A column's dragged width is now its width when the drag started plus
how far the pointer has moved since. Before, it was measured from the
sheet's scroll origin, so with the sheet scrolled to its right end a
held drag that narrowed a column kept narrowing it to 0 as the scroll
offset followed the narrower sheet.
A release that comes in the same frame as the last move now sets the
width to where the pointer was released, also for an edge dragged out
of view.
Entering the width Column Width already shows, with Enter, now sets
every column, the dragged ones too. Clicking into the field and away
without a new value keeps the columns' own widths.
effect.expandAppearance in Safe Mode left the art of a graph design in a
series out of the plug-in check unless an effect of the series group
itself would draw it. A raster effect on one of the group's fills or
strokes, such as a Gaussian Blur, also turns the whole group into an
image when it expands, art included, so a plug-in effect in that art was
expanded without drawing. Such a raster effect now keeps the art in the
check, and the command returns the Safe Mode error.
With the 3D and Materials panel and a classic 3D dialog both showing a
track cube, the two cubes shared one widget id, so the keyboard focus of
one moved the other, and a drag on one cube was read by the other: Escape
there put the first cube's settings into it, and its button-up check ended
the gesture before the cube being dragged saw the release. Each cube now
has its own id, keyed by its dialog or panel, and only the cube a drag
started on follows, restores or ends it.
Main's New Row and this branch's Add Color tool both make rows with no
current colors. A row made with New Row gives a rewritten color group no
color, and a color the Add Color tool adds joins the group. Rows the Add
Color tool adds now carry `added: true`: recolor.apply's default
groupColors and the dialog's apply_params add only those empty rows'
colors to the group, after the others, and recolor.randomize keeps the
flag.
Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic) take
shadingColor blackOverprint. Each face keeps its paint unchanged, and a
face that darkens gets black over it, as strong as the darkening of the
shading color Black: a fill multiplied and overprinting, and a seam
stroke overprinting with Darken. The black is on the black plate in
Separations Preview and is written to PDF as overprinting fills. The
Plastic highlight is not drawn with it.
Preserve Spot Colors draws its black with the same helper, so its seam
stroke no longer multiplies the black a second time along face edges.
The dialogs list the choice, with catalog rows next to Shading Color.
Params text, docs/mcp.md, docs/three-d.md and docs/effects-parity.md
describe it.
With Output › Convert to Destination (Preserve Numbers), and in PDF/X-1a,
which converts the same way, a gray or RGB image that carries an ICC
profile had its numbers read as sRGB: converted as sRGB to a CMYK
destination, and kept as they were in an RGB one. Preserve Numbers keeps
the numbers of untagged content only, so such an image is now converted
from its profile to sRGB with the color settings' intent, and then to a
CMYK or other RGB destination, the document's own RGB profile included.
- An untagged RGB image keeps its numbers in an RGB destination and
converts from sRGB to a CMYK one, as before.
- A gray image is converted to sRGB grays in an sRGB destination and
keeps its profile in the others.
- With RGB colors ICC-tagged as sRGB, the image is written as sRGB.
- A profile the color engine can't read leaves the image as it is in an
RGB destination, and its numbers read as sRGB in a CMYK one, with a
warning each.
- The table for an RGB destination is built only when the first tagged
image needs it.
When Profile inclusion is set to Don't Include Profiles (`profiles:
"none"`), gray, RGB and CMYK images are written in device color spaces
without their ICC profiles, and a JPEG that is kept as is loses its
APP2 ICC_PROFILE segments. PDF/A-2b, PDF/X-3 and PDF/X-4 keep tagging
their images.
Leaving the setting out keeps the earlier output. `profiles` now
serializes as null when not set, `"default"` clears a preset's value,
and Save PDF > Output lists Default first. Presets and stored settings
saved earlier hold `"profiles": "none"`, so exports from them now drop
image profiles.
While Crop Image shows its box, the Control bar has a PPI list (72, 96,
150, 200 and 300 ppi, with the ones above the image's own disabled) and a
PPI field, a reference point that X and Y name and that W and H resize
about, and a link icon that keeps W and H in proportion. A linked size
that would not fit the image is reduced with the other side in proportion.
object.cropImage takes ppi: the cut pixels are resampled to it, with colors
weighted by their alpha, and the image keeps the box's size. A box over
the whole image with a new ppi only resamples it, and an image scaled
differently across and down comes out with square pixels. ppi is refused
outside 1 to 2400, above the image's own resolution (300 ppi for a linked
image), and with trim. tool.setOption sets ppi, reference and linked for
the Crop Image tool and refuses values it can't use.
Docs: docs/mcp.md, docs/target-app-parity.md.
A row of the rows that aren't selected whose current color was given as a
color value (`[r,g,b]` or a CMYK, gray or Lab object) was left undimmed,
because only string entries went into the dimming map. Such a color now
dims under its color key, the form `recolor.apply` matches it by.
A region below Noise joined the color it shares the longest border with, so
the specks of a thin dark line on a light ground joined the ground and the
line broke into dashes. When that color is 10 or more apart from the region's
own (Oklab x 100), the region now joins the neighboring color nearest its
source pixels, among the colors sharing at least a tenth of the longest
border. A single pixel tied between colors still joins by border.
6 Colors and 16 Colors move from Noise 15 to 8, and Black and White Logo from
25 to 5.
When the Output settings convert colors, a color image whose pixel data
can't be read was left out with the "couldn't be converted" warning, as
if it could have been written in its own colors. Such an image can't be
written at all, so it is again left out with the "couldn't be decoded"
warning, as every other PDF export does. Only an image beyond the decode
allowance, or one whose header can't be read, is left out as
unconverted.
When a click's press lands in one face and its release in the next, the
drag fills both. The bucket now notes the fill every face the drag
crosses had before the press, the release included, so a double-click
or triple-click that follows on such a face compares that fill instead
of the one the first click gave it. This also holds when the release of
the last click crosses into the clicked face.
When the first click makes the Live Paint group, or merges the selection
into a selected group, the crossed face counts with the fill it was made
with: a kept face's paint from the merged group (an unplaced gradient
fixed to its fit), else the fill Make gives it, the topmost fill that
draws of the front-most source path over it that has one. A selected
group's edges no longer count as source paths.
A double-click whose two clicks land on two joined edges now paints the
edges joined through the other edge its clicks painted:
livePaint.strokeEdge takes `through`, edge ids that the join counts as
drawing with `match`, and the tool passes that edge. When the second
press lands on the next edge and is released back on the first, the
double-click matches the first edge's stroke paint from before the
first click.
A press that the view tools take (held Space, the middle button), or
that holds Cmd/Ctrl and goes to the lent selection tool, now counts as
a press that paints nothing, so the clicks around it are not taken for
one triple-click's: the session tells the tool through the new
Tool::press_elsewhere.
The tool doc, docs/mcp.md and the progress-doc line now say that a click
records an undo step only when it changes a paint, and that a
triple-click paints the faces that have the clicked face's fill (and the
edges that draw with the clicked edge's stroke paint) with the bucket's
paint.
Follows #7291.
In the Graph Data window, the pointer becomes a column-resize arrow
over a column's right edge, and dragging the edge sets that column's
width in whole digits, from 0 to 20 as Cell Style's Column Width
allows. The columns after it move along. Cell Style's Column Width, in
the dialog or set as the `width` field, still sets every column.
The dialog keeps the dragged widths in a `widths` field by column.
Each image of raster effects that Expand Appearance makes, at the top
level, for group members and for symbol instances nested in expanded
art, now draws from one budget of 1,024 images and 256 megapixels per
command. The pixels are counted before the image is made, from the
same region and resolution the image uses. An object or instance whose
image would go past the budget keeps its raster effects and stays as it
is. The result reports how many with `rasterLeft` and a warning, and
when nothing else expands the command fails with that message. A legacy
.ai save notes it the same way.