object.expand read `object`, `fill` and `stroke` with bool_or, `steps`
with f64_or and `gradient` with str_param, so a value of the wrong type
fell back to the default: "fill": "yes" expanded the fill, "steps": "16"
made 255 strips and "gradient": 3 made strips. They are now read with
switch_or, number_or and text_param, and such a value is an error that
names the param, before anything changes. Omitting a param or giving
null keeps its default.
- PDF 1.3 and 1.4 files, PDF/X-1a, PDF/X-3, PDF/X-4 and PDF/A-2b at
PDF 1.4 among them, write a page longer than 14,400 pt in points
again, now with a warning that apps that keep to the limit cut it to
200 in. Only a page that failed with
"PDF writer error: Limit(TooLargeFloat)" gets the new error: one
whose size or art needs a real number past 32,767, the most PDF 1.4
holds. Whole numbers are written as integers, so a page of whole
points past 32,767 is written as before.
- A page whose side is past 32,767 pt and not a whole number of points
is refused before the thumbnails are drawn and the transparency is
flattened.
- A PDF 1.5 file written as PDF 1.6 for a long page keeps PDF 1.5's
encryption (128-bit RC4), which the Save PDF dialog shows.
- A long page whose short side would be under 3 units at its UserUnit
(ISO 32000-1, Annex C.2), such as 50 m x 4 mm, gets a smaller
UserUnit that keeps the short side at 3 units, with a warning.
- The warnings give a page's size rounded up, as the error does.
A page of 14,400 pt or less is written as before. The new warning has
rows in every complete catalog. Docs: docs/mcp.md,
docs/target-app-parity.md and the document.exportPdf params.
edit.colorSettings set only the process-wide colour settings, so the RGB and
CMYK working spaces, intent and black point compensation went back to the
defaults at every start, although the profiles color.loadProfile loads are
kept (#2168, #2174). The engine now writes them to a settings file when they
change (Session::attach_color_settings), and the desktop app and
vectorcraft-cli keep that file as `Color Settings.json` next to the
preferences, attached right after the profile store so a saved working space
may be a loaded profile. Saved settings that can't be used (a profile that is
gone, a damaged or oversized file) leave the defaults with a log record, and
the next change writes over them. Nothing is read or written with
VECTORCRAFT_NO_PREFS.
A compound member copied or cut on its own now keeps the compound's
gradient fitted where it was: an unplaced gradient is pinned to the
compound's bounds, measured once per compound.
Clear that deletes every anchor or segment of every member of a compound
path now removes the compound too, as Cut does, instead of leaving an
empty compound in the layer.
The edit.copy and edit.clear descriptions, docs/mcp.md and the progress
line now say that selecting the compound copies it whole, that isolation
mode takes each member as itself, and how a compound of one and Paste in
Front with the copied member still selected behave.
A compound-path member selected on its own, whole with Direct Selection
or with Group Selection, is now copied as an ordinary path instead of
promoting the selection to its compound. Cut removes the same objects
Copy takes, so the other members stay a compound path, a compound of
one included. The compound is still taken whole when every member is
selected whole, or when the compound itself is selected.
A copied member or piece takes the compound's paint, opacity, blending
mode, opacity mask, pixel alignment and fill rule.
Tests that pinned the earlier rule from #786 now check the new one.
A command's result describes the document, so a plug-in without doc.read
gets -6 for every call, whether or not the id names a command. A run that
calls commands commits an edit still in progress first and prepares its
input again when that changed the document or the selection.
is_id_start now accepts the Other_ID_Start characters (U+1885, U+1886,
U+2118, U+212E, U+309B, U+309C), and is_id_part the Other_ID_Continue
characters (U+00B7, U+0387, U+1369 to U+1371, U+19DA, U+30FB, U+FF65),
as Unicode's ID_Start and ID_Continue properties and the ECMAScript
Names and Keywords clause define them. Letters, marks, digits and
connectors that are Pattern_Syntax are refused, which replaces the
U+2E2F special case. Escaped identifier characters go through the same
check. A supplementary letter right after a number is now the
"identifier starts immediately after numeric literal" error.
Letter categories still come from Unicode 16.0, so characters assigned
in later versions are not identifier characters yet.
Docs: docs/mcp.md, docs/target-app-parity.md.
docs/mcp.md and docs/target-app-parity.md said that a width or height
typed with Measure Type by Glyph Bounds on changes the font size by the
scale. The font size follows the vertical scale only: a width typed
alone, out of proportion, changes the horizontal scale and keeps the
font size, and a height typed alone changes the horizontal scale the
other way. A new test checks both.
Inflate's grid clipped every ring of the outline in each cell the
outline crosses and tested every edge for each cell's center, so its
work grew with the outline's points times the cells: a comb of 4,000
teeth (16,002 points) took 1.1 to 1.3 s and one of 16,000 teeth 8.8 to
9.1 s. Inflate now counts that work (the edge index's entries, the edges
its queries look at and the ring points its cells clip) and refuses the
shape with "The 3D surface is too complex; simplify the shape" once it
passes 268,435,456, VectorCraft's own value (about 0.65 s). The index
takes at most 16,777,216 entries (64 MiB). Each row's inside test reads
the sorted crossings of its line, and a cell clips only the rings whose
bounds meet it, so a 65,536-point circle inflates in 0.66 s instead of
1.0 to 1.2 s.
The effects test of a stroke past the limits uses 40,000 corners, so its
outline passes the 65,536 points a solid takes.
Docs: docs/three-d.md, docs/mcp.md.
A filter at plug-in API level 2 with the new `commands` permission names
the commands it may run in its manifest's `commandAllowlist` and runs
them with `env.vc_call`, reading each result with `env.vc_call_result`.
Each call runs through Session::execute on the run's document and sees
what earlier calls changed; the calls and the filter's output are one
undo step, and a run that fails, is cancelled or makes a failed call
leaves the documents, their history and the session state the commands
change as they were.
Commands that touch files, the clipboard, preferences, the view,
scripts, actions, plug-ins, open documents or the undo history are never
callable, and every other command must be listed as allowed in
cmd/plugin_call/reviewed.rs, so a new command is refused until placed.
Calls are capped at 1,000 a run, 8 MiB a call and 64 MiB a run, and each
costs instructions from the run's budget. plugin.install refuses a
manifest that lists a refused command and reports unknown ids;
plugin.inspect lists both, and the approval dialog lists the commands.
Refs #2186
Each Extrude & Bevel and Inflate solid now takes up to 65,536 outline
points (was 2,048) and 163,840 faces (was 32,768), VectorCraft's own
limits, as Revolve's. Before any point is sampled, the outline's lines
and curves are counted with each curve's tolerance pieces, and the faces
the walls, bevels and caps (Extrude) or the sides (Inflate) need. When
they do not fit, every curve takes fewer pieces, down to 4; a shape that
does not fit at 4 is refused with the existing surface error before any
face is built. The subpath count is capped at the point limit too. The
error texts are unchanged.
A closed path of 2,000 curves now extrudes with a bevel and inflates,
and paths of 5,000 and 10,000 curves build at the default settings.
Docs: docs/three-d.md, docs/mcp.md, docs/target-app-parity.md.
Done ran text.spelling.removeWord and text.spelling.addWord one word at a
time, each saving the file, so a save that failed after a delete was saved
left that word deleted even after Cancel. text.spelling.editDictionary
{remove, add} makes every change, saves once and takes all of them back when
the save fails; Done runs it once.
Direct Selection showed and dragged the anchors of type on a path's path
(#3980) but not their direction handles: handle_anchors read only a
path's own data, and the canvas draws only a path's handles.
- text.setPathHandle moves a handle of type on a path's path, in
document space, as path.setHandle moves a path's; the brackets keep
their fractions and the text reflows. One undo step.
- Direct Selection draws the handles of selected type on a path and
drags them with it (Alt: one side, Shift: 45 degree steps).
The custom dictionary's words in a list, with an Entry field and Add, Delete
and Change, applied on Done, as the public Check and correct spelling page
describes it. The menu item moves from the Spelling submenu to the Edit menu,
where the page puts it.
Each command a script runs keeps a savepoint of the state it may need
to put back if it fails. The savepoint cloned every open document's
whole undo history, so a script that made N edits did O(N^2) work.
- The savepoint now clones each document's state without its history
and keeps a mark: the newest undo and redo steps and the serials of
the steps under them. Until the command ends, the history trims no
step, and a new step sets the redo steps aside instead of dropping
them. A failed command truncates both stacks back to the mark.
- file.close, file.closeAll, document.close and file.revert still keep
a whole copy, since they remove the history or the document.
- When a failed command removed or changed a step under the newest
one, the history cannot be put back exactly, and the run stops with
an error; its rollback restores the documents as they were before
the run.
- run_guarded no longer copies the histories during a script's run,
and a committed run moves the histories from before it back instead
of copying them.
- Symbol editing mode shares its saved redo steps between copies of a
document's state.
- A script cannot run edit.clearHistory. A run keeps each document's
undo steps from before it, so the command reported a clear that the
commit then undid.
Extrude & Bevel, Extrude & Bevel (Classic), Inflate, Rotate and Revolve
now apply to a clipping group (or a layer with a clipping mask), a blend
or a symbol instance, alone or inside a group or layer. The solid is
built from the art the object shows: the art inside the clipping path
(fills cut to the clip, strokes as their outlines cut to the clip), the
blend's keys and steps, and the symbol's art where the instance places
it. Validation, the canvas, bounds, Expand Appearance, Rasterize and
assets.add3D read the same art from the document.
An image is refused, alone or in a group, with a message to trace it
first with Object > Image Trace > Make. A missing symbol, a symbol that
holds an instance of itself, art nested more than 64 levels deep and
more than 4,096 objects are refused. The refusal messages change, and
their rows change in every catalog.
Docs: docs/three-d.md, docs/revolve.md, docs/mcp.md,
docs/target-app-parity.md.
A right-click on type has a Spelling submenu with Auto Spell Check, as the
public Check and correct spelling page describes. A submenu that holds only
toggles shows their check marks, even in the context menu.
With Measure Type by Glyph Bounds on, point type is measured by its
glyph outlines and its underline and strikethrough bars, as the canvas
draws them. A typed W or H gives what is drawn that size, and underlined
or struck-through spaces are measured by their bars instead of the em
box.
The texts now say that each point type object selected as an object
(not inside a selected group) is measured this way, that moved type
snaps by its ink box, and which Arrange Tools commands follow the
option: Swap Objects, Replace with Top Object, Set Size of Each and
Sort Objects. Arrange in Grid and Group Overlapping Objects keep
measuring visual bounds.
A page with a side longer than 14,400 pt (200 in, ISO 32000-1 Annex C.2)
keeps its size only with a UserUnit, which PDF 1.6 added. Exports now
report such pages and handle the versions without a UserUnit:
- Each such page adds a warning with its size and its UserUnit. Apps
that ignore UserUnit show the page that many times smaller.
- A PDF 1.5 file with such a page is written as PDF 1.6, with a warning.
- PDF 1.3 and 1.4 files, PDF/X-1a and PDF/X-3 among them, are refused
with an error that names the page and the limit, instead of
"PDF writer error: Limit(TooLargeFloat)".
- PDF/X-4 files at PDF 1.5 or 1.6 keep the page in points, with a
warning that apps that keep to the limit cut it to 200 in.
The warnings and the error have rows in every complete catalog. Docs:
docs/mcp.md, docs/target-app-parity.md and the document.exportPdf
params.
BFlat