A pattern's or a brush's art was copied into the document with new ids,
but the art of an opacity mask inside it kept the ids of the reader that
read the definition. Those ids could repeat ids of objects in the
layers. The mask art now takes document ids, as a symbol's art already
does.
Switching documents, or windows of a document, deactivates the Type tool, which clears the tool its double-click came from, so Escape after a later edit goes to the Selection tool. The field's comment and the two checklist rows now say so.
Spine::at_length computed tangents from flattened polyline chords, which
are piecewise constant and jump discretely between chords on curved
spines. Steps oriented to the spine with Align to Path stuttered at
large step counts.
Fix: store the original PathData in Spine and compute the tangent from
the original cubic at the true arc-length position via ParamCurveDeriv,
proportionally mapping flattened arc-length s onto each segment's curve
arclength using anchor_length values, instead of using piecewise-constant
chord directions.
Updated segment-selection condition in Spine::at_length to skip segments
whose flattened end is not greater than start before checking whether s is
within the segment. Preserve the existing final-segment fallback so
at_length(0.0) selects a nonzero segment and uses its tangent.
Added zero-derivative fallback tangent for blend-step sampling to keep
Align to Path from passing a zero tangent to atan2.
Added missing docstrings for Spine::new and Spine::length to satisfy
docstring coverage requirements.
Co-authored-by: Craft Bot <bot@storytold.dev>
Spine::at_length computed tangents from flattened polyline chords, which
are piecewise constant and jump discretely between chords on curved
spines. Steps oriented to the spine with Align to Path stuttered at
large step counts.
Fix: store the original PathData in Spine and compute the tangent from
the original cubic at the true arc-length position via ParamCurveDeriv,
proportionally mapping flattened arc-length s onto each segment's curve
arclength using anchor_length values, instead of using piecewise-constant
chord directions.
Updated segment-selection condition in Spine::at_length to skip segments
whose flattened end is not greater than start before checking whether s is
within the segment. Preserve the existing final-segment fallback so
at_length(0.0) selects a nonzero segment and uses its tangent.
Added missing docstrings for Spine::new and Spine::length to satisfy
docstring coverage requirements.
Co-authored-by: Craft Bot <bot@storytold.dev>
Spine::at_length computed tangents from flattened polyline chords, which
are piecewise constant and jump discretely between chords on curved
spines. Steps oriented to the spine with Align to Path stuttered at
large step counts.
Fix: store the original PathData in Spine and compute the tangent from
the original cubic at the true arc-length position via ParamCurveDeriv,
proportionally mapping flattened arc-length s onto each segment's curve
arclength using anchor_length values, instead of using piecewise-constant
chord directions.
Added missing docstrings for Spine::new and Spine::length to satisfy
docstring coverage requirements.
Co-authored-by: Craft Bot <bot@storytold.dev>
Spine::at_length computed tangents from flattened polyline chords, which
are piecewise constant and jump discretely between chords on curved
spines. Steps oriented to the spine with Align to Path stuttered at
large step counts.
Fix: store the original PathData in Spine and compute the tangent from
the original cubic at the true arc-length position via ParamCurveDeriv,
proportionally mapping flattened arc-length s onto each segment's curve
arclength using anchor_length values, instead of using piecewise-constant
chord directions.
Reviewed-by: craft-house-rules
Co-authored-by: Craft Bot <bot@storytold.dev>
Spine::at_length computed tangents from flattened polyline chords, which
are piecewise constant and jump discretely between chords on curved
spines. Steps oriented to the spine with Align to Path stuttered at
large step counts.
Store the original PathData in Spine and compute the tangent from the
original cubic at the true arc-length position via ParamCurveDeriv,
instead of flattened chord directions.
Adds a regression test walking 200 samples along a curved spine and
asserting each tangent step stays under 0.1 radians.
SVG export wrote an SVG filter as a live <filter> when its SVG 1.1 form
was at most 64 KB, without counting the region and id it writes into
it. A filter close to the limit came back over it, SVG import dropped
it, and the reopened object had no filter.
Export now leaves room for the id and the measured region, checks the
SVG 1.1 form the way import does, and counts each character past U+00FF
as the character reference Latin-1 output writes. A filter that does not
fit is exported as the other pixel effects are. The SVG 1.1 form and its
check are kept for the filters seen last, as checked filters already
are, so export does not check one filter again for each object.
Type that SVG text can't draw is written as outlines: vertical type, ruby,
right-to-left text, type on a path with an effect other than Rainbow, an end
bracket, Align to Path, Spacing, hanging punctuation, bullets or inline
graphics. Only glyphs bent along a path gave the outlined group a
`role="img"` and `aria-label`; every other case left screen readers and
search with no text. Each of them now names the group with its text.
Convert to Outlines still writes the paths alone, as before.
Inline graphics' placeholder characters stay out of the name, and empty
type gets none. An object whose id is its name also gets `data-name`, so
opening the file again keeps the name instead of taking the label.
Revolve gave each side face a normal as long as its profile edge, and
the mesh kept that length, so the glTF, OBJ and USD files of a revolved
object carried normals of any length (100 for a wall 100 pt tall). A
face whose edge was shorter than about 0.71 pt fell back to its corners'
normal, which turns inward when the profile is drawn the other way, and
its triangles then faced into the solid.
The mesh now scales every given normal to unit length before choosing
between it and the corners' normal.
Only a double-click on type from another tool records the tool Escape and
Cmd+Enter return to, and the Type tool keeps it until another tool is
chosen. Choosing the Type tool from the toolbar records none, so Escape
goes to the Selection tool. The type and UI checklists and the doc
comments on prev_tool, end_editing and claims_key now say so.
docs/type-parity.md held four copies of the point, area and path type
row, three of them with older Escape wording. They are one row again,
with the Type Orientation sentence that only one copy had.
`plugin.clearCache` without an id empties the cache of every plug-in
installed in the process. In the engine's library tests it could empty
the cache of another storage test running at the same time, and its
`bytesFreed` could count that test's cache. It now runs in
`crates/engine/tests/plugin_clear_cache.rs`, and the library test checks
that clearing one plug-in's cache leaves the other plug-in's cache.
The storage fuzz test starts each case with an empty plug-in store,
deletes the store when the case ends, and installs `fuzz.storage` with
`replace: true`, so the cases that shrink a failure install their
module.
docs/mcp.md says that files `plugin.remove` can't delete stay in the
folder renamed with `.removed` until the plug-in is removed again.
A path that keeps its shape because the effect would pass the geometry
budget holds a group's own placed gradients in place. A hidden path in a
layer, which the layer's bounds leave out, no longer holds them, so the
layer's gradient moves with its visible art. The art's own gradients
follow the same rule.
A freeform gradient whose points were edited keeps its vector fitted to
the bounds, so it did not count as placed and its points stayed behind
under a Transform effect and Free Distort unless another placed gradient
was in the same appearance. Its points now move like a placed gradient.
Align to Path moved the whole line by the largest ascent and descent
among its characters. Each character now moves by its own font, size
and vertical scale. Ascender runs the top of the font's em box along
the path: the ideographic em box that the font's BASE table gives, or
in a Chinese, Japanese or Korean font the one that its typographic or
hhea box, a one-em box-drawing cross or its ideographs give; else an
em box centered on the cap height. Descender runs the bottom of the font's
bounding box along the path, and Center runs a line at half the height
of the top of the font's H along it. In vertical type, Ascender and
Descender move the characters half an em, and Center leaves them on
the path.
Existing documents with Align to Path set to Ascender, Descender or
Center lay their type out at a new distance from the path.
Generic CMYK's tone curves now pass through the CGATS TR 001 tone value
increase of each ink at 40% and 50% (C 20.0, M 17.6, Y 16.8, K 21.6 at
50%), and its 16 Neugebauer primaries mix linearly, so a single ink's
tints gain as TR 001 gives. The 300% ink limit stays. The primaries, the
black-generation curve and the black point are VectorCraft's own values.
- The black point is 90% black under neutral CMY that fills the ink
limit: sRGB black separates to C75 M68 Y67 K90 instead of C67 M67 Y67
K100.
- Black follows a curve over the gray component of the black-free
solve, raised by how far that solve stays lighter than the target.
Grays from sRGB 177 up carry no black, and sRGB 128 gray separates to
C50.5 M42.2 Y42.0 K7.5 instead of C38.8 M26.3 Y29.9 K24.4.
- Display of CMYK fills, swatches and imported CMYK values and the
separation of RGB and Lab colors use the same model.
Paper white still separates to C0 M0 Y0 K0, but other separations
change, and so does the display of CMYK colors with ink. Tests that held
numbers of the old model are updated.
The 2,000,000-triangle limit on a 3D object's meshes is now checked as
each mesh is built, so an object past it is refused before the rest of
its meshes are built:
- Revolve counts each fill's and stroke's mesh as it builds it, instead
of building every one first.
- Inflate still solves every shape's membrane at once (the eye depends
on the highest puff), but builds each solid only when its mesh is
reached (inflate_meshes), so a refused object leaves the later
solids unbuilt.
- All the objects of one 3D asset share one budget
(three_d_meshes_of), so assets.export3D refuses an asset whose
objects pass the limit together.
Joining a Type 42 font's strings is charged per byte (as other bulk
copies are) before it runs, so data that turns out unreadable, read
again after leaving the cache, no longer copies for free.
widthshow matches a composite character by font number times 256 plus
its code; measuring Type 42 glyphs counts against the operation budget;
the Type 42 data cache keeps the least recently used order, remembers
fonts whose data can't be read and counts each font's data against the
memory budget once; composite font arrays are borrowed, not copied.
A composite (Type 0) font with the 8/8 mapping picks a descendant font
and a code in it with each pair of bytes (PLRM 3rd ed., 5.10). The reader
set its strings as type in a font of the composite font's name, the
bytes read as Latin-1 and at a thousand times the size, so EPS from
pdftops of a PDF with embedded TrueType fonts showed nothing, or one
black shape, where its type was.
Characters now go to their descendants: a Type 42 font's glyphs are drawn
from the TrueType outlines its sfnts strings carry (Adobe Technical Note
5012), by the glyph index CharStrings gives their names, spaced by their
own widths or the show operator's numbers; charpath and stringwidth read
them too. A Type 3 descendant runs its procedures, and a descendant found
by name sets its character as type at the composite font's size.
Found while testing crates/engine/src/cmd/typemenu.rs:614 (unicode_char)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The boolean's answer went through orient(), which judges each ring's
side from its first point. The boolean often starts a contour where it
touches another, so a triangle whose tip rests on a square's edge was
dropped, and an even-odd hole touching its outline was filled. The
boolean already runs holes against their outlines, so its rings are now
only turned as a whole.
Other fixes:
- A bowtie drawn as one contour has no area of its own. It was dropped
before the meet check and built nothing, although it fills both lobes.
Sampling now keeps rings with no area, and orient() drops them after
the check. Flat rings, every point on one line, fill nothing and are
still dropped, so a stray flat contour doesn't send separate art
through the boolean.
- An open subpath was closed along its end handles when the profile went
through the boolean, but straight otherwise, as the renderer fills it.
It is now closed straight before the boolean too.
- An empty union was taken as a refusal. Contours that cancel (a square
drawn twice under even-odd) built a square. They now build nothing.
- Contours meet within twice the boolean's own sweep tolerance,
computed by its rule from every anchor and handle of the path it is
given. pathops snaps anchors onto nearby heights before the sweep
joins edges within that tolerance, so contours up to about 1.4 times
it apart can come out as one; within twice it, every contour it
might join goes through it, even far from the origin, and the few it
leaves apart cost a boolean that builds the same shape.
- A one-anchor subpath draws nothing, so it is skipped, as the renderer
and the boolean skip it.
- A profile the boolean refuses reuses the rings already sampled.
Tests:
- touching parts and holes;
- an open subpath with handles, alone and beside crossing bars;
- a flat contour beside separate squares;
- contours joined far from the origin, including by handles alone,
and contours a few millionths apart near it kept apart;
- triangles snapped together and joined at 1.4 times the tolerance,
the same triangles left apart and kept whole, and the factor pinned
between 1.9 and 2.2 times, with the worst case just past twice the
tolerance left apart by pathops;
- a 24-bar grid: too complex for Extrude and Inflate, whole under Rotate;
- the merged rings turned as a whole;
- a one-anchor loop;
- the bowtie and the cancelling squares under all three effects;
- a 3,001-point star that the boolean refuses (TooComplex), built as
drawn.
Docs: the pathops README's Limits section now says only the try_
functions refuse, lists OpenPath and the caught panic, and describes
unite_all's answers, and which calls take a precision. three-d.md and effects-parity.md (the 3D row, its
history and status line) describe the merge and its limits.
The boolean that merges crossing contours cost about as much as the rest
of a plain extrusion, and it ran on every profile. Most art has no
contours that meet, so the profile is now sampled first (its point limit
checked there, before any boolean) and resolved only when two edges
cross, touch, run along each other or fold back, in one contour or
across two. Edges are swept by their left ends, within a pair budget past
which the boolean decides. Touching counts: squares sharing an edge
inflate as one puff, not two with a seam.
On a release build, Extrude of 120 separate contours takes 0.31 ms
instead of 4.18 ms; profiles that do cross cost what they did.
Tests: the meeting cases, squares sharing an edge, the fallback for a
profile the boolean refuses, Inflate's extent and area for the crossing
k, and the coincident circles' area. The hairline test now holds a
crossing pair so that its profile still goes through the boolean.
Docs: the merge is described once for all three effects, linking to a new
Limits section in the pathops README instead of repeating its limits,
and the point limit notes that a merged outline can have more points.
BFlat