Before a script runs, `script.run` reads its preprocessor lines (`#` or
`//@` at the start of a line, outside strings and comments):
- `#include` and `//@include` put another file's text in place of the
line, looked for beside the including file, then in each
`#includepath` folder, then in each `JSINCLUDE` folder. A later
`#includepath` replaces the list.
- `#script` names the run unless `name` is given; `#target` takes any
value; `#strict off` is taken. `#strict on`, `#targetengine` and
`#engine` are refused as unsupported, and any other `#name` as
unknown.
`$.evalFile(path, timeout?)` runs a file in the same global environment
and returns its last value, `$.fileName` is the file being run and
`$.includePath` the include folders.
A script run from a file reads these files only in its folder and the
folders below it. Paths with a `..` name, links or junctions that lead
out, device names, streams and network paths are refused; a script
given as text reads none. A run reads at most 64 files 16 levels deep,
32 MiB of source in all and 1,024 paths looked up. An error in an
included or evaluated file is reported at that file's line and column,
and the report's new `file` field names it.
Docs: docs/mcp.md (script.run, Script Console), docs/target-app-parity.md.
A PDF, an EPS or .ai without ruler units, a raster image, a metafile, an
Affinity file or an importer plug-in's document opened (and reverted) in
points whatever the General unit was. They now open in the General unit,
as the reference app opens files that record no unit. Native, SVG and DXF
files and a .ai or EPS with %AI5_RulerUnits keep their own units. Only the
displayed units change, not the art.
A click with the Reshape tool on an anchor of a selected path makes it
the focal point, and a click on a segment adds an anchor there that
becomes the focal point. Shift-click adds an anchor or a point on a
segment to the focal points, or removes an anchor that is one already.
Each focal point shows a filled anchor square in a larger hollow one.
A drag from a focal point moves all of them; a drag from another point
moves that point alone, and Shift only keeps the drag's angle.
path.reshape takes the other focal points as focal: [[subpath,
anchor]...]. Anchors that are not direct-selected stay in place, and so
do the ends of an open path unless they are focal points. A selected
anchor between two focal points moves by the whole drag, and one
between a focal point and an anchor that stays takes u² (3 - 2u) of
the drag, as before. A closed subpath with every anchor selected moves
whole: a Reshape drag on a fully selected closed path, and path.reshape
without radius on a closed path selected whole or not selected, move
the whole path instead of a local area. With radius, only the grabbed
point's subpath changes, with the falloff as before.
- An anchor added on a segment of a partly selected path is selected,
and the selected anchors and segments after it keep their points.
- A focal pair that names no anchor is refused ("`focal` names [0, 7],
which is not an anchor of the path"), and so is focal with radius.
Docs: docs/mcp.md, docs/target-app-parity.md.
Break Link to Symbol on a selected group, and Delete Symbol with its
instances expanded, turned a hidden or locked instance into visible,
unlocked art. The art now keeps the instance's hidden and locked state,
as Object > Expand does, and Break Link leaves hidden or locked art out of
the selection.
Each artboard can carry a guide label: one of the layer colors or a
custom RGB. Guides that belong to an artboard draw in its label color,
and guides without an artboard, or on an artboard without a label, keep
the guide color from the preferences. Selected guides still draw in the
selection color.
- Artboard Options has a Guide Label row (None, the layer colors with
swatches, or Custom with a color swatch).
- artboard.new and artboard.setProps take guideLabel: null, a layer
color's name, or #rrggbb. Any other value is an error. The inspect
summary lists guideLabel when one is set.
- The native format saves the label and skips it when unset; a preset
index outside the layer colors reads as no label.
- artboard.setProps no longer adds an undo step when nothing changes.
Docs: docs/mcp.md, docs/target-app-parity.md.
The panel's note and the doc comment on ui.copyScriptConsole now say the
count of dropped and cut lines appears only when there are any, and the
returned lines count leaves that line out.
A copy of every Script Console line starts with the count of dropped and
cut lines only when there are any, and the returned lines count leaves
that line out. The end-line text is described without a code span that
ends in a space.
The text document reader set a type stroke's paint and weight but never
its cap, join or miter limit, so every stroked text object imported from
a .ai or EPS editing copy drew with a miter join at a limit of 10. Type
the file strokes with round joins, or with a miter limit of 4 or less,
drew long spikes at its sharp corners.
Keys 61, 62 and 64 of a run's character attributes (the run, its
character style, then the document defaults) are now read as the
stroke's cap (0 butt, 1 round, 2 projecting), join (0 miter, 1 round,
2 bevel) and miter limit, as PostScript numbers caps and joins. In the
users' files the page strokes type with exactly these settings. Other
values keep the defaults, a miter limit is capped at 500, and type
without a stroke keeps the defaults.
- ate.rs: Style reads the three keys and char_style passes them on,
with a unit test over defaults, character styles, run overrides,
hostile values and unstroked type.
- tests_native.rs: an imported story with round, bevel, default and
unstroked runs.
- docs/file-format-parity.md: revision row, status line, one line on
the mapping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #6435. An optional VectorCraft feature: the Preferences dialog's
Export Preferences... saves the applied preferences to a JSON file (the
web build downloads it), and Import Preferences... applies such a file and
shows the imported values. They run the new commands prefs.export {path?}
and prefs.import {path | data}.
The file holds every preference prefs.list lists and the eyedropper,
perspectiveWidget, pathfinder and glyphSnap groups, without the four
folder preferences and saved presets. prefs.import reads at most 1 MB and
checks every value first: another format, a newer version, an unknown
preference, a bad value or a folder preference is an error, and nothing
changes. It keeps the open document's units, records no undo step, and is
refused as a command.batch step. prefs.set now rejects a group value that
is not an object.
With sizeTileToArt on, pattern.options ignores width and height for sizing but
still rejects a value that is not a positive number, such as width 0, and
changes nothing.
File › Scripts now lists the .js and .jsx files of the Scripts folder next
to the preferences, each named after its file without the extension, with
each subfolder as a submenu, above Check Script… and Other Script…. The
help page describes this listing:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/install-and-run-scripts.html
Choosing a listed script runs it through script.run without the warning
Other Script… shows. script.listInstalled returns the same listing, and
ui.runInstalledScript {path} runs one entry.
VectorCraft's own rules: the folder is read off the UI thread when the
app starts, when its window becomes active and when the File menu of the
window's menu bar opens; only names are read; links, junctions, hidden
and system entries are left out and checked again before a run; one read
stops at 2,048 entries, 512 scripts, 128 subfolders, 4 levels or 250 ms
and the menu then notes that some scripts were not listed. Under an
automation read root, script.listInstalled and ui.menu.list leave out a
folder outside the root.
#1183 (LloydNicholson) also proposed a Scripts menu listing a folder.
With View > Pixel Preview on, the tools still snapped to Smart Guides
and showed their guides; only the Object Highlighting outline was
hidden. Work with Smart Guides says Smart Guides cannot be used while
Snap to Grid or Pixel Preview is on.
ViewInfo has a pixel_preview field, and Session::with_tool_cx turns
Smart Guides (and Snap to Glyph, which needs them) off in the tools'
context while it is set. VectorcraftApp::view_info passes View > Pixel
Preview. View > Smart Guides keeps its setting.
Docs: docs/target-app-parity.md.
A brick tileType or gridType with brickOffset omitted or null sets the
offset to 0.5. While sizeTileToArt is on, every pattern.options call
sizes the tile to the art plus hSpacing and vSpacing again and ignores
width and height, so a new hSpacing changes the tile's width.
Scripts write to a new Script Console with $.write(...values) and
$.writeln(...values), each value as String(value) gives it. vc.log
entries, a run's uncaught error as name:line:column: message, and a
start, end and report line for each run go there too. The report line
gives the run's time, host calls and slowest commands.
- The console keeps at most 2,048 lines and 1 MiB of text, dropping the
oldest and counting what it dropped. A line is cut at 4,096 bytes and
a script's name at 256 bytes, with a count of cut lines. Line feeds,
carriage returns and CRLF break lines; other control characters show
as Unicode Control Pictures.
- script.run's result and scriptReport gain runTimeMs, timingAvailable,
hostCallCounts, slowestCommands and the run's own console. A failed
run's report has them too.
- script.console and script.console.clear read and empty the console;
ui.copyScriptConsole {first?, last?} copies lines as the panel shows
them.
- The panel lays out only the rows in view, selects with click and
Shift-click, and has Clear, Copy Selected and Copy All. Output goes on
while it is closed, and Clear works during a run.
Docs: docs/mcp.md, docs/gaps.md, docs/roadmap.md,
docs/target-app-parity.md.
The pattern and Repeat paragraph in docs/mcp.md said that every omitted
or null param keeps its default. pattern.options and
object.repeat.options keep the pattern's or the repeat's current value
instead (except the brick offset, which a brick tileType or gridType
without brickOffset sets to 0.5), object.pattern.edit and
pattern.options fall back to the selected object's pattern and the
pattern being edited when name is omitted, and pattern.delete requires
name.
A linear dimension between two clicked points, or dragged out from a
segment, always measured the straight distance between its points and
drew its line parallel to them, so two points at different heights gave
only a slanted dimension. The linear dimensions help describes aligned,
horizontal and vertical linear dimensions: after the second click,
clicking again gives an aligned one and moving the pointer gives a
horizontal or vertical one.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html
While a linear dimension is being placed, the pointer's position sets
whether it is aligned, horizontal or vertical. The rule is VectorCraft's
own. With the pointer beside the two points (the nearest point of the
line through them lies between them) or on that line, the dimension is
aligned. Past either point, the line through the points and the
perpendicular through that point bound a quarter on each side of the
line. The quarter that holds the direction straight up or down gives
the horizontal distance, and the quarter that holds the direction
straight left or right gives the vertical distance. A click within
reach of the second point, or of where the pointer was for the second
click, places it aligned. Points on one horizontal or vertical line
give an aligned dimension. The dimension stays linked to the anchors it
measures.
- Dimension recipes carry an orientation (aligned by default; files
without it open as before). The line runs along the axis, and each
extension line runs from its point to it.
- dimension.create and dimension.update take orientation: aligned,
horizontal or vertical, for linear dimensions only. Any other value
is an error. A new orientation keeps the line on the side of the
points it was on, and an update that changes nothing records no
undo step.
- A horizontal or vertical dimension keeps its orientation when it or
the art it measures turns, and shows 0 when its points come into line
across its axis. A line that lay outside the points stays outside
them after a turn.
- The hint bar names the two-click placement.
Docs: docs/dimensions.md, the Evidence list in docs/target-app-parity.md.
A constrained move keeps only the snap correction along its direction, and that correction exists only when an edge ends within a quarter cell of a gridline. When no edge on those axes is that close, the move does not snap.
dotCooCoo