Opening a PDF with Crop To Trim Box put each artboard 36 pt after the
one before, while the bleed boxes round the trim boxes became the
document's bleed. With a bleed over 18 pt, one page's bleed reached
into the next artboard, and a page exported with its bleed showed part
of its neighbor. The document's bleed is now read from every picked
page first, and the artboards are 36 pt apart plus that bleed on both
sides, as linked pages on their trim boxes are laid out since #7723.
The editing copy of a large canvas wrote every envelope as its drawn
art. It now writes warp, mesh and top object envelopes live at 1/10 of
their size with the rest of the art, under the same checks as on a
normal canvas, and the reader opens them at their size from the editing
data alone or beside the PDF part.
Read from the editing data alone, a Large Canvas copy also gets:
- an envelope's saved box size compared with its contents at the
declared scale, so a bounds margin kept with Distort Appearance is no
longer lost;
- every path's stroke weight, dashes and dash offset at the declared
scale, not at 1/10.
A Glyphs panel cell whose glyph has alternates shows a small triangle in
its lower right corner. A click on it opens a pop-up of that glyph and
its alternates in the font's order. Picking one inserts the character at
the Type tool's caret drawn with that glyph, or draws the selected
character with it, in one undo step; the cell's own glyph inserts the
character as a double-click does. In Entire Font a glyph no character
maps has the triangle too, and a pick goes on the selected character as
a double-click on that glyph's cell does.
A pick is tried on a copy of the document first, so one the character
cannot be drawn with (All Caps, for example) changes nothing and the
status says why. A Select All over a threaded story is replaced as
typing replaces it. The triangle's size and the pop-up's eight columns
and six rows are VectorCraft's own.
The outline of the area an Eraser drag covers used the set Angle and
Roundness and varied the Size only with Pressure, while the release
(since #7726) erases with the tip the pen gives at each point on the
Pressure, Tilt, Bearing and Rotation modes.
Each step now takes the tip halfway between those at its ends, read as
the release reads the stroke. A step whose angle or roundness varies is
outlined where its own tip is round, and the parts inside other steps'
areas are removed as before. A pen turned in place gives the last step
the new tip, and a changed mode or Variation starts the outline again.
A round tip whose Size follows the pen shows each step that wide.
Random shows the value itself until the release draws it.
Export Text…'s save dialog in the desktop app offers two file types:
Text (the text file as before, still the first and default type) and
Shortcut sheet (PDF). The type picked decides the file.
The sheet lists the rows that have a shortcut, Tools and then a group
per top-level menu, each under a colored band, shortcut on the left and
name on the right. The groups flow down four columns of landscape Letter
or A4 pages, titled with the set's name. A row with several shortcuts
has a line for each, a shortcut too wide for its column is set smaller,
and a long name ends in "…". The sheet is laid out as a document and
written by the PDF writer.
shortcuts.exportText takes `format` ("text" or "sheet"; default text)
and `pageSize` ("letter" or "a4"). Without `pageSize` the sheet is on A4
when the current document prints on A4, else on Letter. A `path` is
written as given, as text without `format`, and a bad value is an error.
When `format` names a format, or the save dialog reports the type
picked, the name the dialog returns gets that format's extension, and a
file already at the changed path is replaced only after asking.
Docs: docs/mcp.md, docs/target-app-parity.md.
Type on a path whose frame starts with a repeat mark drawn as the
character it repeats is now written as outlines with a warning, as other
type on a path that a <textPath> cannot reproduce is. With Kurikaeshi
Moji Shori off it stays live text.
Follows #7338. Under colored lights, and under the classic effects'
shading, a gradient with transparent stops is drawn opaque on each face
under one opacity mask of its transparency. A gradient without a
placement of its own fitted its colors to each face's bounds, while the
mask fitted the whole solid, so the color and transparency ramps did not
line up and the colors started over on each face. Such a gradient is now
placed once on all of the solid's faces, grown by 1 pt, before it is
split into colors and mask. Opaque gradients and placed gradients are
drawn as before.
paint.invert and paint.complement given a group with a fill or stroke of
its own remembered the new paint of the first object inside it, while the
Fill and Stroke proxies show the group's own paint. The remembered paint
now follows the proxy: for each object given, in order, a group whose own
fill or stroke changed gives that paint, otherwise the first object inside
it that is not graph design art does.
ゝ or ヽ followed by U+3099, which a font draws as one glyph, is now drawn
at a line start as ゞ or ヾ would be, instead of as the plain kana. A mark
that shares its cluster with other glyphs, or with any other combining
character, keeps its own glyphs.
- EPS CCITTFaxDecode goes back to hayro-ccitt (main's filters.rs and data.rs):
craft-stream-codecs decodes /K -1 /Columns 70 data to other rows
(eps import::tests_images::ccitt_fax_images_draw). DCTDecode is main's again.
- The AI editing writer decodes through the image crate again: going through
RGBA8 lost 16-bit sources, so their 8-bit warning disappeared
(ai_editing::tests::sixteen_bit_images_are_written_at_eight_bits).
- Crop Image refuses an image over its allowance by header size again, with
main's "an image of W × H pixels is too large to draw" message.
- Test fixes: colorized_images writes its gray PNGs gray again, and the PDF
16→8-bit test expects rounding, as the 8-bit copy is made.
Reuse the panel deletion helper so the clicked swatch is deleted only after confirmation. Cover confirmation text, cancellation, clicked-item targeting and Undo across all five views. All 39 Swatches tests and all 13 local CI gates pass; fresh deep CodeRabbit review reports zero findings.
A frame of type on a path whose first paragraph continues from the frame
before now draws a repeat mark at its start as the character before it in
the frames before, as area and point type do. The mark keeps its advance,
so the glyphs stay where they were, and live SVG text writes the character
drawn.
paint.invert and paint.complement given a group whose own fill or stroke
changed, with only graph design art inside it, left the last color and
the recent colors as they were, because the remembered paint was taken
only from the objects inside the group. It now comes from the first
group whose own fill or stroke changed. A recolor that changes no
group's paint, such as the complement of a gray fill, remembers nothing.
A button beside the Help › Search Commands field opens a Recent Commands
list: the last five commands and tools picked from the palette, most
recent first. A command picked again moves to the top, so it takes one
place. Choosing a row closes the palette and runs it the way a pick of
the same result does, so dialogs, a dimmed item's reason and tool picks
work as before. With nothing picked yet, the list shows a dimmed No
recent commands row.
A command that is not available now, such as a filter of a plug-in that
is not loaded, is left out of the list but stays in the saved ids, so it
shows again when it comes back. The saved list keeps the last five
available picks and at most 20 ids in all. It is saved with the UI state
next to Recent Fonts.
While the list is open, its first row takes the keyboard, Up and Down
move through its rows and wrap at the ends, Enter runs the row, and
Escape closes the list before the palette.
Docs: docs/target-app-parity.md (command palette).
Fixes#6376
Vertically aligned area type in a frame that is not a rectangle flows its
text again until it settles, and each pass added the line-start repeat
marks to the layout's records once more, so SVG export could look up the
wrong character. Each pass now starts from empty records, and an undone
pass restores the ones before it.
The progress line said nested symbol instances leave nothing live after
Expand Appearance. It now names the 1,024-image and 256-megapixel
limits, the objects they leave with their raster effects and the
`rasterLeft` warning, and the test that covers them.
craft_image_codecs::probe_size only reads WebP, EXR and the GIF/BMP/TGA family;
for PNG, JPEG and TIFF it returns Unsupported. The cutover used it for header
sizes, so DXF export left every PNG out (cad tests), plugin objects lost PNG
pixels, and EPS image-mask and SVG import fell back to decoding whole images to
learn their size. vectorcraft_doc::header_size reads PNG's IHDR and a JPEG's
frame through craft-image-codecs and other formats through the image crate's
header readers, as main does, without decoding pixels. The SVG filter's JPEG
size comes from jpeg_info instead of a full decode.
Each line that started with a repeat mark scanned the paragraph's text from
its start for the character the mark stands for, so a paragraph with marks
at the start of many lines took quadratic time to lay out. The scan now
goes on from the line before.