The theme's colors went into egui's style for the current system theme
only. When the system's light or dark setting differed from it or
changed while the app ran, egui switched to its other style, which held
egui's defaults: tool tips became a white box with gray text, or with
the theme's light text. Applying a brightness now sets egui's theme to
match, starting from the current style so settings such as the tool tip
delay carry over.
Dropping rows with neither a label nor a value read the data padded to
the widest row, so a dropped row wider than the rest (`,,`) left every
kept row one blank cell wider. The graph then had an extra blank series,
and a right-axis assignment to that index was kept. Each kept row now
keeps its own width. This applies to graph.setData and to a graph
variable's data set.
With the clipping path of a clip group or a clipping layer selected, or a
member of a compound path that is the clipping path, Paste in Back put the
clipboard's objects below it. The bottom pasted object then became the
clipping path. With nothing selected in a clipping layer, Paste in Back did
the same at the bottom of the layer.
Paste in Back now puts the objects right above the clipping path, as Send to
Back keeps art above it.
Applying a data set wrote a text value into the bound frame only, and the
thread's reflow then joined it with the other frames' old text. The art no
longer matched the row it had just applied, a captured row applied back lost
text, and a value bound to a later frame deleted the rest of the story.
- A text value bound to any frame of threaded text replaces the whole story,
which then flows through the frames again. `overflow` names the story's
last frame.
- Capture Data Set, Update Data Set and the Variables panel's match check
read such a frame as the whole story, frames joined in thread order.
- When any frame of the story is locked, the text value is skipped and
counted in `skipped`, and the story is not read.
- Two text variables bound in one story apply in definition order, as for
two on one object: the one defined last wins.
Docs: docs/mcp.md.
variable.lock's params text and the doc comment on Variables::locked said every
dataset command still runs while the variables are locked. dataset.import is
refused when its header would define a variable; both texts now say so, as
docs/mcp.md and dataset.import's params already do.
Choosing a data set gave a graph variable's CSV to the graph without the
two steps graph.setData takes after new data: rows with neither a label
nor a value were kept and drawn as empty slots, and a right-axis series
the new data no longer had stayed assigned, so a series added by a later
row started on the right axis. The data set now goes through the same
steps.
variable.rename and dataset.rename checked whether newName was taken before
checking that name exists, so renaming a missing name onto a taken one said
the new name already exists. Both now report the missing name first.
Version 7 files write each palette swatch as its paint and `Pc`, with no
name. The reader only kept a swatch with a name before `Pc`, so such a
palette gave no swatches and the document got the default set.
A swatch without a name is now named by its spot color, gradient or
pattern, or by its values in the format the swatch import already uses
for unnamed colors ("Gray K=25", "C=25 M=0 Y=0 K=0"). `Pn` and a `Pc`
with no paint before it add nothing. Named swatches keep their names.
An operator the reader does not know, or a `Pg`, now ends the paint
before it, so a later `(name) Pc` no longer takes that paint. The
swatch limit is kept with a running count instead of summing every
group at each `Pc`.
With a member of a compound path selected, Paste in Front and Paste in Back
put the clipboard's objects next to that member, inside the compound path,
whatever they were. A pasted group, compound path or type object then sat
inside a compound path, which holds only paths. The model-based test
`random_command_sequences` stops on this with "compound #N has a non-path
child".
When the clipboard holds anything other than paths, the objects now go
right above or below the compound path. Paths still go next to the member,
inside the compound path.
The color sliders now mark the row they edit with `model: "new"`
instead of a dialog-wide flag, and `recolor.apply` reads a row's own
`model` before the command's. Rows the sliders did not edit keep each
color's model, so with RGB art and a CMYK color group, a slider edit of
one row no longer turns the other rows' art CMYK. Another edit of the
row's new color, Reset and rows reduced again remove the mark, and
`recolor.randomize` moves it with its new color.
* ci: run the desktop printing check through the shared gate
print.yml ran its own Windows job, which the CI workflow rules phase out, and each PR saved its
own ~1.3 GB cache. The same commands now run through craft-common-actions' gate.yml on
windows-2022, without craft-fonts, nextest or the wasm target as before. The gate never saves
from a pull request; a manual run on main seeds the cache. storytold/craft-common-actions#118.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ci: call the shared gate at main
storytold/craft-common-actions#119 is merged, so main's gate takes an empty packages list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A dialog opened on a color group or on loose colors no longer offers Tint for a spot color of
the library: OK saves only the new colors, so a tint set there was lost. The row shows the
process modes instead.
The Tint rail and a tinted row's new color chip show a Lab spot color as art linked to it shows
it: the working-CMYK equivalent while the Spot Colors options use CMYK values, with its inks
scaled.
Changing the color count, a Preserve option or Limit to Library rebuilds the rows from the art's colors, which discards a slider edit. The dialog now also forgets that edit, so preview and OK give the art the rebuilt rows' colors in the art's own model instead of the rows' models.
A wheel drag or a harmony rule on the Edit tab now removes a row's tint
when it gives the row another new color, as the color sliders, the hex
field and the Color Picker already do. With Limit to Library, an edit
that snaps back to the row's own color keeps the tint.
recolor.randomize moves each row's tint with its new color when it
shuffles the order, and removes the tint from a color that saturation
and brightness changes.
Reset now also clears the slider edit, so the preview and OK keep each
color's model again instead of sending model "new". Changing the Colors
count, a Preserve flag or Limit to Library, or pressing Reset, with the
preview on reduced the previewed colors, so the rows no longer matched
the art; the preview is now rolled back before the colors are reduced.
The Tint mode follows the swatch recolor.apply links: the first library
swatch of the library color nearest the row's new color, shown as Tint
only when that swatch is a spot color.
The Assign tab gets a Color Mode menu (HSB, RGB, CMYK, Lab, and Tint when
the row's new color is a spot color of the Limit to Library library) and
its sliders under the rows. They edit the first selected row's new color
and are disabled with no row selected. Once they have edited a color in a
mode, the preview and OK send recolor.apply with model "new", so the art
takes the color in that mode.
recolor.apply rows take an optional tint (percent, default 100): art linked
to the row's global or spot library swatch takes that share of its tint.
recolor.randomize keeps a row's tint.
Object > Plug-ins > Color Effects > Find Nearest Swatch... picks a
library (the document's swatches, a built-in library, or a library or
colour book the user saved or loaded) and Fill and Stroke, and lists
each colour of the selection with its three closest swatches and their
CIEDE2000 difference. Apply gives each colour its nearest swatch as one
undo step.
- addon.color.nearestSwatch (a query): the closest swatches of a
library to each colour of the selection's fills and strokes (solid
colours and gradient stops, inside groups and type), or to a colour
given, with deltaE; count 1..50.
- addon.color.applyNearestSwatch: recolours those paints (and gradient
meshes) to their nearest swatch; global and spot swatches link, and a
library's swatches the colours take are added to the document first
(as swatch.library.add adds them), so a spot colour stays spot.
- The library picker Image Trace's Document Library uses moves to the
Swatches panel module and is shared.
- No colour book data ships: only libraries VectorCraft computes or the
user loads are searched.
Each format's copy options are given in full, so no remembered option
applies: PDF and .ai copies write every page (range all), SVG copies
the art of every artboard in one file (useArtboards false), native,
.ai and EPS copies include linked files' data.
Each copy is saved with images embedded and artboards together, so a
document last saved with linked SVG images writes no image files beside
its copy; any other file a save reports is reserved for the copies still
to come.
A Perceptual linear or radial gradient that mixes spot colors with each
other or with CMYK or gray stops was written as an image in process
colors. It is now written as a DeviceN shading of its inks, with the
stops on its Perceptual curve: at each one, the inks of the two stops on
either side are mixed at the weight where the two colors mixed in
display RGB have the OKLab lightness of the color on the curve.
- Gradient::ink_mixes gives the curve's stops as weights between stops,
under the same 4,096-stop limit as ink_tints.
- Perceptual gradients that mix a spot color with RGB or Lab stops,
dithered fills and freeform gradients stay images, and the warning
now names those cases.
Baseline shift now moves a character in the line's frame, outside
Character Rotation, so a positive shift moves a character up from its
line at any rotation, and the character turns about its shifted pen
position. The Touch Type tool splits a drag into its part along the line
(kerning) and its part up from the line (baseline shift) at every
rotation; before, within about 6 degrees of a quarter turn it dropped
the cross-line part.
Characters that already combine a rotation with a baseline shift are
drawn in a new position. Their stored values do not change.
- text: glyph transform order, PositionedGlyph::pivot (the turning
point), tab leaders in the same order
- tools: Touch Type splits drags against the line's up axis and measures
rotate-handle turns about the shifted pen position
- engine: text.touchType description; dy is up from the line
- docs: mcp.md Touch Type paragraph, target-app-parity.md progress line
The Character panel's All Caps, Underline and Strikethrough buttons, and
its menu's All Caps, Underline, Strikethrough, Proportional Metrics,
Tate-chu-yoko and No Break, read the first selected character's style.
With only some characters marked they could show on, and choosing one
turned the attribute off for every character. They now show on only
when every selected character has the attribute, and a click on a mixed
selection turns it on for all, as Small Caps and Standard Vertical Roman
Alignment do. type.underline (Cmd+Shift+U) underlines a mixed selection
the same way. The Character Alignment and Digits submenus check no item
while the selected characters differ.
text.setFormat ignored a value that was not true or false for underline,
strikethrough, allCaps, proportionalMetrics, tateChuYoko,
standardVerticalRoman, noBreak, hyphenate, hyphenateCapitalized and
romanHangingPunctuation. It now refuses it with "`<key>` must be true or
false" and changes nothing, as text.setRangeStyle does.
An envelope in a .ai's editing data opened as its distorted art, with
its mesh and contents dropped. It now opens as a live envelope of its
contents: a warp with its style, bend, distortions and orientation, a
mesh with its points and handles, or a top object with its outline,
with Envelope Options, Fidelity and Edit Contents.
The envelope replaces its drawn art only when VectorCraft draws it like
that art, with a budget so that live envelopes don't make the file open
from its PDF part. When the layers still differ too much from the page,
the drawn art is put back. An envelope that can't be read, or that
draws differently, keeps its drawn art with a note. Envelopes of type
keep their drawn art and hidden type as before.
dotCooCoo