A File menu opening or a failed ui.runInstalledScript while a read of the
Scripts folder was under way was dropped, so a script added after that
read passed the folder stayed unlisted until the next window activation
or File menu opening. The request is now kept and the next frame starts
the read once the running one is taken in.
File › Scripts now lists the .js and .jsx files of the Scripts folder next
to the preferences, each named after its file without the extension, with
each subfolder as a submenu, above Check Script… and Other Script…. The
help page describes this listing:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/install-and-run-scripts.html
Choosing a listed script runs it through script.run without the warning
Other Script… shows. script.listInstalled returns the same listing, and
ui.runInstalledScript {path} runs one entry.
VectorCraft's own rules: the folder is read off the UI thread when the
app starts, when its window becomes active and when the File menu of the
window's menu bar opens; only names are read; links, junctions, hidden
and system entries are left out and checked again before a run; one read
stops at 2,048 entries, 512 scripts, 128 subfolders, 4 levels or 250 ms
and the menu then notes that some scripts were not listed. Under an
automation read root, script.listInstalled and ui.menu.list leave out a
folder outside the root.
#1183 (LloydNicholson) also proposed a Scripts menu listing a folder.
With View > Pixel Preview on, the tools still snapped to Smart Guides
and showed their guides; only the Object Highlighting outline was
hidden. Work with Smart Guides says Smart Guides cannot be used while
Snap to Grid or Pixel Preview is on.
ViewInfo has a pixel_preview field, and Session::with_tool_cx turns
Smart Guides (and Snap to Glyph, which needs them) off in the tools'
context while it is set. VectorcraftApp::view_info passes View > Pixel
Preview. View > Smart Guides keeps its setting.
Docs: docs/target-app-parity.md.
The canvas key did not change when a plug-in was installed, replaced or
removed, so the canvas kept showing the frame drawn with the old plug-in,
and a pan by whole pixels copied that frame's pixels next to strips drawn
with the new one.
The key now carries the plug-in revision of the last install or removal
after which the document draws a plug-in effect, in its layers, in a
symbol's or pattern's art, or in a brush's art. The canvas looks through a
document once after each install or removal; a document without a plug-in
effect keeps its key.
A linear dimension between two clicked points, or dragged out from a
segment, always measured the straight distance between its points and
drew its line parallel to them, so two points at different heights gave
only a slanted dimension. The linear dimensions help describes aligned,
horizontal and vertical linear dimensions: after the second click,
clicking again gives an aligned one and moving the pointer gives a
horizontal or vertical one.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html
While a linear dimension is being placed, the pointer's position sets
whether it is aligned, horizontal or vertical. The rule is VectorCraft's
own. With the pointer beside the two points (the nearest point of the
line through them lies between them) or on that line, the dimension is
aligned. Past either point, the line through the points and the
perpendicular through that point bound a quarter on each side of the
line. The quarter that holds the direction straight up or down gives
the horizontal distance, and the quarter that holds the direction
straight left or right gives the vertical distance. A click within
reach of the second point, or of where the pointer was for the second
click, places it aligned. Points on one horizontal or vertical line
give an aligned dimension. The dimension stays linked to the anchors it
measures.
- Dimension recipes carry an orientation (aligned by default; files
without it open as before). The line runs along the axis, and each
extension line runs from its point to it.
- dimension.create and dimension.update take orientation: aligned,
horizontal or vertical, for linear dimensions only. Any other value
is an error. A new orientation keeps the line on the side of the
points it was on, and an update that changes nothing records no
undo step.
- A horizontal or vertical dimension keeps its orientation when it or
the art it measures turns, and shows 0 when its points come into line
across its axis. A line that lay outside the points stays outside
them after a turn.
- The hint bar names the two-click placement.
Docs: docs/dimensions.md, the Evidence list in docs/target-app-parity.md.
A constrained move keeps only the snap correction along its direction, and that correction exists only when an edge ends within a quarter cell of a gridline. When no edge on those axes is that close, the move does not snap.
Preferences > Guides & Grid gets Artboard Guides with Cmd/Ctrl + Ruler
Drag (cmdRulerDragArtboardGuides), off by default. With it on, Cmd/Ctrl
held when a drag leaves a ruler makes a guide of the active artboard,
with any tool but the Artboard tool; with the Artboard tool it makes a
canvas guide instead. The key is read when the drag starts, so letting
it go during the drag keeps the kind of guide. Such a guide shows and is
made only where it lies within the active artboard; released elsewhere,
it makes no guide and no undo step. A ruler click still makes no guide.
This is VectorCraft's own option. The documented way to limit a guide
to one artboard, dragging it out with the Artboard tool, is unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Reshape drag on an open path moved only the anchors within half the
diagonal of the path's bounding box, measured along the path. On a
zigzag, a wave or a spiral that is one or two anchors, so dragging an
end moved the end and left the rest of the path where it was (#2723).
path.reshape now stretches an open path from the grabbed point to both
ends. The end anchors stay in place. Each anchor between an end and the
grabbed point takes u² (3 - 2u) of the drag, where u is its distance
from that end along the control polygon divided by the grabbed point's
distance from that end. A handle takes the share on the tangent line of
that curve at its anchor, so the handles of a smooth anchor stay in
line with it. A handle that is long beside the span takes a share below
0 or above 1.
This changes the default for every caller that leaves radius out on an
open path. A closed path still moves the anchors within half the
diagonal of its bounding box, and a call that gives radius uses that
radius on open and closed paths.
- A negative radius is refused ("`radius` must be 0 or more"). It gave
anchors beyond the radius a share above 1.
- A drag of no length on an anchor no longer records an undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
When the first object of a perspective move was not yet in perspective
and a later one was attached deeper on the same plane, Snap to Grid and
Shift read the shared offset at the later object's depth and left the
first object out of the joint bounds. The first object then moved by
that offset instead of the one under the pointer at its own depth.
The move now reads Snap to Grid and Shift with the objects that are not
in perspective attached to the active plane, as the move attaches them,
so the result matches attaching them first and then moving.
Part of #6435.
Reset Preferences in the Preferences dialog now opens a question over
the dialog (`resetPreferences`). Cancel or Escape goes back to
Preferences as it was, with its edits, category and search kept. OK goes
back with every preference at its default value; OK in Preferences
applies them and Cancel there discards them, as before. `prefs.reset`
still resets at once.
Docs: docs/mcp.md, docs/target-app-parity.md.
A constrained move keeps only the snap correction along its direction: a horizontal or vertical move lands the edge on its own axis, and a 45° move lands the edge on the axis whose nonzero correction is smaller. The per-axis rule now applies to unconstrained moves only.
text.setStyle now reads `size` and `tracking` with `number_given` and
`length_given` from pathops.rs instead of its own copies.
Both helpers read a string only when all of it is a number, or for
`length_given` a length with a unit (`"5 mm"`). Before, `"20abc"` read
as 20, so `text.setStyle` applied a 20 pt size and Offset Path a 10 pt
offset for `"10abc"`. Such a string is now refused with "`size` must be
a number, not \"20abc\"" and the document is left as it was.
visit_node_colors visits the fill and stroke paints a dynamic symbol
instance keeps for objects of its art (symbol_overrides). Before, print
separations, Separations Preview and document color conversion left
those colors as they were, so an instance's own fill printed and
previewed unseparated.
docs/mcp.md and docs/target-app-parity.md now state that a move in
perspective snaps an edge of the joint bounds only when it ends within
a quarter cell of a gridline (PerspectiveGrid::snap_offset), and that a
move perpendicular to the plane does not snap (perspective.move skips
snap_fix when perpendicular is true).
Two PDF export passages in docs/target-app-parity.md said a gradient
that mixes a spot color with RGB or Lab stops is always written without
the spot ink, or as an image when Perceptual. A CMYK document, or an
export that converts colors to a CMYK destination profile, writes those
stops in CMYK first, so the gradient is a DeviceN shading that keeps the
ink; an RGB destination profile keeps them in RGB. The passages now say
so, as docs/mcp.md and the paint.editGradient params text already do.
A new test checks the Classic case in an RGB document, a CMYK document,
with a CMYK destination and with an RGB destination.
Batch with Override Export compares output names without case, so
`a.svg` and `sub/A.svg` get the Export for Screens folders `a` and
`A-2`. A source whose name without its extension is empty (` .svg`)
gets the folder `file`, and a later `file.svg` gets `file-2`. Two tests
cover these cases.
Records why rust:S4790 (`crates/pdf/src/encrypt.rs`) stays, like wordcraft#6187 did for SHA-1 in ODT. MD5 is the key derivation of the PDF standard security handler revisions 2-4 (ISO 32000-1 §7.6.3.3), which PDF 1.3-1.6 encryption uses. It's needed to read those files and to write the compatibility the user picks. The default, 256-bit AES (revision 6), hashes with SHA-2.
Reset Preferences put Points in Units > General, and OK sent it to
prefs.set, which also set the open document's units as an undo step.
OK after Reset now resets the General preference and leaves the
document's units as they are. Choosing a General unit after Reset, in
the dialog or with ui.dialog.set, still sets the document's units.
prefs.set takes documentUnits (default true); false makes unitsGeneral
set only the preference. Docs: params text, docs/mcp.md.
Part of #6435
Shaping split a cluster wherever two characters' styles differed, so
setting Standard Vertical Roman Alignment or a tate-chu-yoko offset on the
f of "fi" in horizontal type broke the ligature. Horizontal type does not
read those settings, so they no longer split a cluster there. Vertical
type still shapes such characters apart.
object.repeat.radial, object.repeat.grid, object.repeat.mirror and
object.repeat.options, and object.pattern.make, object.pattern.edit,
object.pattern.saveCopy, pattern.options and pattern.delete, read their
params with helpers that fell back to the default for a value of the
wrong type: "instances": "8" made 8 instances whatever the text said,
"rows": "2" made 3 rows, "edit": "false" entered pattern editing mode,
and a `name` that was not a string edited the selected object's pattern.
Each such value is now an error naming the param, and the document, the
selection and the undo history stay as they were. An omitted or null
param keeps its default.
- pattern.options refuses an `overlap` that is not an object, and an
`overlap.h` other than left or right or an `overlap.v` other than top
or bottom.
- object.repeat.options refuses a `center` that is not [x, y].
- object.repeat.radial refuses a negative `radius`; it used the
automatic radius before.
- object.repeat.grid reads `rows` and `cols` as object.repeat.options
does: a fraction is cut to a whole number, within 1 to 500.
- object.repeat.options applies `brickOffset` given without `gridType`
to a brick grid, and its params text lists the key.
Docs: docs/mcp.md.
After a Scissors cut (`path.split`) the whole path stayed selected: both
pieces of an open path, or the opened path of a closed one. A Direct
Selection drag from the cut then moved every anchor, so an ellipse cut
at an anchor could not be pulled open by dragging its end.
- `path.split` selects the first anchor of the piece after the cut and
nothing else, as `path.cutAtAnchors` does: anchor 0 of an opened
closed subpath, of the new path when an open path becomes two, or of
the subpath added to a path of several subpaths.
- A Direct Selection press on anchors of a selected path that lie on top
of each other takes the selected one. It took the first in path order,
which in a path of several subpaths was the unselected end.
Docs: docs/mcp.md, docs/target-app-parity.md, the `path.split` params
text.
`text.setStyle` read `font`, `style` and `justify` with `str_param`,
`size` with `len_param` and `tracking` with `num_param`, so a value of
the wrong type was skipped: `{"size": 30, "style": ["Bold"]}` set the
size and ignored the style, and `{"font": "Inter", "size": [12]}` set
the font and ignored the size. `features` dropped an entry that was not
a string and applied the rest. `text.setRangeStyle` skipped a `font` or
`style` that was not a string, `type.ruby` skipped such a `text`,
`position` or `align`, and `text.setPathHandle` moved the out handle
for any `which` other than "in".
Each of these now returns an error that names the param, before the
command edits the document. Omitting a param or giving null keeps its
default. `size` and `leading` still take a length with a unit
("12 pt", "5 mm"), and `tracking` still takes a number written as a
string ("20").
- `text.setStyle`: `font`, `style`, `justify` (`text_param`), `size`
and `tracking` (checked reads in `typecmd.rs`), `features`.
- `text.setRangeStyle`: `font`, `style`, `features`.
- `type.ruby`: `text`, `position`, `align`.
- `text.setPathHandle`: `which` must be "in" or "out".
Docs: docs/mcp.md.
dotCooCoo