bfchar and bfrange mappings are kept in the CMap and carried over by
usecmap. A code mapped to a character code draws that code in the base font
usefont named; a code mapped to a glyph name draws that glyph.
Each CID-keyed font in a FontSet's CFF data is defined as a CIDFont named by
the CFF Name INDEX, with its glyphs found by CID through the charset and
FDSelect, so a composefont over it draws its type.
Between each two characters the kshow procedure runs with the two codes and
the current point after the first, in any font, not only Type 3 fonts. Where
it moves the current point the next character follows, kept as tracking.
An embedded Type 1 font's eexec part is decrypted and its charstrings read,
so its glyphs and widths are used instead of the installed or fallback
font's. Codes are decoded through the font's Encoding, so fonts that place
glyphs at low codes no longer lose their type.
Adds composefont, the CIDInit and FontSetInit procedure sets and the CMap
operators, so EPS with CID-keyed fonts (as pdftops -level3 writes) opens.
Type 0 fonts with FMapType 9 decode their codes through the CMap's codespace
ranges and CID mappings, and the Identity CMaps are predefined.
A plain Type 42 font now maps each code to its character through its glyph
names, or through the glyph its CharStrings give it in the font's own
character map or post names, instead of reading the code as Latin-1. The
font's own widths move the current point, charpath outlines its glyphs, and
the show operators' spacing and the embedded widths are kept on live type as
tracking. Type shown under nulldevice no longer appears.
Only a Stroke Style filter's widths written as one centered array come in as the drawn look. A Stroke Offset stroke and widths written for each side stay live with their profile.
docs/file-format-parity.md held 35 copies of the paragraph under
"Illustrator's private editing data" after #6202 left one, each copy
carrying a different set of the changes merged since. The section now
holds one copy with every clause from the others: placed PDF and .ai
pages as placed documents, Bas Relief among the single-effect art
styles, Bas Relief's settings block in type's art style, the fill a
clipping path keeps with its exceptions, paths with an Art brush, the
spot colors in brush art, symbols defined before the art styles
section, the Type on a Path options, and the artboards the type of a
PDF's later pages goes to.
Align to Path moved the whole line by the largest ascent and descent
among its characters. Each character now moves by its own font, size
and vertical scale. Ascender runs the top of the font's em box along
the path: the ideographic em box that the font's BASE table gives, or
in a Chinese, Japanese or Korean font the one that its typographic or
hhea box, a one-em box-drawing cross or its ideographs give; else an
em box centered on the cap height. Descender runs the bottom of the font's
bounding box along the path, and Center runs a line at half the height
of the top of the font's H along it. In vertical type, Ascender and
Descender move the characters half an em, and Center leaves them on
the path.
Existing documents with Align to Path set to Ascender, Descender or
Center lay their type out at a new distance from the path.
A composite (Type 0) font with the 8/8 mapping picks a descendant font
and a code in it with each pair of bytes (PLRM 3rd ed., 5.10). The reader
set its strings as type in a font of the composite font's name, the
bytes read as Latin-1 and at a thousand times the size, so EPS from
pdftops of a PDF with embedded TrueType fonts showed nothing, or one
black shape, where its type was.
Characters now go to their descendants: a Type 42 font's glyphs are drawn
from the TrueType outlines its sfnts strings carry (Adobe Technical Note
5012), by the glyph index CharStrings gives their names, spaced by their
own widths or the show operator's numbers; charpath and stringwidth read
them too. A Type 3 descendant runs its procedures, and a descendant found
by name sets its character as type at the composite font's size.
A dictionary's state starts afresh, with a black fill. Mask art is written
going on from the paint before the mask's dictionary, which the writer leaves
out when it doesn't change, so a mask rectangle with no colour of its own
came in black and hid the white letters it masks. Mask art now starts from
the paint (fill, stroke, line style, fill rule, overprint) before the
dictionaries it is in; lock, visibility and transparency still start afresh.
A pattern's definition (in either form) and a brush's art were read
without the file's art styles, so an object there with a style came in
as the look it draws, with a "drawn look" note, while the same object on
a layer or in a symbol came in as itself with its effects live. The
three definition readers now take the art styles as the symbol reader
does, and an object in a pattern's art with a style in the file's style
list keeps that graphic style's id.
An art styles section inside a symbol's, a pattern's or a brush's art
is now skipped, so it no longer replaces the file's own art styles.
The editing-data writer wrote a run's key 35 only for Tate-chu-yoko (3).
Type with Standard Vertical Roman Alignment, on or off, was saved with no
key, so the setting was lost from the editing data. Every run now carries
key 35 in the form the reader reads it (crates/eps/src/import/ate.rs,
Texts::style, lines 669-670): 1 when the setting is on, 2 when it is off
and 3 for Tate-chu-yoko. The document's defaults and the normal character
style carry 1.
Key 35 holds one value, so a run with both Tate-chu-yoko and the setting
is written as Tate-chu-yoko, and the save reports the type attributes
warning for it.
- writer/texts.rs: baseline_direction() gives each run's value;
normal_char() writes 1; loses() and TYPE_ATTRIBUTES name the setting.
- tests.rs: a vertical and a horizontal object with the setting on, off
and Tate-chu-yoko come back the same through the reader, lay out as
before, and carry the expected keys; a run with both is reported.
- docs/file-format-parity.md: the .ai save section lists the written
values.
The modern type reader read key 35 of a character style only for
Tate-chu-yoko (3). A run whose key 35 is 1 (Standard), in the run, its
character style or the document's defaults, now opens with Standard
Vertical Roman Alignment on, so its half-width characters stand upright
in vertical type. Horizontal type keeps the mark with no change to its
layout. A value of 2 (rotated), 3, any other value and no key at all
leave it off, VectorCraft's default.
- ate.rs: Style reads the flag and passes it to CharStyle, with a unit
test over defaults, character styles, run overrides and bad values.
- tests_native.rs: a vertical and a horizontal story with Standard,
rotated and unset runs; the test of values the reader ignores also
checks the flag.
- import_fuzz.rs: the vertical fixture also checks the flag.
- docs/file-format-parity.md: one line on the mapping.
docs/file-format-parity.md held 17 copies of the paragraph under
"Illustrator's private editing data", and they disagreed about what
import reads. The section now holds one copy with every clause from
the others: a filled clipping path keeps its fill, with the exceptions
for multi-layer masks and compound clipping paths whose subpaths paint
differently; paths with an Art brush; the spot colors in brush art and
their limits; symbols defined before the art styles section; and the
Type on a Path options of type on a path. Each clause was checked
against crates/eps/src/import.
Don Omondi