A right-click on a selection that holds a path (a path, a group of
paths, a compound path, or anchors selected with Direct Selection) lists
Smooth…, after Join and Average… and the anchor entries when those are
listed. It opens the slider that Object › Path › Smooth opens, which
previews the result until OK keeps it as one undo step. With nothing,
only type or a group of type selected, Smooth… is not listed.
Docs: docs/mcp.md, docs/target-app-parity.md.
Clear, path.deleteAnchors, Cut, Copy and Cut Path scanned every selected
anchor or segment of a path once for each of its subpaths, so a path with
thousands of subpaths took time that grew with the square of their count.
The selection sets are ordered by subpath, so a new helper, subpath_refs,
reads one subpath's entries with a range lookup instead. The results are
unchanged.
With one selected interior anchor on each of 8,000 open subpaths of one
path, Clear took a median of 74 ms of thread CPU time before and 3 ms
after (release build, five runs each; the timings are noisy because the
CPU was shared and loaded).
Tests in delete_path_pieces.rs check exact surviving subpaths and their
order for anchor and segment selections across open and closed subpaths,
an untouched subpath, references to missing subpaths and indexes, one
Undo/Redo step and a second Clear, and Cut Path on several subpaths.
Without a plug-in store, plugin.install read the process grant once
for its later check and again for its approval. A grant another session
recorded between the two reads approved the module; when that session
revoked it before the install, the check saw the grant it first read
and the install recorded the revoked grant again. The approval now comes
from the first read.
plugin.install published the plug-in before it wrote the module and its
grant to the Plug-ins folder. A plugin.remove in another session in
between removed the plug-in, its file and its grant, and the install then
wrote both back, so the plug-in loaded with its grant at the next launch.
A session attaching the folder in between loaded the old version, which
kept running while the folder held the new one. plugin.remove, loads of
the stored plug-ins and loads of a plug-ins folder now wait until an
install has written the folder, and an install waits for them.
Docs: docs/plugins.md, docs/target-app-parity.md.
Assigning to a named child counts its list of the matching children, and
assigning through an empty XMLList counts the chain of targets it climbs,
before either changes the tree. copy(), toXMLString(), normalize(), the
`..` selector and the depth check on insertion hold the stack they keep
for each open level of the tree. Inserting an XMLList, and assigning one
to an item of an XMLList, hold their copy of the list's items.
copy() reads attributes in place, and toXMLString() reads attributes and
namespace declarations in place, instead of copying the lists. copy()
charges the declarations it copies before it copies them. Deleting by
name or assigning an attribute compacts the remaining links in place
instead of building a second list.
toXMLString() holds the set of prefixes a namespace lookup passes, and
picks a new nsN prefix in one pass over the declarations in scope
instead of rescanning them for each candidate.
The parser holds its open elements and their names, the text it gathers,
each tag's attribute values, the sets that check declarations and
attribute names, and its one copy of an element's namespaces, and it
charges the strings of the namespace declarations it makes. The
allowance it holds from the source's length covers the copy a value
takes as it becomes a string.
Comparing XML values, converting them to strings, assigning an XMLList
to an attribute, and reading a name, a qualifier, a namespace URI or
embedded text from a string built by joining strings flatten it with
flat_charged. An attribute name read from a string reserves its copy,
and an element name shares the string.
Docs: docs/target-app-parity.md.
An <image> whose EXIF orientation or TIFF Orientation tag turns or flips
its pixels, linked or as a data URL, is turned before usvg reads it: the
pixels are stored as they are shown, the width and height swap, and the
box fits the turned image under preserveAspectRatio, as CSS
image-orientation: from-image describes. A turned CMYK JPEG or TIFF keeps
its inks as a CMYK TIFF, as does a CMYK TIFF that is not turned.
- Data URLs of type image/tiff, and untyped TIFF bytes, are read.
- TIFFs with extra channels, CCITT Group 3 TIFFs and planar CMYK TIFFs
are read as Open and Place read them.
- Converted images decode within the decode allowance, and a TIFF that
claims more strips or tiles than the decoder can count is refused
before any decoder opens it.
- exif_orientation moves to vectorcraft-doc so Open/Place and SVG import
share it.
Tests: crates/svg/tests/it/image_orientation.rs.
Spine::at_length walked the first subpath's segments from the start
until one ended at or past the arc length, so placing every blend step,
spread key, blend widget and Objects on Path attachment cost one
comparison per earlier segment. It now searches the anchors' arc
lengths, which never decrease, and picks the same segment: the first
whose end is at or past the length, so an exact anchor length and
repeated lengths from zero-length segments keep their segment. The
point and tangent evaluation is unchanged.
Tests compare the search with the old walk on open and closed spines,
one segment, curves, zero-length segments, every anchor, both ends,
out-of-range and non-finite lengths, and check that a 4,096-segment
spine needs at most 13 comparisons.
193 Hindi rows outside the plug-in messages said something other than
their English: "a number of points" read as "many digits", swatches as
clocks, crop as a harvest, resolution as a resolve, and saving used
words the glossary replaces. Others left English prose in place,
dropped a clause ("to keep them all", "what follows it") or ran the
sentence backwards.
- Rows use सेव, स्वॉच, क्रॉप, रिज़ॉल्यूशन, पाथ and टाइप (for a text
object) as docs/localization-hi.md sets them.
- Values a command reads (enum values, preset names, OpenType tags)
stay as the English writes them.
- A test checks those terms and the point unit in every Hindi row, and
another pins rows whose quantity or clause was lost.
- docs/localization-hi.md, docs/localization-parity.md and
docs/target-app-parity.md carry the new counts and a wording note.
A justified area type line counted a tab as a word space, so it gave
the tab a share of its room that no glyph drew, and the line ended
short of its measure. A word-tab-word line ended short too.
- The text up to a line's last tab keeps its spacing, each tab keeps
its stop and its leader stays in its gap. The text after the last
tab takes the line's room: word spacing, letter spacing and glyph
scaling within their ranges, then its word spaces, or the gaps
between its letters when it has none. Kashidas go in that text when
it is one run.
- A tab separates two words, so Single Word Justification does not
align a word-tab-word line.
- Right-to-left lines take the text drawn after the last tab drawn,
measured as the line is drawn, and vertical lines work down the
column. Point type keeps its natural width.
Docs: docs/target-app-parity.md, docs/type-parity.md.
Distributing a story through threaded frames measured every frame but the
last with the whole rest of the story, and copied that rest several times
per frame, so a long story through many frames cost frames times story
length.
- The rest of the story is a borrowed view of the given runs (run index,
byte offset, length). Each frame's share is copied once; the slices,
styles of empty shares and the run left once the story is used up are
the same as before.
- Area type without Shrink Text to Fit whose lines align to the top is
first measured with the text through the end of the paragraph that
reaches about twice the previous frame's share (at least 512 bytes),
doubling while the story goes on. The share is taken when its text
stops fitting before the last paragraph break measured; layout places
lines in order, stops at the first that does not fit and shapes each
paragraph on its own text. Type on a path, Shrink Text to Fit, other
vertical alignments and a share ending in the story's last paragraph
are measured with the whole rest.
Tests compare every slice with the earlier algorithm, kept in the tests,
for many kinds of frames, styles and paragraphs and 12 seeded stories.
A story of 1,500 paragraphs (55,892 bytes) through 40 frames was laid
out over 2,126,762 bytes while measuring and is now laid out over
21,035.
$.fileName gave the file being run, so a function defined in a file
that #include inserted, in a file $.evalFile ran, or in an earlier run
of a named engine reported the calling file instead of its own.
- vectorcraft_js: HostItem::SiteGetter gives a getter the CallSite
(source tag, line, column) of the code that reads it.
- $.fileName maps that place through the run's source maps, or the
maps a named engine kept, to the file the code is in. It is empty in
code from a script given as source and in kept code whose map was
dropped. Code that eval or Function compiled still gets the file
being run.
Docs: docs/mcp.md, docs/target-app-parity.md.
The sweep filtered by transparency kept every open box in one tree, so
a box without transparency met every open box without transparency it
overlapped, though such pairs never join. Both sweeps closed an open
box early only when a later box held it, so in a nest of boxes that
share their left and top edges and get smaller to the right and
bottom, each box met every earlier box around it. One see-through
object inside 512 nested opaque objects took 130,817 meets in the
unfiltered sweep and 131,328 in the filtered one.
The filtered sweep now keeps open see-through boxes and open opaque
boxes in separate trees. An opaque box looks only in the see-through
tree; a see-through box looks in both.
In both sweeps, a box inside an open box it met, ending no further
right, is not opened when that box joins everything it overlaps (any
box without the filter, a see-through box with it). Whatever later
overlaps the inner box overlaps the outer one.
The nest above now takes 512 meets in each sweep, and a nest of 512
boxes alone takes 511 in the unfiltered sweep where it took 130,816.
The groups are unchanged.
The Brush libraries row named four libraries. It now names the nine in
BUILTIN order (crates/engine/src/cmd/brushlib.rs), as the Window ›
Brush Libraries menu shows them, and says nine built-in libraries.
A double-click on a paragraph style's row and the panel menu both open
Paragraph Style Options (ui.paraStyleOptions, paraStyle.edit) with its
seven sections. The type-parity and ui-parity rows still called it the
rename dialog and named ui.paramDialog with paraStyle.rename; they now
name the dialog, its sections and its tests.
The target-app-parity entry said each section has a Reset Panel. Reset
Panel is unavailable in General, and the entry now states that.
An image placed several times in an EPS file (the pieces of an envelope
or a Warp effect, copies of one image, a symbol's instances) wrote its
whole ASCII85 data at every placement: 200 copies for one envelope at
the default fidelity, enough for a large photo to pass the 256 MB page
limit and lose pieces.
The samples of such an image are now written once in the setup as
VCim<i>, and each placement reads them from there:
- Level 3: a ReusableStreamDecode stream, rewound with resetfile and
read through a new FlateDecode filter at each placement.
- Level 2: an array of strings of at most 49,152 compressed bytes, fed
to RunLengthDecode by a procedure.
An image placed once is written where it is drawn, byte for byte as
before. The page limit counts a repeated image's samples once, and a
colorized image is reused per ink.
- With art, the bar is 10 pt tall and the Edit tab leaves out the gaps
above the wheel and above the sliders. The dialog is as tall on the
Edit tab as on the Assign tab, and all of it but the color chips fits
a 1024 by 576 screen.
- recolor.weigh counts a use for the first row that is not excluded
when an excluded row lists the same color first.
A separator that ends a group of the Control bar's controls is now painted
only when a control follows it in the bar. When the groups after it are off
in the panel menu, do not apply to the selection or the tool, or have no
room in the window, the bar ends with its last control. Two separators with
nothing between them (the artboard Transform link and the artboard Align
group, or tool options and the envelope controls) show as one. Each
separator keeps its room, so the groups keep their places and widths.
- Fill and Stroke, Opacity and Graphic Style, Character, image and Image
Trace options, the Mirror & Cut, Crop Image, Puppet Warp and shape tool
options, the artboard Transform link and the envelope controls draw
their outer separator through group_separator. Paragraph and area type
vertical alignment end through group_end, which draws its separator
through boundary.
- Regression test: no_separator_is_left_at_the_end_of_the_control_bar
sweeps window widths from 300 to 1500 points for each case.
A paragraph format given to the empty paragraph after a frame's last
paragraph break was lost when the story flowed again: the paragraph is
shared with the next frame's first paragraph, and the next frame's old
style replaced it, in that frame and in the frames after it.
- The thread reflow also notes which frames' last paragraph changed
style, and story_paras_restyled keeps that style against the next
frame's unedited first paragraph, across unedited empty frames too.
When the same edit formats the next frame's first paragraph, that
format applies, as before.
- story_paras keeps its behavior for its other callers.
- Tests cover area type and type on a path on either side, a next frame
holding text, three frames, undo and redo, a format that changes
nothing, and numbered list counts.
dotCooCoo