctx.run_ui(raw, |ui| category_fields(ui, &mut a, d, "General"));
let mut out = ctx.run_ui(raw, |ui| {
category_fields(ui, &mut a, d, "General");
});
out.textures_delta.clear();
out.shapes.iter().find_map(|c| label(&c.shape, "Scroll Sideways with Cmd/Ctrl + Wheel"))
};
@@ -1113,7 +1115,9 @@ fn show_samples_on_white_dims_without_in_menu_font_previews() {
events,
..Default::default()
};
let mut out = ctx.run_ui(raw, |ui| category_fields(ui, &mut a, d, "Type"));
let mut out = ctx.run_ui(raw, |ui| {
category_fields(ui, &mut a, d, "Type");
});
out.textures_delta.clear();
out.shapes.iter().find_map(|c| label(&c.shape, "Show samples on white"))
};
@@ -1625,3 +1629,242 @@ fn ok_refuses_a_typed_folder_outside_the_automation_roots_before_looking_at_it()
}
let _ = std::fs::remove_dir_all(&dir);
}
/// One frame of the open Preferences dialog with `events`, a quarter second after the last. → The
/// texts it painted where they show (a text its clip rectangle hides is left out), with their
/// rectangles, and the description of each accessibility node that has one.
fn description_frame(a: &mut VectorcraftApp, ctx: &egui::Context, events: Vec<egui::Event>) -> (Vec<(String, egui::Rect)>, Vec<String>) {
let time = ctx.input(|i| i.time) + 0.25;
let screen_rect = Some(egui::Rect::from_min_size(egui::Pos2::ZERO, egui::vec2(1200.0, 900.0)));
let raw = egui::RawInput { screen_rect, events, time: Some(time), ..Default::default() };
let mut out = ctx.run_ui(raw, |ui| show(a, ui.ctx()));
out.textures_delta.clear();
fn walk(s: &egui::Shape, clip: egui::Rect, v: &mut Vec<(String, egui::Rect)>) {
match s {
egui::Shape::Text(t) => {
let r = egui::Rect::from_min_size(t.pos, t.galley.size());
if r.intersects(clip) {
v.push((t.galley.text().to_string(), r));
}
}
egui::Shape::Vec(s) => s.iter().for_each(|s| walk(s, clip, v)),
_ => {}
}
}
let mut texts = vec![];
out.shapes.iter().for_each(|c| walk(&c.shape, c.clip_rect, &mut texts));
let nodes = out.platform_output.accesskit_update.map(|u| u.nodes).unwrap_or_default();
let described = nodes.iter().filter_map(|(_, n)| n.description().map(str::to_string)).collect();
(texts, described)
}
/// The Preferences window's rectangle.
fn preferences_window(ctx: &egui::Context) -> egui::Rect {
ctx.memory(|m| m.area_rect(egui::Id::unique("dialog-preferences"))).expect("the dialog window is shown")
}
/// Whether one of `texts` is `sentence`.
fn painted(texts: &[(String, egui::Rect)], sentence: &str) -> bool {
texts.iter().any(|(t, _)| t == sentence)
}
/// The pointer over a Units row shows that row's sentence at the bottom of the dialog, and the
/// dialog keeps its size.
#[test]
fn hovering_a_units_row_shows_its_description() {
let mut a = app();
open(&mut a, Some("Units"));
let ctx = egui::Context::default();
crate::theme::install_fonts(&ctx);
description_frame(&mut a, &ctx, vec![]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
let size = preferences_window(&ctx).size();
let general = descriptions::description("unitsGeneral").expect("Units › General has a sentence");
let stroke = descriptions::description("unitsStroke").expect("Units › Stroke has a sentence");
assert!(!painted(&texts, general), "nothing is described before the pointer comes");
let row = |texts: &[(String, egui::Rect)], label: &str| {
texts.iter().find(|(t, _)| t == label).map(|(_, r)| r.center()).unwrap_or_else(|| panic!("no `{label}` in {texts:?}"))
};
let at = row(&texts, "General:");
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(at)]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(painted(&texts, general), "the General row's sentence shows: {texts:?}");
assert!(!painted(&texts, stroke));
let line = texts.iter().find(|(t, _)| t == general).map(|(_, r)| *r).unwrap();
let ok = row(&texts, "OK");
assert!(line.bottom() < ok.y, "the sentence is above OK: {line:?}, {ok:?}");
assert_eq!(preferences_window(&ctx).size(), size, "the dialog keeps its size");
let at = row(&texts, "Stroke:");
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(at)]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(painted(&texts, stroke) && !painted(&texts, general), "the Stroke row's sentence replaces it");
// Moving from row to row, across the spacing between them, never leaves the line empty.
let (from, to) = (row(&texts, "General:"), row(&texts, "Stroke:"));
let mut y = from.y;
while y <= to.y {
let (texts, _) = description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(egui::pos2(from.x, y))]);
assert!(painted(&texts, general) || painted(&texts, stroke), "a sentence shows with the pointer at y = {y}");
y += 1.0;
}
// Moving down onto the line keeps the sentence there to read.
let line = description_line_rects(&ctx).line;
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(line.center())]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(painted(&texts, stroke), "the sentence stays while the pointer is on the line: {texts:?}");
description_frame(&mut a, &ctx, vec![egui::Event::PointerGone]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(!painted(&texts, stroke), "the sentence goes with the pointer");
assert_eq!(preferences_window(&ctx).size(), size);
}
/// With nothing under the pointer, the row whose control has the keyboard focus is described, and a
/// screen reader gets the same sentence as that control's description.
#[test]
fn keyboard_focus_on_a_units_row_shows_its_description() {
let mut a = app();
open(&mut a, Some("Units"));
let ctx = egui::Context::default();
ctx.enable_accesskit();
crate::theme::install_fonts(&ctx);
description_frame(&mut a, &ctx, vec![]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
let general = descriptions::description("unitsGeneral").expect("Units › General has a sentence");
assert!(ctx.memory(|m| m.has_focus(search_edit_id())), "the search field has the focus on open");
assert!(!painted(&texts, general));
// Tab from the search field through the category list to the first Units control.
let mut shown = None;
for _ in 0..40 {
let (texts, described) = description_frame(&mut a, &ctx, key_press(egui::Key::Tab, egui::Modifiers::NONE));
if painted(&texts, general) {
shown = Some(described);
break;
}
}
let described = shown.expect("Tab reaches the General row and its sentence shows");
assert!(described.iter().any(|d| d == general), "the focused control carries the sentence: {described:?}");
}
/// The field list with the description line under it, and the description line, in the last frame.
struct DescriptionRects {
column: egui::Rect,
line: egui::Rect,
}
fn description_line_rects(ctx: &egui::Context) -> DescriptionRects {
let (column, line) =
ctx.data(|m| m.get_temp::<(egui::Rect, egui::Rect)>(egui::Id::unique("prefs-description-rects"))).expect("the description line is shown");
DescriptionRects { column, line }
}
/// A row with no sentence leaves the description line empty, also after another category's row
/// was described, and the dialog keeps its size.
#[test]
fn a_row_without_a_description_leaves_the_line_empty() {
let mut a = app();
open(&mut a, Some("Units"));
let ctx = egui::Context::default();
crate::theme::install_fonts(&ctx);
description_frame(&mut a, &ctx, vec![]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
let at = |texts: &[(String, egui::Rect)], label: &str| {
texts.iter().find(|(t, _)| t == label).map(|(_, r)| r.center()).unwrap_or_else(|| panic!("no `{label}` in {texts:?}"))
};
let general = descriptions::description("unitsGeneral").expect("Units › General has a sentence");
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(at(&texts, "General:"))]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(painted(&texts, general), "the General row's sentence shows: {texts:?}");
// Go to the General category and point at a row with no sentence.
let button = at(&texts, "General");
let press = |pressed| egui::Event::PointerButton { pos: button, button: egui::PointerButton::Primary, pressed, modifiers: Default::default() };
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(button), press(true), press(false)]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
let size = preferences_window(&ctx).size();
let line = description_line_rects(&ctx).line;
let empty = |texts: &[(String, egui::Rect)], when: &str| {
let drawn: Vec<_> = texts.iter().filter(|(_, r)| r.intersects(line)).collect();
assert!(drawn.is_empty(), "{when}: nothing is drawn on the line: {drawn:?}");
};
// The Units sentence does not follow the pointer onto the line of another category.
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(line.center())]);
let (after, _) = description_frame(&mut a, &ctx, vec![]);
empty(&after, "on the line after changing category");
assert_eq!(descriptions::description("keyboardIncrement"), None);
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(at(&texts, "Keyboard Increment:"))]);
let (after, _) = description_frame(&mut a, &ctx, vec![]);
empty(&after, "on Keyboard Increment");
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(line.center())]);
let (after, _) = description_frame(&mut a, &ctx, vec![]);
empty(&after, "on the line after Keyboard Increment");
assert_eq!(preferences_window(&ctx).size(), size);
}
/// A sentence shown when the dialog closed does not come back when it opens again with the
/// pointer away from the rows.
#[test]
fn opening_the_dialog_again_starts_with_an_empty_line() {
let mut a = app();
open(&mut a, Some("Units"));
let ctx = egui::Context::default();
crate::theme::install_fonts(&ctx);
description_frame(&mut a, &ctx, vec![]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
let general = descriptions::description("unitsGeneral").expect("Units › General has a sentence");
let at = texts.iter().find(|(t, _)| t == "General:").map(|(_, r)| r.center()).expect("the General row is shown");
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(at)]);
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(painted(&texts, general), "the General row's sentence shows: {texts:?}");
let line = description_line_rects(&ctx).line;
a.ui.dialog = None;
description_frame(&mut a, &ctx, vec![egui::Event::PointerMoved(line.center())]);
description_frame(&mut a, &ctx, vec![]);
open(&mut a, Some("Units"));
let (texts, _) = description_frame(&mut a, &ctx, vec![]);
assert!(!painted(&texts, general), "the old sentence does not come back: {texts:?}");
}
/// The field list and the description line under it together take the height the field list
/// alone took before the line, in every category, so the dialog keeps its size.
#[test]
fn the_description_line_keeps_the_fields_column_height() {
let mut a = app();
let ctx = egui::Context::default();
crate::theme::install_fonts(&ctx);
for cat in PREF_CATEGORIES {
open(&mut a, Some(*cat));
description_frame(&mut a, &ctx, vec![]);
description_frame(&mut a, &ctx, vec![]);
let kept = description_line_rects(&ctx);
assert!((kept.column.height() - 400.0).abs() < 0.01, "{cat}: the column is {} tall, not 400", kept.column.height());
assert!((kept.line.height() - DESCRIPTION_HEIGHT).abs() < 0.01, "{cat}: the line is {} tall", kept.line.height());
}
}
/// Each sentence describes a setting the dialog shows, and every complete catalog translates it
/// into at most the three lines the description line holds.
#[test]
fn every_description_names_a_setting_and_fits_in_every_language() {
let ctx = egui::Context::default();
crate::theme::install_fonts(&ctx);
let mut bad = vec![];
let mut out = ctx.run_ui(egui::RawInput::default(), |ui| {
for (key, sentence) in descriptions::DESCRIPTIONS {
if !settings().any(|s| s.key == *key) {
bad.push(format!("`{key}` is not a setting the dialog shows"));
}
for lang in crate::i18n::Lang::all() {
let text = crate::i18n::tr(lang, sentence);
if lang != crate::i18n::Lang::EN && text == *sentence {
bad.push(format!("{}: no row for {sentence:?}", lang.code()));
}
let mut job = egui::text::LayoutJob::simple(text.to_string(), egui::FontId::proportional(11.5), egui::Color32::WHITE, 530.0);
job.wrap.max_rows = 3;
let galley = ui.painter().layout_job(job);
if galley.elided || galley.size().y > DESCRIPTION_HEIGHT {
bad.push(format!("{}: {text:?} takes more than three lines", lang.code()));
}
}
}
});
out.textures_delta.clear();
assert!(bad.is_empty(), "{}", bad.join("\n"));
}