A graphic style dropped on the Graphic Styles panel's Delete Graphic Style
button is deleted the way the button deletes: after asking, or at once with
Alt held, in one undo step. The button takes the drop with no style
highlighted and is outlined while a style is held over it. A highlighted
style brings the other highlighted styles with it; art linked to a deleted
style keeps its look and is no longer linked. Other drags are ignored.
Docs: docs/mcp.md (graphicStyle.delete), docs/target-app-parity.md.
The band test now also sums the samples traced gray for bands 3 and 4
pixels wide blurred by 1 pixel (about 60 of 336 over the three grays;
16 without the sharp-edge stop) and for bands 4 pixels wide blurred by
3 pixels (about 39 of 192).
across_edge decides from the first step alone whether one side's edge is
sharp, so each side's path is walked once. On 856 code-drawn band and
stroke cases and 39 images the results are the same as before.
The docs count pixel centers instead of pixels, write "0.6 pixels"
throughout, give the parity line's band claim its bound of 1 in 16, and
state again that a light gray stroke 6 or 8 pixels from black keeps its
gray because its pixels do not reach black in 5 steps.
Text on more than one line is placed a line at a time at every
alignment, and each line splits where an advance that tracking can't
give puts its characters, as a single line does. An underline or
strikethrough also runs on to the end of a line's last advance when
tracking can't reach it.
While a stop is dragged on the Tabs panel's ruler, the canvas draws a
line through the text whose stops the ruler shows, where the stop would
land. For area type it crosses the frame cell the paragraph starts in,
measured from where the first line starts (inside the inset, or past a
text wrap object); for point type it crosses the paragraph's lines from
the type's origin. It turns with rotated type and runs across the
columns of vertical type. In a Ctrl-drag (Command on macOS) it follows
the grabbed stop. No line shows while a release would delete the stop,
and it goes on release, Escape, when no button is down, or when the
panel is not drawn. It is not a document object and records no undo
step.
A stop drag whose release the ruler does not get now ends once no
button is down, as a marker drag already did.
The help page describes this guide:
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/manage-tab-stops.html
Its extent, color and the rules above are VectorCraft's own.
When a key with a hold shortcut is pressed and released in the same
frame after a chord with Cmd, Ctrl or Alt, the key no longer waits: it
goes back to the frame, which handles it as it does with Hold Shortcuts
off. Its tap no longer runs before the chord, so Cmd+Z followed by X in
one frame no longer undoes X's change instead of the earlier edit.
object.blend.options wrote the first selected blend's spacing, orientation,
type, ramp and shift onto every selected blend, whatever the call gave. Each
blend now takes only the values given and keeps its own for the rest, through
one closure used for the selection and for `id`.
- `id` edits that blend alone. A hidden or locked blend and an object that
is not a blend are errors, and the blend's own spine decides whether
easing is allowed.
- A call that changes no blend records no undo step.
- The Blend panel's Ramp and Shift sliders share one helper: a drag
previews on the canvas and records one undo step on release, instead of
one per frame.
Builds on #8022 by ruchirguitar.
Docs: docs/mcp.md, docs/target-app-parity.md.
A double-click on a new color or Pick from Swatches turned the dialog into
the Color Picker before the Color Groups list was drawn, so that frame drew
the window without the list. The window then remembered the narrower size,
and when the picker closed it came back off center for one frame and moved
95 points to the side. A right-click on a row in that frame missed the row.
The picker now opens after the list is drawn, and the window keeps its size
and position. A new test checks the window's rectangle while the picker is
open and in each frame after its Cancel.
The test looked for the app bar's search icon by its old name. The bar
now shows a search field named "Search commands" in its place, so the
test finds and clicks the field.
Preferences › Appearance of Black's output options read "Rendre tous
les noirs…", which calques "render". They now read "Reproduire tous les
noirs…", the printing sense of output; the display options keep
"Afficher".
The Vector Halftone dialog's Screens choice (Mono or CMYK) read
"Écrans", the word for a display. It now reads "Trames", the French
term for halftone screens, next to the dialog's "Linéature".
Part of #7991. Reported by bortekfr.
Direction Handles cleared the selection and then added each path on its
own, and each add searched the paths already selected, so building the
selection took time that grows with the square of the path count. The
command now selects the paths with one Selection::set call and adds the
anchor sets in one extend. The selection is the same: paths keep their
order, a repeated path keeps its first place and its last anchor set,
and the side fields are cleared as before.
crates/engine/examples/direction_handles_bench.rs times both ways on the
same paths in one process. With 20,000 four-anchor paths, building the
selection takes 1.9 ms of thread CPU time against 69 ms one path at a
time.
Centered or right aligned text on more than one line was placed by the
span of all its advances together, so a second line moved the first.
Layout also leaves the tracking after each line's last character out of
the width it aligns, so one object can't align every line by its
advances. Such text now becomes one point type object per line, each
aligned by its own advances and placed on its line's baseline. Left
aligned text stays one object.
Optimize to File Size… under Preset opens rows for a desired size in K (1024 bytes), Start With
(Current Settings, Auto Select GIF/JPEG) and, with slices, Use (Total of All Slices, Each Slice,
Current Slice). OK takes the settings whose files fit, measured by encoding, and the dialog shows
the size found or says that no setting tried fits.
- webExport.optimizeToFileSize searches JPEG quality or GIF/PNG-8 colors, then GIF lossy 100,
encoding at most 32 trial settings. A lower value can give a larger file, so it measures up to
6 values spread over the range before it narrows the step. It writes no file and changes no
remembered setting.
- A desiredK that is missing, not a number, 0 or less, or above 1048576 is an error, as are an
unknown startWith or use and a bad slice.
- The slices share one setting, so every Use choice changes all of them.
- The result line is dropped when the art or the selection changes.
Docs: docs/mcp.md, docs/target-app-parity.md.
WebP Options has a Compression menu (Lossless, Lossy) and a Quality
slider from 0 to 100 that is enabled for Lossy. document.export,
document.serialize and Export for Screens take lossless: false with
quality (default 90) and write a VP8 file, with an ALPH chunk that keeps
the alpha exactly when some pixels are not opaque. Lossless stays the
default. A WebP quality above 100, or one that is not a whole number,
is refused with an error.
The encoder is the one craft-image-codecs already provides; no
dependency changes. The note that lossy WebP isn't available, its
catalog rows and the format text that described it are removed.
The print raster stopped after two halvings, so a 2,048-pixel print seen
far out sampled a 512-pixel level and fine art aliased. It is now halved
down to one pixel, and each halving weighs an odd last row or column by
the part of the print it covers, so an edge color does not spread across
a small level.
A swatch whose name starts with # could not be the inside color, and one
named like a hex color drew that hex color. The inside is now looked up
as a swatch first and read as #rrggbb only when no swatch with a plain
color has that name.
A print tipped away from the view shrinks up and down but not across, so
the level of the print raster is now chosen by the longer of a pixel's
two sides in flat terms, not its width alone, and fine print lines no
longer alias when the view is tipped.
The board's inside and outside colors were premultiplied by their alpha
and then drawn with full alpha, so a see-through color drew darker
instead. The depth buffer treats every panel as opaque, so the board is
now drawn opaque in its colors' RGB and their alpha is not used.
The tray test now checks that each wall's print faces away from the base
on its own side and that the walls fold below the base.
The Clear Actions confirmation, "Delete all action sets and their actions?", gets a Gujarati row next to the Clear Actions and Reset Actions rows, using the catalog's words for action set and delete.
The Navigator panel menu item View Artboard Only is renamed View Artboard
Contents Only and is now on by default. While it is on, the thumbnail
fits the artboards and draws only the art inside them: art on the
pasteboard and in the gaps between artboards is left out, and a shape
that crosses an artboard's edge is cut there. Before, the option only
narrowed the thumbnail to the artboards' bounding box, so art in the
gaps and past an artboard's edge still showed.
The choice is kept with the UI state for every document, instead of
being lost on restart. UI state saved without it reads it as on, and a
saved off stays off. A user who wants the pasteboard art in the
thumbnail turns the menu item off, or runs
ui.navigatorPanelOptions {viewArtboardContentsOnly: false}.
- ui.navigatorPanelOptions takes viewArtboardContentsOnly (true or
false; any other value is an error and changes nothing) and answers
{color, solidDashes, viewArtboardContentsOnly}.
- The renamed label has a row in every catalog that had the old one.
Docs: docs/mcp.md (Navigator panel options), docs/target-app-parity.md.
The filter kept the list it found while the clock stayed before the instant the list may change at. When the system clock was set back, a family dated after the new time, or one whose 30 days had ended, could stay listed. The filter now also remembers the time it found the list for and finds the families again when the clock goes back before it.
When a wait starts and ends in one frame and a key typed before it opens
a dialog, the frame's key events and texts are taken from the position of
that key's first event (its press, or its text when the text came first),
not from the event that ended the wait. An Enter pressed between the two
no longer reaches the dialog.
While Alt (Option on macOS) is held, the Save PDF dialog's Cancel button
reads Reset. Reset (or ui.dialogReset) puts every option back to the
chosen preset's settings, clears the passwords and their checkboxes, and
leaves the dialog open with its preset, path, artboard range and section.
A saved preset deleted while the dialog is open leaves the options as
they are.
Choosing a preset now also clears the Security section's password
checkboxes, which stayed checked with an empty password before.
The Transform panel measured the selected objects' Align to Pixel Grid state on every frame, looking up each object and its parent and collecting their ids. With Select All in a large document that cost tens of milliseconds a frame. The state (on, off or mixed, and whether every object can be aligned) is now kept in the canvas cache for the document's uid and revision, and the ids are listed only when the box is clicked.
The Actions panel menu gets Clear Actions, after Replace Actions… and
before Reset Actions, and the new command ui.actionSet.clear. It asks
first; OK deletes every set with its actions, the built-in Default
Actions set included, and Cancel changes nothing. Afterwards no set,
action or step is selected, and an open Set Options, New Action, Batch
or step dialog that names a set closes. The question passes the ids of
the sets it asked about, so OK deletes nothing when the sets changed in
the meantime. The item is off with no sets and while an action records
or plays. No undo step is recorded, and an empty panel stays empty after
a restart.
The command palette's search icon is labeled "Search commands, tools,
panels and effects" since 44f75df965. The two application bar tests
still looked for "Search commands and tools", so the narrow-bar test
saw Arrange Documents without the search icon at every width.
Follows #7608. Text from EMF, WMF and EMF+ pictures was laid out with the
font's own spacing, so the per-character advances the file gives
(ExtTextOut's lpDx, EMF+ DrawDriverString glyph positions) were dropped.
- Characters are spaced by their advances as tracking, with pair kerning
off. When a ligature forms at one tracking and breaks at the next,
standard ligatures are turned off for that text.
- On a single left to right line, an advance that tracking can't give
(wider than its range, or a tab) starts a new point type object where
the advance puts it, also between the letters of a ligature the
tracking breaks apart. An underline or strikethrough is filled across
the space between. Right to left and multi-line text stays one object.
ExtTextOut: https://learn.microsoft.com/en-us/windows/win32/api/wingdi/nf-wingdi-exttextoutw
DrawDriverString: https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-emfplus/b794b780-e9a8-4682-af65-9b614aecfbe6
With Rectangle, Rounded Rectangle, Ellipse, Polygon or Star active, a
double-click on a visible corner widget of a selected live rectangle or
polygon shows and selects the Transform panel (window.panel.activate),
wherever it is: closed, docked behind another tab, floating, in an icon
column or in a dock hidden by Tab. A second double-click keeps it on show.
The tool, the selection, the document and the undo history stay as they
were. Pie widgets, spots off the widgets, Line Segment, plain paths and
hidden or angle-excluded widgets do nothing; the Selection and Direct
Selection tools keep their double-click behavior.
Tools return the new Action::Panel, which the engine forwards as
UiRequest::Panel; the desktop app activates the panel, and a headless
pointer_gesture reply carries {"panel": id} in its requests.
Docs: docs/ui-parity.md (#5477 row, also correcting its statement that the
bounding-box handles scale only with the Selection tool) and
docs/target-app-parity.md.
craft-image-codecs moves from a499742a93 to 3af718585c on craft-libs main.
It brings in storytold/craft-libs#1758: a deep EXR file with more than one
part now finds each part's chunks after every part's offset table, and an
offset table that runs past the end of the file is an error.
The move also brings in the other merged changes to craft-image-codecs and
the craft-jpeg, craft-metadata and craft-tiff copies it uses: #1646, #1686,
#1837, #1838, #1867 and #1889. #1774 moves DDS reading and writing into the
new craft-dds crate, which adds BC4 and BC5 textures. The other craft-libs
crates stay at their current revisions. craft-svg keeps its own
craft-image-codecs at 431f704478, which it only uses for PNG, JPEG, GIF and
WebP images.
While Alt (Option on macOS) is held, the dialog's Cancel button reads
Reset. Reset puts the remembered settings back, or the defaults when none
are remembered, on the current document's active artboard. It drops a
pending preset, a pending Done left by a Done that failed, the preset name
being typed and the selected color table entry, and keeps the view, zoom,
connection speed and path. It does not remember or write anything, and the
dialog stays open. `ui.dialogReset` does the same.